A great replacement cumbersome small thermos will thermoglasses. Initially, a glass thermos devised for outdoor activities: hiking, fishing. Then we began to produce the container, retaining the heat with a refined design.
For all the lovers of hot tea or freshly brewed coffee, it is very topical issue of such a compact tableware accessories such as thermal mug.
Content
- 1 How does thermoglasses
-
2 Variety of glasses-thermoses
- 2.1 Distribution The volume of glasses
- 3 Housing materials and flasks
-
4 opening the way to
- 4.1 Thermoglasses with a valve-cap
- 4.2 Cover-stopper
- 4.3 Screw cap
-
5 appointment
- 5.1 Children thermoglasses
- 5.2 Heat-resistant glass for cars
- 5.3 Thermos-cup coffee
- 6 Additional features thermoglasses
- 7 How to use a glass thermos
- 8 How to choose a quality model thermoglasses
- 9 Popular manufacturers of heat-resistant glasses
- 10 VIDEO: Big comparative test termokruzhek.
How does thermoglasses
This is a double-walled cookware: the body and the inner bulb, the sealed rubber stopper. air layer retains heat well beverage winter, summer cold temperature for 5-6 hours. Outside the glass thermos with hot coffee, tea, chocolate is not heated, it can be easy to handle. In fact, it is an analogue of a small capacity thermos.
In such a container can be poured cooked house coffee or tea and take on the road.
Variety of glasses-thermoses
Manufacturers offer a wide range of colors and shades, classic and original design.
Distribution The volume of glasses
Small thermoglasses accommodate all liquid glass - 200 ml. The maximum capacity of heat-ware - liter. There glasses-flasks at 300, 400, 500, 600, 700 ml. Some manufacturers produce rates commensurate with iron banks: 0.33, 0.46 ml.
You can run into the nearest coffee shop, order a coffee to go in Thermomug and enjoy them on the go.
Important: The larger the cup, thermos, the better the temperature is maintained. Sending a child to school with a 200 ml glass of hot tea or coffee, do not worry. For breakfast drink a little bit cool.
Housing materials and flasks
The following materials are used for the body.
- The plastic is the lightweight version. Suitable for students, motorists, mothers strolling with children. The disadvantage is considered fragility. On the polymer surface scratches remain, they are able to break at unsuccessful fall. The obvious plus - a small price.
- Ceramics are much heavier than plastic, glass thermos therefrom with a thick wall, the liquid is heated to 60 degrees, keeps the temperature for 4 hours. It is better to buy for the car, office or home, where the risk of damage to the body less. Fans of outdoor activities is better to choose something else.
- Borosilicate glass looks gorgeous, but not as strong as metal. To care for a glass of the double-walled easily, can be washed in the dishwasher.
- Stainless steel - the most versatile and durable material for housing. Mainly used for hiking termokruzhek.
Metal long retains the look, easy to clean.
For the record: some manufacturers evacuated interior space between the glass walls, the thermal conductivity decreases, tea or coffee will remain hot longer.
The flask-thermos cup made of glass, stainless steel, plastic. Glass considered hygienic material, does not absorb odors, tea black scurf well scraped off from the inner surface circles. Metal flask practical, but it darkens over time. Thermal plastic requires careful handling. From abrasive detergents Coble appear deep scratches, which will accumulate bacteria.
Thermos mug - this is an analogue customary, known since ancient times, a thermos, but in a reduced volume, taken from modern materials in the original design.
opening the way to
Thermoglasses tightness depends on the density of the cover fit. Developed several open-close lid mechanism.
The average volume of such vessel is a 250 ml beaker is more than a circle.
Thermoglasses with a valve-cap
The vessels are opened by pressing the button. Mechanism works quickly, keeps tight. Open and close the valve easily insulated cups. The only negative - the cover design is difficult washed. Over time, silicone or rubber seals appears sour-smelling bloom, difficult to get rid of it.
Thermos arranged so as to prevent the loss of heat and its liquid outlet to the outside.
Cover-stopper
Holds the cover lock or latch. At the top there is a hole, which is opened by turning a small plate. From such a drinking tableware can be on the move, the glass turns into a thermos neprolivajka. Manufacturers warn that transporting containers with lids plugs needed in a horizontal position, to not leak the contents.
congestion is not a perfect tightness.
Screw cap
A threaded connection is considered the most reliable seal tightly to the edge. The vessel can be placed in a backpack, carry with them in the car without inserting into the cup holder. The disadvantage of such a cover - it must be open with both hands.
