Technology applying the plaster woodworm: photo examples, instructions

Forroom decoration and the facade of the building can be used a variety of materials. Very popular plaster woodworm, which allows a unique form textured surface. Such a composition claimed in the decoration of public buildings and private houses. The walls look beautiful, if respected technology plastering woodworm. Photo examples will pick up suitable option for the facade of a specific building or premises, decorated in a particular style.

Looks like plaster woodworm: real photo and composition

Getting to the finishing works and selecting the appropriate option, many are asking: what is pitted plaster, and where it can be used. The distinguishing feature of this material is the formation of texture, appearance resembling surface pitted bark beetle.

Composite plaster consists of a base powder to which the granules are added. Their size depends on the composition of the particular composition and purpose and may be 1.5 - 4.5 mm. Special application technology enables the decorative material to form a layer with a sufficiently clear chaotic pattern.

Attention! The size of the granules determines the composition of consumption: the greater the granularity, the more material is required.

decorative plaster It can be used in facades buildings, as well as walls and ceilings indoors. It can be applied to a base made of concrete, brick, drywall and most other materials used in the construction industry.

Composition of the material depends on the purpose and trademark. Each manufacturer strives to improve the technological and operational characteristics plasterOffering material with varying concentration of components. As a basis, as the generally used acrylic or plaster, to which is added a certain amount of natural marble chips or cement.

Attention! Acrylic composition is completely ready for use. Plaster based on gypsum is prepared immediately before application.

The mixture was made without plasticizers and solvents. The added particles contribute to enhancing the bonding effect. The composition of the polymer filler developed by each manufacturer individually and largely determines the sequence of execution.

The proposed formulations are divided on:

• Mind. Offer for interior and exterior use;
• Performance. Certain compositions exhibit high impact strength to a number of factors;
• Structural features. May form a specific pattern on a finished surface;
• Astringent properties. It can be divided into tsementnopolimernye, mineral and polymer.

The basis of mineral or tsementnopolimernyh compositions comprise cement or gypsum certain type. This plaster with characteristics similar to lime-sand mixture. It is able to maintain their properties in extreme cold (up to -50 ° C) and elevated humidity level. It retains the qualitative characteristics of at least 6 - 7 years. An affordable cost. For coloring, use mineral paint, as the cement is very good at absorbing pigments.

The main component is an acrylic polymer compositions. Due to this plaster it has a high level of ductility that facilitates the application and prevents cracking of the formed coating. Formed coating is able to last for 15 - 20 years. The colorant may be added to the composition immediately prior to application on to surface, which allows to change the hue directly during operation.

Attention! Polymer compositions are finding use in the painting and decorating indoors. For facades better use of cement-based compositions.

According reviews pitted plaster has high performance. It has:

• Light weight, which reduces the load on the supporting structure;
• fire resistance;
• Environmentally friendly. It can be used in the performance of finishing works in the building;
• Durability. Over the entire period of operation the decorative layer retains its appearance unchanged;
• Resistant to atmospheric precipitation. Correctly formed coating is not afraid of considerable temperature fluctuations;
• Resistant to slight mechanical stress. Appearing in operation to surface contamination can be easily removed;
• Affordable cost.

Scope plaster woodworm

Those who are familiar technology of application of decorative plaster, woodworm can be used in the performance of finishing works inside and outside the building. For each surface will pick up composition with a suitable grain size, allowing to form a beautiful decorative coating. A well-chosen picture and color will help to achieve the desired effect for any grounds.

Finishing facade bark: the nuances and features that are worth to know

Given that the coating formed in operation is exposed to a large amount of negative factors, many worried about how to apply the bark beetle in the facade so that it can be kept for as long as a presentable appearance view.

Facade plaster woodworm must be placed on a level Stopper base. Acceptable presence height differences of not more than 2 mm, but only if the particle size included in the plaster does not exceed a specified size. To this end, the base should be cleaned of all existing contaminants and thoroughly primed. Usually, primer is applied in two layers.

Attention! The prepared composition dries quickly. The number of trained staff should be optimal for plastering the façade of a certain area.

If you have to finish the facade of a large building, it is necessary in advance to open a sufficient number of packages and mix. In the finishing process is applied to pitted house facade spraying and then triturated with a spatula, performing motion upwards. The spatula should be placed at an angle of 40-50 degrees to the ground. After the additive composition of the deposited mass remaining on the instrument is sent in a specially prepared container. For further use of it is not suitable, because otherwise we can not guarantee an even distribution of the components of the bark beetle.

