Mini room for questioning: dignity, ready-made models, building

Often the plots involve only the construction only of vital structures. A small portion of the area, the use of each piece of land for planting or thoughtful landscaping just do not leave room for additional buildings. In this case, the release for fans of bath treatment there is only one way out: the construction of the mini-baths. What is a mini-sauna for questioning as it built and what you need it for construction - let's deal.

Mini room for questioning. Advantages and disadvantages

The main advantage of a mini-bath is occupied at its construction site area. The second, equally important parameter is the cost of construction of a mini-bath cottage.

To create a bath It does not require a lot of building materials. bath can be purchased as a ready-made, in "turnkey" condition and build yourself. It does not require any long-term experience with the tool or any special skills of the builder.

The advantage is the small baths buildings fitting into almost any landscape, Miniature bath structure, very often the sophistication of stylistic forms.

The drawback of such baths is only one - it is a small inside area. Most often, these baths are paired with the living room. Compartment for washing is often combined with a steam room or does not exist in principle. These baths are not designed for a large number of visitors, 2-4 persons is the maximum for the mini-baths.

Small bathhouse in the country - it's comfort, convenience and savings in one structure. Although with limitations in size and space.

Important! Particular attention in the selection frame construction technology garden need to be paid to the vapor barrier materials and moisture-proof insulation. Insufficient steam can lead to rapid destruction of the structure of small-bath.

Building materials

The traditional material used for bath woodBut, because of the emergence of new materials and technologies are spreading, and other building materials. Mini bath based on the following technologies:

• Frame-panel and frame construction method;
• Construction of round logs or timber;
• Shaped beam;
• Bath Barrel. The original form of the mini-baths of the board.

Due to low weight of the structure and allowed lightweight foundation: Columnar type, screw piles melkozaglublennye or strip foundations. Bath barrel does not require the presence of a large complex foundation.

To cover the roof fit soft roofing materialsBut in some cases it is advisable to use metal roofing or other coating. It all depends on the preferences of the owner garden and its possibilities.

Insulation must be selected on the parameter of water resistance as well as the impact of water vapor it can have a negative impact. As a vapor barrier should be applied foil materials.

Frame Mini Bath

construct carcass mini-bath with his hands just enough. Let us examine the construction of the technology in stages:

1. Drafting mini-baths. plan selection, placement. Calculation of material and shipping costs.
2. Construction of the foundation for the construction of baths. Prefab buildings have a relatively low weight, so to build such a bath is enough melkozaglublennogo columnar or strip foundation. Consider the need for its vertical and horizontal waterproofing. Otherwise, possible deformation and destruction of the foundation material under the influence of moisture.
3. Erection of skeleton timber. In this case, it is recommended to use only high-quality, high-quality well-dried lumber. When using raw lumber and board in the future possible frame deformation.
4. Sheathing frame outside. For this option to use either a board (in this case the bath operation is possible only in the warm season, because of the high heat) or CAP (using oriented strand boards Bath much better retain heat, but at the same time increase the cost of construction due to the use of more expensive materials plating).
5. Thermal insulation of buildings. Best suited mineral wool or foam. It is important that heater I had a moisture resistance and was not hygroscopic.
6. Vapor barrier. In today's market of construction materials with a wide range of materials for the vapor barrier. The main task of this material - to prevent the formation of condensation inside the bath wall. First of all, pay attention to the roll vapor barrier materials, they are easy to use and does not require special skills during installation. It has proved effective foil paroizolyatory.
7. Paneling inside. For the pair is recommended to use natural wood. For this purpose, suitable pine or aspen, but can be finished with a steam room and larch, linden or alder. Finishing bath inside it is a question of finance, and personal preferences. dayroom sheathed with any moisture-resistant material, including wood-based composites. The main requirement for it - the moisture resistance. You can enhance this characteristic of the material using a special chemical impregnation.

   

8. flooring. floor boards in the steam room should be packed with a gap. This is necessary in order to provide free of moisture out. In some cases, the flooring is better to make removable.
9. Mounting of roof material. can be used for roofing or metal roofing soft roofing materials.
10. installation engineering: Oven in the steam room, fan, Faucets and other equipment provided by the project.

Finished projects framed mini-baths is in the network, in addition possible to create such a project commissioned by the construction organizations. But sometimes, in the project of a mini-bath with his hands, the draft framework and combined baths just combined.

We offer to view video frame construction of mini-baths, quickly and inexpensively:

Important! When you purchase a timber to check its quality. Timber for construction should be well dried and do not have the geometry defects.

Bath from boards

Summer bath of boards is a variant framing baths for plating which is used board. Like the skeleton, room of boards with their hands erected quickly and simply. construction technology is similar to a conventional frame bath, with one exception: instead of OSB panels for exterior cladding used board. budget savings is quite significant, especially if used for sheathing board edging. At the same time such a structure are less durable than with the use of composites and has a large heat loss than assembled using panels.

During the construction of baths should pay attention to heat and vapor barrier. The more high-quality materials used in construction, the longer the steam room.

Laying boards on the wall should be carried out overlapping. Such a procedure would allow stacking make the wall more dense and reduce heat loss when used.

Before you can build a bath of boards with their own hands, should attend to the selection of lumber. For plating bath inside better to use wood of coniferous wood (pine or larch), while for the outer skin is better to use aspen. She is quite low thermal conductivityThat will allow the bath to retain heat longer. Particular attention should be paid to the vapor barrier. Dampness is the worst enemy of wood.

Important! In the design and construction of the baths do not forget about its ventilation!

Bath Barrel

The original structure, which is quite elegant and stylish look to any environment. Mini Bath barrel - a Finnish invention, in this case the bath structure is constructed as a cylinder lying on its side. It is not required to fill this solid structure or continuous footingAs well as a cylinder based on the number of backups.

The amount of such small baths (2 to 6 meters in length), a small weight of the structure. For information on how to build a sauna barrel with his hands can be found in the following video:

Construction Technology baths such seemingly simple enough. Assemble the frame sheathe decking, installed on the support and favor. But actually bath barrel is a complex construction, for assembly work that requires skill with the instrument, accurate drawings and calculations. If there is a desire to put on the site of a bath, it is best to contact the company for their construction.

Bath barrel cedar round 3 meters

What you need for a bath?

The most essential component of the bath relaxation - it oven. In the market there is a large number of mini-ovens for the bath. But possessing the skills of welding and inverterCan cook oven and independently.

Usually mini-oven for small volumes are metal structure intended to generate steam. As an example, consider the furnace bath Barbara "Mini".

The stove mini Barbara Kamenka

This wood stove with dimensions 48h66 cm and a height of 88 cm. Steel structure itself of the furnace top is covered with a casing, inside which channels are convection. The air heated in the combustor through openings in the housing comes into the heater, thereby rapidly Raskalov stones. As a result, the oven heats up very quickly warming up a small room in a very short time.

In addition there are also more simple designs of furnaces in which the heating of the heater is carried out directly exposed to heat from the combustion of fuel. Using the steam room mini-oven for a bath on the wood, You need to provide a place for the storage of fuel, woodpile or a canopy near the baths.

For small volumes of steam, in some cases it is advisable to use electric stoves and sauna heater.

On a note! Installation of the heat exchanger on the flue will quickly warm up the air in the steam room. But such an option is possible with the corresponding dimensions of the bath.

Mini-pools for bath

Additional installation in bath basin It will expand the functionality of the bath and add comfort. It is worth noting that the pool bookmark better originally envisaged in the bath design, as mini-pools for the bath require summing water supply, water drainage, heating.

For this reason the insertion of the pool in the bath finished dealing fairly troublesome and costly. There are several types of pools to be installed in the bath:

• Stationary. In this case, the pool was initially put into the bath draft, under it sees pit pool wall and concreted covered by decorative cover. This type of pool is used mainly for full-size boathouses.
• Font. Metal or plastic construction designed for installation in a prepared bed. In order to introduce it into operation only requires a connection to the water system font.
• portable pools. Metal construction with plastic trim. As well as the font installed in the prepared bed, and then connect to the water system.

Swimming pools can be equipped with water heating systems, hydromassage equipment, but in this case is required to enable the help of qualified professionals.

