We bought a new chest of drawers? Wonderful! It remained properly assemble it. If for some reason, use a professional collector of furniture can not service, one way out - assembly.
This process is not difficult, especially if you take advantage of the recommendations of experienced craftsmen.
Content
- 1 General instructions for assembling the dresser
- 2 What tools are needed to build the chest
- 3 How to assemble a dresser - Turn-based recommendations
- 4 VIDEO: Building the chest with his hands.
- 5 Original dressers in the interior - 50 photo-ideas:
General instructions for assembling the dresser
All kinds of furniture (wardrobes, dressers, walls, hallways, and many others) have a variety of sizes and shapes. In the rest of the interior items are similar, including in the assembly process. It is for this reason that the assembly rules for all types of furniture are universal.
- Unpacking.
All the component parts of furniture is unpacked and is removed from the box carefully. Careless or sudden movement could cause scratches and damage to the surface of the furniture.
Packaging with a chest of drawers. It weighs about 30 kg.
All parts are compactly folded.
- Preparation for assembly.
Details of the cabinet or chest is placed on the floor for a better view, and all furniture is placed in the box. This will accelerate the organization of the workplace and the assembly would not lose screws or other small parts.
All components are stacked correctly to avoid damage.
You can begin to assemble the chest.
- Instructions.
Do not neglect the instructions supplied with the furniture components. It will greatly facilitate the task and protect against possible errors.
Instructions available in the bundle, it is recommended to carry out the assembly, referring to her.
What tools are needed to build the chest
To achieve fast and good result to build the chest in the instruction offered to stock up on tools. In this list, there is no specific professional tools, all there in every home.
Among the necessary tools:
- Wurupovert - and you can use a screwdriver, but the screwdriver will significantly reduce the time spent on this phase of the work;
- Molotok - this tool is required for mounting the rear wall of the chest;
- Ploskogubtsy;
- Ruletka;
- TOarandash.
Tools required for assembly.
These details will be enough just to pick up furniture.
In some cases, it may be useful drill with a set of drill bits. This rarely happens, as most furniture manufacturers produce furniture sets with ready-made cut-outs for fasteners.
How to assemble a dresser - Turn-based recommendations
Each Factory product is provided detailed instructions from the manufacturer, but all types of dresser assembly diagram of the same.
- Frame.
Manufacturing of frame products - the first stage of the work. During it fastened side walls, the upper cover and stiffeners located below the carcass. To perform this work will require a screwdriver and suitable for attachment size.
Assembling the chest cage.
Fastening sidewalls.
The frame is almost ready.
At this stage of the assembly on the dresser is better not to sit down, but will soon be possible.
The rear wall of the 2 halves.
Attachment to the chassis rear wall of the chest.
- Assembly boxes.
Many people wonder about how to build a chest of drawers with drawers. circuit assembly will begin (as in all other cases) with the carcass. Upon completion of this phase of transition to work with boxes. How to assemble the box for the chest? Fastening is carried out in the following order: first is fixed between a lateral, front and rear wall, and only then go to the installation floor. Often, the kit is a separate strip on the sliding case, which acts as the decorative element. In such cases, the overlay set fittings and fixed pad on ready-made wardrobe.
Assembly boxes.
Fixing evrostyazhkami.
The bottom drawer is covered with plastic with a pattern beneath the fabric.
On each side of the bottom of chipboard fastened guides.
Handles for drawers.
- Installation guide.
After preparing the framework and all the boxes for sure many will think: how to build a chest of drawers with drawers to a finished state? For this to be another stage of work - installation guide. One part of the system are mounted on the bottom of the box (which it will slide and ensure smooth movement). The second part of the system should be fixed on the inner sidewall of the frame. The most important here - to choose the mounting location. To do this, armed with a tape measure and a pencil. Identical stretches of note on the front and the rear of the frame on both sides (to verify the correctness of the marks, you can use level). On to make a mark with the help of the screwdriver attached guide.
On the side walls with guide rollers have been screwed.
Roller guide for sliding drawer.
The screws, which are then not interfere with drawers.
Screws "buried" almost completely and securely fastened.
Ready fixed guides on the drawer.
Ready dresser looks very attractive and stylish.
Sometimes, in addition to the standard parts, dressers and have extra parts (mirror, changing the surface). In this case, there is another problem: how to build a chest of drawers changing drawers? Instructions in this case does not change, but is complemented by another 1-2 points. Mounting additional parts has been going on a fully finished product. This can help screwdriver - holes made by the manufacturer's marks.
VIDEO: Building the chest with his hands.
Original dressers in the interior - 50 photo-ideas:
