Slowly but surely, more and more space of our homes occupy cabinets coupe. They captivate with their beauty, spaciousness and functionality. Unlike their counterparts swing does not take up much space when opened. They can be placed in the pantry, and even on the balcony.
Sliding wardrobe with sliding mechanism
Over time, a pleasant experience evaporate at a skewed, almost falls out of doors. Accuracy and attention to the operation of the process will help to avoid these problems. Another very important the correct assembly.
Driving device aluminum sliding doors system nizhneopornoy
If there are any gaps in the assembly process, then they will show up in the course of operation. If adjustment is necessary cabinet compartment door, and you are not confident in their abilities - it is better to seek the help of professionals.
The circuit structure of the device compartment door system nizhneopornoy
Driving device aluminum door coupe upper suspension
Council. Save contact details brigade, which established furniture. If any problems occur will be able to contact them for elimination.
For a man who used to do all the housework yourself, adjust "coupe" is quite capable. In most cases, faults occur in the moving mechanism. It may also be necessary to replace the mirrors. In both cases you will need to remove the door. Better to do it together. Initially, lift up, stepping up to the lower rollers of the track. In the presence of the stops - open them. Depending on the type: otschelknut or rotate around its axis. Succumbed to the pull and guyed down.
To adjust the door of the compartment enclosure may need a set of screwdrivers and hex key
Content
- 1 Fixing leaky closed
- 2 Deskew doors
- 3 Adjusting the side door edge
- 4 fault correction, when the doors came down from the guide
- 5 Adjusting the door when a background noise
- 6 Video: How to adjust the cabinet door coupe to
Fixing leaky closed
If the compartment door ajar spontaneous and loosely adjacent to the wall of the cabinet, then the problem is the door stopper
If you notice that the cabinet door closes tightly and rolled back - required adjustment of the locking stopper.
- Put the door in the extreme position of abutment to the side.
- In the area of the lower guide mark to find the center nearest roller.
Adjustment of the locking mechanism is inserted into the recess of the lower profile
- Pushing the shutter shift stopper with a thin screwdriver. That its center coincides with the mark.
The correct position of the stopper to avoid self kickbacks doors and ensure a tight clamping in the closed state
- Glue it in the center of the guide.
To install the stopper is required to remove the door and dismantle the bottom of the guide as a stop must be put through its end
Deskew doors
If the door is closed wardrobe with a skew, the problem of adjusting screws
One of the most common types of repairs - skewed. One can observe the gap between the top or bottom of the door leaf and the side of the cabinet with the door closed.
Driving height adjustment doors
This happens because of the relief of the adjusting screw clamping responsible for strictly vertical positioning of cabinet side.
- The first thing to check the angles between the side wall of the upper and lower horizons, they must be straight. If there is a discrepancy, you need to tighten the screws connecting the side walls with the top and bottom. Align them at an angle of ninety degrees. Fix the metal corner.
To adjust the door on a vertical aluminum profile with end need lower rotating screw, generating bias adjustment of the door
- If the gap is still there, it means that the adjustment screw is loose. By means of instruction look for the bracket at the bottom of the side wall of the cabinet. If it is closed soft noise-isolating plug or tape it needs to be removed carefully. By adjusting the hexagon is necessary to achieve a parallel position with respect to the sidewall doors.
The optimum gap between the bottom flap and the guide - strictly 6 mm
- Avoid sagging flooring. If necessary - insert substrate.
Rotate the key clockwise or counter-clockwise adjustment is made doors, causing her to the side can be lowered or lifted
By rotating the adjustment bolt, the position of the door leaf
Adjusting the side door edge
If after closing the closet door is not pressed against the frame, the further you have to adjust the horizontal course of the door
If after deskew there is a gap, it is necessary to adjust the abutment. The bracket is also located in the underside of the bar or in the middle of it. Rotate it can bring to the side of the flap
To ease the shock of the closing and opening of the door panels of the sliding type, for each blade can stick rubberized pad
fault correction, when the doors came down from the guide
It happens that the wheel coming off the guide. Before you fix the problem you need to determine the cause.
- When improper cleaning guides in the region going to dust and dirt. The wheel runs into a pellet or a children's sock and jumped down from the guide. A lot of trouble, and wound can cause hair and skin. Until the failure mechanism. This fault is easier to prevent than to fix. When replacing the wheel has to remove the door from the rails and adjust after installation into place. It is better to regularly clean the rails and wheels.
If the lower roller when driving runs into the mud, the door goes up and goes towards the
- door rollers can leave the rails in case of breakage or absence of detents. Eliminate the problem of installing the stoppers in place.
Worn roller in comparison with the new
- By buckling and convergence guide doors can cause excessive filling and things cabinet. To eliminate accounts remove the door - to align it and replace.
Doors initially set in the upper guide, and then goes to the lower roller track of the lower guide
Adjusting the door when a background noise
Get rid of unpleasant noise will adjust the upper roller mechanism for this will need to remove the flap from the guides and tighten the fastener.
Squeak and rattle noise appearing at dryness moving mechanisms and fasteners loosening from vibration.
- Lubricate rollers machine grease.
- In the presence of defects replace the rollers.
Roller set with aluminum sliding doors nizhneopornoy system
- If there is clearance to remove the sash and tighten fasteners.
Sticker tape buffer to mitigate the impact of the blade sidewall at opening
- To check the symmetry of the rollers relative to the eaves of the web.
To eliminate the noise is necessary to adjust the roller mechanism, which ensures smooth movement of the sash
When installing high-quality cabinet doors coupé go smoothly, without twitching, pressed tightly against the face of the cabinet without any additional effort.