Mini-sauna for questioning

sauna from the bath differs form of steam and temperature. In order to make enough steam sauna installed inside steam electric steam generator, sauna heater or boiler Sauna on firewood. When using a steam sauna it is recommended interior from one species of wood: pine, linden or alder. Mini sauna in the country should be as closed, almost airtight. Particular attention should be paid to its insulation. It is necessary to maintain a high temperature for a long time in the sauna, at the lowest cost energy source.

portable sauna

How to build a small bath to give their own hands

Before the erection is necessary to familiarize with the projects already built baths and choose the best option. Projects mini-baths to give your hands (and frame, and lumber) are fairly common, and finding them is not working. Before you build a small bath with his hands need to determine the type of bath, the material for its construction and location.

After all the organizational issues are resolved should proceed directly to the process of construction. In the first place to build the foundation and pour the foundationAnd then proceed to the construction of walls, roof and interior decoration.

Related article:

The foundation on screw piles with their hands. This technology is used to accelerate the construction is not too heavy buildings and other architectural structures. In this article you will find a step by step construction of structures and useful advice from professionals.

The basic requirement during the construction - it's accuracy. Everything should be done quietly and slowly. This will allow to build a sauna in a short time without any problems at work.

Useful advice! When purchasing materials for construction focus on medium and high price range. Soft materials for roofing, insulation and paroizolyator purchase of pre-calculated estimate of + 10% on the stock material.

An important point in the construction of a bath - do not forget ventilation. For the pair of small volume is sufficient channel in the wall of the fan installation is required for larger premises. This is to ensure that our small room in the country was the site of a comfortable stay, not a peddler of miasma.

Related article:

Bath with his hands. Projects, photos, video, design, site selection for placement, step by step instructions on construction, how to make indoor lighting, useful tips and tricks - all this in the material.

Where to buy mini-bath and inexpensive price "turnkey"

The cost of construction of the bath depends on many factors. The first cost of construction depends on the materials and equipment, as well as the delivery price and the construction site. It will be convenient to order a ready project for a mini-bath villas, buy disassembled and assembled on site. The cost of the structure depends mainly on the size and configuration. Average prices for the purchase of bath equal, so that the contractor should choose, based on the reviews on the qualification of employees and the quality of work produced by this company.

Project Name baths	bath size	Price "turnkey", without delivery	wall material	Roof	Equipment
Bath «Russian» SUPER	2,3h4 m	169000 rubles.	Frame, an imitation of timber wall.	Soft roof	Oven "Rus-9" steel pallet 0,8h0,8 m
Bath "Liu Banya"	2,3h4 m	129000 rubles.	Frame, wall imitation logs.	Soft roof	Oven "Rus-9" steel pallet 0,8h0,8 m
Bath Mobile "Scandinavia", a complete set "Original"	2,4h6 m	179000 rubles.	Frame, an imitation of timber wall.	Soft roof	Oven-bath heater "Rus-9" Stainless: water tank 55 V L, chimney sandwichdeflector
Mini Bath "Baby"	2x3 m	82000 rubles.	Whole timber drying chamber 135 × 45 mm	Soft roof	No

From the table above it is clear that you can buy a bath for giving "turnkey" inexpensive, but should take into account the delivery of material to the construction site. Also not included in the cost structure foundation. Work on the construction of strip foundation costs an average of 10,000-12,000 rubles. But it is possible to save the budget at the expense of the construction of the installation or columnar pile foundation.

Can be ordered separately to give a bath, buy cheap oven and equipment for saunas. This variant is advantageous in that there is a choice to fit your tastes equipment.

Photo small baths in the country with their own hands

This section contains interesting solutions masters bath Affairs - photo mini-baths for a summer residence with his handsCreated for individual projects.

1 of 6

In conclusion, we can say that the construction of a mini-bath to give realistic idea, both in financial terms and in terms of working with their hands. It is necessary and important to note that the construction of a small bath-house on a country site will take a little time and effort, but at the same time ensures a comfortable feeling free in the evenings. We hope that our small review will determine the choice. Well, if you have experience in the construction / purchase or have questions, we invite you to participate in the discussion.