When decorating the facade of a large building work should be carried out a brigade consisting of 2-3 people. You can also use the supercharger, allowing mechanize the process coating composition.

Attention! Partial decoration of one wall of the building facade is not allowed. Break 5 - 8:00 necessarily lead to the appearance of the section line.

Check out the photo finish of the facade bark beetle, to ensure the attractiveness of a given composition. When you select should pay attention to the appointment of a particular brand. For exterior finishing composition with desirable to acquire large granules (greater than 2.5 mm), allowing to form a suitable pattern.

Features of use of the composition for interior walls

The lack of precipitation in the building, reduces the requirements to the compounds used. However, if the width of the room is relatively small, the appearance of the formed coating may deteriorate under constant mechanical action. To the wall as long as possible keeps its appearance to that formed by the decorative layer to meet a series of requirements:

• Resistance of the coloring composition. In case of accidental contact with the walls on your hands and things should not remain traces of paint;
• Environmental Safety. It is unacceptable the presence in the components that can be harmful to human health;
• Resistance to moisture and household chemicals. In this case, minor contamination can be removed with detergent.

If required plaster for interior works, woodworm better to choose the granules having a diameter less than 2.5 mm. This will form a neat pattern, capable of harmoniously fit in interior premises. However, this requirement can not be considered binding. If you want to see on the walls of the original relief, you can select part of a larger granules.

There are requirements for the preparation of the substrate before application of the plaster. It must be aligned. Each manufacturer specifies requirements for the preparation of the grounds for the application of the plaster, which should be read before using the product. To eliminate the occurrence of hidden defects, do not allow large temperature fluctuations and the appearance of a draft.

Related article:

Decorative plaster for interior walls. The composition and coating types, manufacturers, examples of decorative mixtures as prepared independently, application instructions - in this material.

Technology applying the plaster woodworm: Process photos and nuances that are worth to know

Beautiful appearance of the formed coating makes us think about the possibility of applying plaster on its own. Those who decided to abandon the help of professionals, it is necessary to know in advance how to apply a decorative plaster woodworm, to form the desired pattern. Attention deserves the cooking process used and the composition tool. With the right approach is required to be able to form high-quality and reliable coverage that will last for many years.

How to make plaster woodworm own hands: the sequence of actions

How to woodworm, fully described in the attached instructions for each blend. Most often, the work is done in the following sequence:

Picture	Description of work
	In a clean container are added quantity of water at room temperature is sufficient. The required volume is shown on the packaging.
	Gradually added to the dry mixture while stirring carefully composition. The addition of the composition in small portions to avoid the formation of lumps. At this stage it is possible to add a dye to form a coating has a uniform color throughout its thickness.
	The solution was thoroughly mixed and continuously to achieve the desired uniformity;
	Capacity leave for 10 - 15 minutes;
	The solution was stirred. In prepared with their own hands pitted plaster should be close to the consistency of mashed potatoes.

Attention! The final composition already has the required consistency. It is not necessary to add water.

Flow plaster woodworm per 1 m2 depends on the thickness and composition of the formed layer characteristics. Relevant data are specified by the manufacturer on the packaging composition. On average, for a square surface finish require 2.5 - 4 kg of solution depending on the grain fractions. You can navigate to the following values ​​for dry mineral composition:

Tip! Increase the calculated value of 5 - 10% in order to guarantee enough composition to form a coating of sufficient thickness.

Make a video decorative plaster pitted his own hands

If you are having difficulty in the preparation of decorative plaster, is to get acquainted with the video. Detailed master class, which describes in detail the sequence of works, allows you to see optimal consistency of the composition.

Purpose and features graters for plaster

Plaster is applied on a finished surface by means of various tools. Initially construction rule used by which creates a direction for subsequent alignment mixture. Trowel and allow smooth poluterok formed flaws and to remove excess solution which may be present on the surface.

