Transporting the washing machine - not an easy task. To save the printer operation at the new location, its transportation must meet certain requirements.
Before transporting necessarily a good host will prepare the machine. First of all, you need to turn off all communications, then drain the excess water, fix the hose and the power cord on the body, screw the legs until it stops. Then you need to do the drum and the protection of the body from damage.
drum Fixing
An important step in preparation is to fix the drum to prevent its rotation, and the chance of breakage. If you keep the default equipment, you can use the standard mount, otherwise will have to turn to the means at hand:
- The transit bolts that are included with the purchase of cars. Bolts must be screwed into the holes located on the rear of the unit. This is the most reliable option provided manufacturer's instructions.
- Foam, old clothes or foam. To lock the drum need to disassemble the back cover by unscrewing the screws. After that fill the void prepared material and back panel into place.
In any case, to carry the washing machine without screwing shipping bolts or the use of alternative methods of blocking unacceptable.
proper packaging
Before packaging, sensitive to breakage, corners and washing machine control panel is desired to glue adhesive tape in multiple layers. To safely move better to take home box. But if after the purchase was a long time, it is unlikely to survive.
You can ispolzvovat following:
- stretch film;
- dense fabric;
- corrugated cardboard.
If the hand is their foam blocks can also be used by fixing the corners. On top of that protection is wound fabric or film is prepared. Secure packaging homemade help rope or several layers of a conventional adhesive tape.
Such improvised protection is not very reliable, so the move is recommended to be careful not to allow significant speed especially on bumpy roads.
Transport the washing machine
Securely packed stiralku can be transported. It is important to follow the following points:
- Take out the device from the house for loading into the machine in a vertical position with a slight slope.
- Just place the apparatus into a vehicle in an upright position.
- Securely fix loaded into the back of the device, to prevent movement of the trip.
In a way you need to be careful: smooth ride, low speed. Even fixed multikilogram device is capable of causing damage to itself or the vehicle.
Useful tips on transportation
All work will be carried out manually. You must cares for portable devices. Try not pereklonyat on its side. You can not turn the bottom to the top, the damage may be irreparable. Boot methods in vehicles are dependent on the type of the latter:
The truck unit can be transported in a standing position, most importantly secure it in the back. It is easier to do with a large number of things that you can hold down the device and limit its mobility.
It is more difficult to safely transport the machine in the passenger car, especially in a small version of it. But in this case, there is a way. The device is securely mounted to the drum can be placed in the cabin or trunk lying. Permissible to put his side a place at the rear.
When you select any of the options you need to consider some nuances:
- transportation of the washing machine in a prone position is required to remove the powder cuvette or carefully it dry, residual moisture from it may fall on the electronic control panel and disable it;
- when placed lying in the back of a truck will need a soft substrate, even in cases where the body protected with foam pads or a thick cloth, it will be an additional shock absorber with shaking at potholes;
- Some models are not safe to put on its back or side, in units Zanussi filler valve is located close to the counterweight in such a position, the valve is likely to be broken;
- Make zheskie drum mount that would not cause irreparable damage.
Under no circumstances can not install the device the top cover downward. In the inverted position is a risk of engine failure to mount. In this case the transport of the washing machine can result in its complete and final failure.
If no other options, cargo in such a situation is possible, but only when the engine is dismantled and completely dried system.
Another position where the transfer unit without damage will be difficult to face down. it fraught breakage controls the front panel, the protruding portions of the loading opening.
What happens if you fail to comply with transport regulations
Properly organized transportation - the guarantor of the safety of the washing machine. Negligence or deviation from the recommendation fraught complete breakdown of the device.
In the best case, it will have to spend serious money on troubleshooting. It can be:
- breakage or deformation of the plastic and metal elements of the housing;
- protective cuff rupture loading hatch;
- failure of his sheds;
- breakage or damage to the electrical cable;
- rupture pipes and hoses;
- contact closure and wiring;
- fault dampers within the housing;
- breakage of the protruding portions control panel;
- cracks on the display;
- failure of the drainage pump;
- tampering with the container for sliding the powder.
It will help avoid such troubles proper preparation for the trip. No matter how the device is located, lying in a horizontal position or installed standing, you must securely fasten all movable elements, to protect all sensitive parts to breakdown design.