Drink on the go will not work.
appointment
Small energy-saving container Buy:
- office workers in their coffee brought to the dinner will be hot;
- parents of schoolchildren, kompotik hot chocolate will give strength after tedious, strenuous exercise;
- young moms for themselves and their children, walk with them will be more comfortable;
- motorists pass the time in traffic jams;
- truckers, lovers long journeys.
Used special materials and a vacuum layer.
Children thermoglasses
They are made small capacity, 200 or 300 ml. Twist it equipped with a feeder cup, neprolivajka - blocker, tightly fixing the cover in position. In case of accidental fall of the liquid is splashed capacity. without risk to the safety of children's tableware kids can drink on the go, in transport. Clothing will be clean and dry.
Between the outer and inner vessel is vacuum layer which prevents heat loss.
Heat-resistant glass for cars
In a glass thermos for machines mounted heater. The device is powered by a battery, is connected via the cigarette lighter socket. Cooled down to 70 degrees warm up drink for 7-12 minutes depending on the capacity of dishes. Diameter car models glasses, thermos cup holders are selected by size. The roof is usually made extra hole to drink on the move, shifting the plate with your finger on the touch.
Apparatus simple matter to what materials made vessel, dependent time during which the coffee stays hot.
Important! Thermomug road are advised to check for leaks. Over time, dry seals.
Thermos-cup coffee
For trips outside the city, long walks comfortable insulated cups with a solid tube for hot drinks. Evacuated container 600 or 700 g of hot drink will retain within 8-10 hours. Flask thermos cup of hot coffee is better to choose glass. The safest metal tube, it will not break when dropped.
Thermos can be made of different materials and have different shapes.
By the way, thermoglasses with a light body, a white or light decor and more suitable for cold drinks. Dark better retain heat.
Most often they are made of stainless steel.
Additional features thermoglasses
Model additionally equipped with:
- handles, making them removable and permanent;
- -pot lids allowing drink to go;
- strainer, retaining the tea leaves, coffee particles, pieces of fruit or berries;
- rubber gasket on the bottom of the dishes becomes more stable;
- sippy cups, they are equally suitable for children and adults.
In thermos can be a pen, as well as so-called troughs for ease of use drink.
How to use a glass thermos
Before use, check the tightness of the cover is useful, while unpleasant surprises can be avoided. The container is filled:
- ready hot or cold drinks;
- brewed tea, coffee directly into the cup, thermos;
- warm liquid and add ice.
Tightly close the lid. Enjoy hot coffee or cold water during the day.
How to choose a quality model thermoglasses
When buying a cup-thermos for coffee and other beverages primarily determine the purpose of the vessel. Hiking, outdoor activities better to choose a metal bowl, convenient for city walks plastic. In ceramics convenient to store drinks at home, bring them to the office.
Plastic and ceramic mugs are more suitable for stationary use, for example, at work, in the office, in the country.
Better to give preference to brands with a good reputation, proven in the market. It is necessary to carefully examine the future purchase, check whether the plug is holding up well.
Popular manufacturers of heat-resistant glasses
Thermoglasses produced in our country and abroad.
- AMET products are made of stainless steel, plastic tube. Thermomug 450ml HYW0797 - optimal price-quality ratio.
- ARCTICA release avtostakany-flasks, insulated cups with handles and without a capacity of 200, 300, 400, 500 ml.
"Arctic" - a young Russian brand dynamically developing for about 10 years in a row.
On the products Series 801-K pen-hooks, it is convenient to cling to the bag can be used as an ordinary mug.
The assets of "Arctic" a broad range of products, all products are manufactured in accordance with modern standards, convenient and useful in everyday life.
Bekker various manufacturers cup-flasks with plastic housing, a metal flask.
The company produces a large range of vacuum flasks for a wide variety of applications.
BODUM - a combination of plastic and glass. Travel polymer completely, Bodum 10326-10 with a glass flask.
Products are of innovative design, high quality and known worldwide.
Thermos JMK - termoposuda cold drink with a wide neck, openings for loading ice.
The product range demonstrates the advanced designs and patented innovative technology, high-quality characteristics of alloys and materials.
Stanley produces a wide range of metal. Glass, plastic, ceramics in different price categories.
Quality is at a consistently high level, the company can be trusted.
Tiger constantly improve the design, offer gift models a variety of colors, shapes.
Manufacturer strictly monitors the quality of products and in the manufacturing process implements a lot of technology.
Glass thermos - a useful thing for all occasions. Compact and practical thermos. Particularly suitable heating capacity-pot lids, removable handles.
Insulated cups for coffee are very popular, they are made by thousands of companies around the world.