Shelf for hanging wine glasses - both functional carrier for the kitchen or the bar, and an element of decor.
Holder for glasses represents a structure consisting of parallel rails for which are fixed and the objects themselves.
The practical purpose of the suspension for glasses - protecting glassware surfaces from stains, fingerprints, and all that can occur with wine glasses brittle if not properly stored. This system helps in the case of lack of space in the room.
This is a comfortable way to store wine glasses.
As an element of decor hanging shelf can complement the interior of the kitchen or the bar-room, and with proper clearance - even serve as its key element.
It is set on the table, speaking in the kitchen cupboard.
Content
- 1 What kinds there are shelves for wine glasses?
- 2 Accessories for railing
- 3 What does make a hanger for glasses
- 4 holders coatings for glasses
- 5 Popular manufacturers of dryers for glasses
- 6 VIDEO: Holder for glasses in the kitchen interior.
What kinds there are shelves for wine glasses?
The main types of storage systems a few glasses.
- Shelves for glasses on the bar.
On mounting type, they are divided into the following types:
The shelves of the central type. In the middle they have a hole for fixing the pipe on each side - notch stemware legs.
They generally circular shape or made into a taper.
Swivel shelves. They have the ability to rotate around its axis, with a special attachment. If necessary, this shelf can always be removed to the side. They are round, conical or in the form of hangers.
Such a suspension for glasses is convenient to use a small bar.
Important! Sometimes any system for storing glasses, including shelves, mistakenly called railings.
Reiling (A railing of the English - railing) - a tube or rail, with bindings that allow you to store glassware. Usually it is mounted on the wall or bottom of the cabinets. Bar tube - also railing. But ordinary board dryer for glasses, or shelf where the glasses are so called is a gross mistake.
Holder for glasses on the railing.
- Holders for glasses with fastening to the opening of a furniture shelves
In the absence of the bar to the pipe-fitting, the release could be deposited stemware via attachment to the furniture open shelf. For this purpose, various hooks or hangers. Dryer glass glasses hanging effectively looks illuminated.
This embodiment is very convenient in order to save space, while it looks stylish, adding a bright accent to any interior.
For the interior in the loft (the more correct name - "neo-loft" or "industrial style"), is well suited to make the hands of the regiment, covered with dark varnish, chrome fixtures. For registration in vintage style suited carved shelf with hooks and hangers-colored copper or gold.
Holder for hanging glasses attached to any flat surface.
- Suspended reylingovye system with ceiling
Such an embodiment is not too prevalent. It is a horizontal railing attachment directly to the ceiling, with two or four vertical supports. But the disadvantage of this method is its low functionality and inconvenience for storage of glasses. It is used more as an element of decor. Practical ceiling system in a grid on the brackets, to which hooks are attached. But Reiling call it impossible.
As the base may act closets, attics, the ceiling of the bar or kitchen facilities.
Accessories for railing
Sam railing to mind is a bit like an ordinary cornices.
Suspended structure may be made of a shiny or brushed metal, wood, glass, and plastic.
But the final form it is given the following accessories:
- Plugs - they are mounted on both sides of the tube or rail. If the railing runs along the walls and in the corner area of a gap (reylingovye rails are not connected to an angle of 90 degrees), the plug must be installed necessarily, otherwise the design will look unfinished.
- Brackets-holders.
- Fastenings for glasses - the basic function of the railing. Mounts can be of different types. For horizontal railing often it hooks or hangers. In the central and rotary structures, with a vertically standing pipe on the bar, a round rack with holes glasses.
- Accessories - shelves, mesh, dryer.
The most important advantage of this system is the ability to set holders for dishes without the presence of the bar.
What does make a hanger for glasses
Currently, the choice of materials for the manufacture of a very wide railing. Below are the main types of them.
This kind of holder design makes it possible to fix a suspended glasses along the wall.
Stainless steel. This is the best material for the storage wine glasses. It is resistant to all detergents and cleaning products, and is not affected by moisture.
Steel is the most common and reliable.
Plastic. Roof made of plastic are inexpensive, since the material is very cheap. But they can not withstand a lot of weight.
Service life of plastic articles relatively short.
Aluminum and brass. Lighter compared to stainless steel, but have a shorter life.
It fits into any design and will look stylish.
Attention! Racks of aluminum can not extend to a greater length. They need to be divided into sections, or railing deformed. Therefore, for such a large area is not an option.
Wood. Wooden rails are part of the decor in the interior in the style of Provence, vintage, country. If they are covered with high-quality varnish, it can last for a long time. Most often, wood is used in ceiling systems.
The device may produce their own.
Glass, usually anti-shattering. Such holders are looked particularly well when made of colored glass, and is installed inside the illumination in the high-tech.
Comfortable and storage device for glassware.
holders coatings for glasses
There are different types of coatings for the holders. Their main purpose - to protect and extend the durability of the material from which made the roof rails. However, they have a decorative function. You can pick up a suspension with a coating system that is most harmoniously fit into the interior.
Chandelier with glasses suitable for large rooms.
Chromium. A brilliant chrome finish for the holder of the most common. These coatings are easy to clean and wash because of the smooth surface.
They are particularly relevant for the kitchen or a room in the style of hi-tech, loft or modern.
Aluminum. Aluminum tubes look good in a room bar or kitchen in the style of "play." There are holders for wine glasses, made in the form of water pipes. Usually, they are made to order.
They can be used at the bar, decorated in the style of steampunk.
Bronze. Cheap variant - when spraying of bronze is placed on the tube or rail made from conventional ferrous metal. But it is not worth saving, because the coating has a protective function, and by the action of water falling on the carrier tread rust. Better to choose imitation bronze to stainless steel. Fit roof rails with bronze coating facilities in a classic style or the style of Provence.
In the latter case, a substitute for bronze gold-plated, which in the kitchen of Provence should be abandoned.
Gold. Such tubes as made "bronze", subject to scratching. It is best to book or buy railings covered with matte gold plating or imitation with scuffs and scratches. So damage if they appear, will not be evident. Not recommended for such holders, if you want to arrange a room in the style of Provence, high-tech or loft. There they will look ridiculous and out of place.
Matt or polished brass the most appropriate in a classic style.
Satine. Unlike chromium, a satin matt coating. Simply put, chromium simply reflects the other surface, without having its own color. Satin coating usually gray tint. When seen under a microscope, then such a coating will be visible micro-scratches made in the same direction. This serves to create a matte finish that will not shine like chrome.
These accessories are used masters to create comfortable conditions for the reception of guests in the kitchen.
Popular manufacturers of dryers for glasses
Cheapest suspension systems for the storage wine glasses are usually made in China. They are reasonably priced, but will be short-lived. Typically, spraying is applied to an ordinary ferrous metal, or plastic.
The range of shops there are a large number of mini-bars and other devices, and if desired, can be made holder for glasses with their hands.
German manufacturers. Among them Kessebohmer firm best known for - a company that produces kitchen accessories since 1957. Holders of its most expensive production in the mass market, but the most high-quality and durable. The coating is applied to them galvanically, which gives greater coupling to the substrate than sputtering.
Desk Stand is used in the home. This creates a comfort, to receive visitors.
Italian company Eureca and Lemi. They offer a wide range of holders with a dusting of gold, bronze or brass. For example, there is a whole collection Lemi railing plated brass. However, the method of coating - a simple sputtering.
Czech company Tescoma. Its products are not worse than the Italian.