Next, use a grater to the bark beetle, which allows to form a completely smooth surface without flaws and defects. Depending on the area of ​​processing and financial opportunities can buy a grater made of:

• Tree. Such a tool has a simple and small design of the service life due to high coefficient of moisture absorption;
• Plastic. The tool claimed for the occasional performance of work. When applying the composition should not perform rhythmic movements. It allows to form a thin layer;

• Foam. The most affordable option, which enjoys a certain popularity. Easily broken by a slight impact. Relevant for professionals. Beginners should pay attention to other tools;
• Polyurethane. Optimal solution. Suitable for beginners and professionals. The grinding portion is different sufficient mechanical strength. deciding perform finishing with his own handsWorth buy polyurethane grater;
• Rubber, sponge and latex. Polishing element is hard and soft. aluminum or plastic used for the housing;

  

• Metal. Characterized by long life.

When you purchase a tool you can give preference to instruments made of any material if it comes to the execution of single works. If you want to float it lasts as long as possible, the best choice is a metal tool.

Application of decorative plaster woodworm: step by step instructions and tips

Before the start of finishing work should define the flow plaster woodworm to calculate the required number of bags or buckets of plaster. All information can be found on the packaging of the material.

It is important to not only know how to bark beetle plaster, but general guidelines for the implementation of works:

• For those who are engaged in finishing the first time, you should definitely work out at the designated surface or on the back of the front of the house;
• A preferred period finishes is spring and autumn. The relatively low temperature in the period will ensure uniform drying of the layer;
• An hour before the start of work, it is desirable to moisten the base.

Knowing how to properly apply the bark beetle, it is easy to perform surface finishing of any size. The spatial position of the base is not important. The plaster can be applied to walls and ceilings.

The main steps of plastering technologies woodworm are as follows:

Picture	Description of work
	Preparation of the base. It should control the strength and smoothness of the base. Level desirable to apply in several places. The higher the quality of the base preparation, the better the result.
	One day before application Bark foundation soil. Preference is to give the adhesive compositions containing fine filler. This layer will improve the quality of the basic structure of coupling with a smooth surface.
	Preparation of necessary materials and tools.
	Mixing the desired consistency of the mortar. Should be guided by the instructions of the manufacturer.
	Tinting composition in the selected color. Subsequently, the surface may be further dye to improve the result. The addition amount of caramel must be in the range set by the manufacturer to prevent deterioration of the characteristics of the plaster. Dyes may be added to the water-dispersion pigment spots or soluble pigment powders.
	Uniform distribution of the composition on the surface of the wall with a trowel or a wide spatula. The thickness of the formed layer should match the size of filler included in the composition of plaster. Excess material does not allow to generate the desired texture.
	Formation of the invoice with a plastic float. A tool with a small force is applied to the formed layer. Making up and down movement, left-right, or in any other desired direction, form the desired texture. It is important that the force applied was the same in the whole area of ​​a finished, otherwise the character of the drawing will be different.
	Is applied to the material. plaster surface It follows from corner to corner without interruption. If for some reason, work must be stopped, paste the masking tape, which is then applied to overlapping plaster.
	Without waiting for curing the composition, the tape is removed. The result is a smooth layer, which continue to operate in the future.
	Padding and staining. It is performed not earlier than the day after plastering surface. Choice of composition depends on the performance of the jobsite.

Technique of bark with his own hands: video helps to understand the nuances of

To form a high-quality coating, it is necessary to master the technique plastering. The method is capable of applying the composition have a serious effect on the texture of the formed layer.

When plastering bases can be used a method of applying:

• "Rain." It moves Grater continuously up and down, left and right, or diagonally. Video allows you to understand the nature of the traffic passes;

• "Twirl". The tool during formation of the coating makes a circular motion. The included video tutorial will enable to master the technique;

• "Carpet". When applied sequentially alternated movement up and down and right-left. An illustrative example will allow to master the technique of application.

Nuances bark painting in two colors: features of the process

Getting finishing work, should prepare the composition of a certain color. In this case, the formed coating will have the same color and thickness will last much longer. If we introduce the dye into the plaster for some reason it is not possible for some reason, paint the walls in the desired color can be later. However, you should first get acquainted with the nuances of determining the staining process.

Before starting work, prime the substrate is not necessary. Primer layer must be completely dry. After plastering of the walls should wait at least twenty-four hours, during which the formed coating will dry completely.

The painted surface is better align after complete drying of the paint layer. The coating formed by using a tinted composition, poorly to mechanical stress, and can appear on the walls of characteristic traces mashing.

Before starting work, everyone wants to see where and how the bark beetle is painted in two colors. Videos enable advance to see the final result, in order to understand whether or not to use this method of staining the walls.

The essence of technology lies in the fact that the first surface is coated with a composition of dark and then light. The latter is applied poluotzhatym roller to prevent its accidental leaking into previously designed grooves.

If it would be desirable to improve the appearance of the formed layer can be further colored surface layer cover lacquer. Ingredients can choose any kind. Available not only matte or glossy lacquer, but also containing some sequins.

Price plaster woodworm: a review of the leading manufacturers

Price per bag of plaster woodworm depends on many factors, including its main features and the company's products. Before choosing a specific composition, should review all the existing proposals to buy at the lowest price composition having the desired characteristics.

Price facade pitted plaster: a review of proposals leading manufacturers

The cost of finishing material in the selection plays an important role. Given that a large number of surface processing material is required. Price facade plaster for exterior bark beetle depends on the manufacturer. We suggest to familiarize with the average prices in advance to make it easier to choose the appropriate composition:

Picture	Name	Particle size, mm	Average price, RR.
	Bergauf DEKOR	3	520
	Litokol LITOTHERM GRAFICA	1,5	670
	DALI-DECOR «bark» XXL	3,5	2 000
	Ceresit CT 175	2	2 600
	Ceresit CT 35	2,5	660
	TEROL Decor 1.0mm "bark"	1	480
	Eunice Coarse bark beetles	3	540

Plaster for interior: offers leading manufacturers with prices

Costs for interior decoration depends on several factors. Particular attention should be given to the compositions and the brand manufacturer. Price pitted plaster Ceresit acceptable to many. At the same time, there are other brands that are worth to know prior to selecting the appropriate options:

Picture	Name	Particle size, mm	Average price, RR.
	Ceresit CT 64 Koroed	2	1700
	Ceresit CT 63 Koroed	3,5	1650
	Knauf Diamant Koroed 2.5 mm	2,5	350
	Knauf Diamant Koroed 1.5 mm	1,5	350
	Bases Ekstervell bark 2mm	2	410
	Weber. Min 2.5mm Koroed	2,5	500
	Weber. Pas Akrylat bark	2	2 600
	Weber. Pas Silikon bark 2mm	2	3 800

Plaster woodworm price per m2 of work: a review of the existing proposals

If the self-applied makeup is not possible, you should use the services of professionals. Before the contract is worth to get acquainted with all offers, as prices vary within a wide range.

When finishing the surface of the decorative plaster woodworm cost per job m2 on average 250 - 340 rubles. This value is not definitive. If the plaster is applied on the grid or beacons - prices will increase. Apart from the immediate finishes may require:

• Dismantling of old plaster (170 rubles / sq.m.);
• Pomyvka facade high-pressure apparatus (60 rubles / sq.);
• Monolayer priming high-pressure apparatus (90 rubles / sq.);
• single layer painting (180 rbl. / Sq).

List of works agreed individually in each case. Turning to the company, you can draw up an estimate to know the total cost of the work.

FGRT decorativeOh plastersand bark beetle selecting a suitable option for clearance walls inside and outside the building

Select the appropriate option for your home can be difficult. In this case you should familiarize yourself with ready-made solutions. Perhaps those who choose for the house plaster woodworm, photo facades of private houses will help you choose an interesting solution. The walls can be painted in one color. Mounting contrast drainage system It will provide a unique solution.

If you want something unusual, instead of single-ended, you can use just two. A winning look contrasting colors. The photo facade pitted plaster adds effektnosti due to its texture.

If you do not want to take a contrasting compositions, can be selected color similar in tone. The building will look as impressive.

Often pitted plaster used for decoration room interior. In this way, they can get off all the walls, only one wall or ceiling.

Ready photo plaster woodworm in the apartment suggests that the option of finishing at the actual design of the walls of the loggia or balcony. Due to the high performance characteristics of the composition fails to form a strong and beautiful decorative coating. Such decoration is able to serve even long enough to not heated loggia.

After application of the coating can be treated with lacquer or wax. Such compositions are able to add gloss walls.

Summary

Plaster woodworm rarely used in the decoration of the facades of public buildings. The choice in favor of a strict color and shade will not achieve sufficient formality. Most often, such a composition is used in the design of residential buildings. Each can independently perform the required amount of work by reading technology plastering woodworm. Photo process will sort out the details. Observing technology and using high quality materials you can make presentable structure on more than 10 years.