Why washing machine does not spin: causes, ways to solve problems

Washing machine - is the subject of home appliances, without which farming process is not. It is absolutely in every house and in every apartment. And the hosts hard to remember what the daily hand washing. Especially if you need to wash bedding or a huge number of children's clothes that the baby has time to spoil in a matter of minutes. In short, the washing machine easier life several times.

But as with any technology, it can break. The most common problem faced by the master, - the washing machine does not spin the laundry. That is, the unit takes water, washes, but does not spin.

Causes of the spin function

It may seem that the absence of the spin is not a problem. In fact there are plenty of reasonsWhy the washing machine has stopped working. For example:

• Improperly exposed wash program, ie disabled or squeezing function included gentle wash cycle.
• The problem with drainage. Perhaps blockage or malfunction of the device program, because of which the drain is not working.
• motor brushes had deteriorated.
• Electronics Module.
• Problems with the water level sensor.
• I stopped working PETN.
• Overloading the drum, that is loaded with a lot of things.
• Broken tachometer.
• The engine stopped working.

With every possible problem you need to work separately. Since it may be the first signal that the device will soon be worthless.

Solving simple problems

Some reasons for washing machine or spin or does it badly, quite banal. Eliminate them can be a matter of minutes. As a rule, because of the greater number of them happening breakdowns.

gentle wash cycle

Modern washing machines have a large number of functions. For example, a gentle wash cycle. The developers tried to consumers and have created such a regime to the finer things are not damaged in the wash. Spin may be turned off independently by pressing a button.

Therefore it is necessary to examine carefully the machine interface. Perhaps that is selected for washing delicates or spin off. In this case We need to change the program and try to wash it again. If this method does not work, then you need to understand further.

linen overload

This problem is quite common. Due to the fact that the drum is overloaded with laundry, washing machine is not working. When the machine starts pressing, it is trying to untwist the drum up to speed. But because of the severity of the wet laundry to do it can not. Therefore, the laundry remains depressed.

To avoid such problems, you need to carefully read the manufacturer's instructions. As a rule, it will specify the allowable amount of things that can withstand machine. Experts advise to avoid overload, as this reduces the lifetime of the device.

To resolve this issue will need to pull out half the things. That is dostiryvat have piecemeal. You can also try to distribute items evenly on the drum. But this method may not work, and even more harm to the device.

The solution of complex problems

The first thing to do before the repair - disconnect the washing machine from the power supply, ie pull out the plug. It is also desirable to remove or turn off all electrical appliances that stand nearby. If they hit the water, it may be a short circuit.

Fault drain pump

Plums - this is the first reason that the washing machine does not spin the laundry. If there problem with a drainThen define it very simply. Just open the drum and to look into it. If there is water in it, so diagnosis is completed and determined the cause of failure. It so happens that a problem with drainage can be seen immediately when the machine does not drain, and the tank is full of water. In this case, do not try to open the drum full of water, it will leave itself in the process of repair.

To solve this problem, the first thing to do is to check whether the drain pipe or clogged. The door leading to a drain is usually located in the lower left corner. It can be seen immediately. Before opening the box, you need to lift the machine by about 15 cm and secure. In any case, make a number of sex rags and a bucket sure. All this is necessary to ensure that when you open the drain stagnant water does not spread on the floor. Further, by opening the door, you need to get the drain filter and clean it. Then put it back, connect the machine to the mains and try to wash it again.

If everything turned out - so the problem is found. But if it still does not spin the washing machine, it is necessary to continue the diagnosis.

Deteriorated engine brushes

Symptomatic brush wear is to pause, which occurs when the washing machine in the spin cycle proceeds. In order to solve the problem, you need to disassemble the housing. When parsing a person needs to be very careful and remember the location of parts and wires.

Know that the brush has worn off, it is possible along its length. When the brush is removed, you need to measure it. The normal length - about 15 cm. In worn brush not more than 5 cm. If the item is really worn out, it needs to be changed urgently.

Broke water level sensor

The water level sensor system takes a signal that the merged water. If before you go to the regime pressed, washing machine freezes briefly, perhaps the problem with this part. And because it does not work spin in the washing machine.

The fact is that when the machine dostirala, it signals the start of water discharge and that the water is completely merged. But if the system does not get it, it can not start pressing and finishing laundry. The trouble is that water level sensors can not be mended. They can only be replaced. It is better to call the master, as the replacement of parts - a very delicate process that requires experience in the work.

Damage to brand and washing machine

Each of the firms producing washing machines, has its pluses and minuses. And each of them has its own weaknesses, which in case of overload can break. The most popular and expensive models are LG and Indesit. Problems with them should be considered in the first place.

LG washing machine repair

It should initially say that LG washing machine repair is better to entrust the master. But if it was decided to repair the machine yourself, you need to define the problem perform the following steps in order.

1. It is necessary to remove the top and rear access panel. To remove the cover need to unscrew the screws a little bit and move it higher. To remove the back panel is necessary to slightly bend it so that it came out of the grooves.
2. Can determine serviceability of the engine with a multimeter, after disconnecting the 3-Letter connector. If the device parameters are different from the norm (7.5-7.8), the problem in the engine.
3. Check the control unit can be by placing it in diagnostic mode. To do this, hold down the speed button, the level of contamination and the inclusion of both.
4. start button is pressed twice in the whole process. Namely: to lock the door at the very beginning and to scroll to the end of the spin.
5. If after pressing the spin process has not started, then you need to disconnect the unit from the rear of the machine.
6. The control module also checks multimeter. The normal rate - is 140-150 volts. If other indicators or non-existent, then the item is found broken.

Problems with the machine Indesit

The weak points of this brand are: the electronic module, tachosensor and spin off button. But in most cases, violations occur when an incorrect observance of the operating instructions. For example, the drum overload mode is on gentle wash or spin off.

It should be noted that problems with the spin off button, you can correct yourself. A repair tachosensor module and are best left to a professional. Otherwise, you can finally break the washing machine.

Weaknesses other models

Washer bad or spin? The reasons may be different. Some weaknesses. About break certain parts show certain signals. For example:

• Broken water level sensor - the machine starts to load the spin cycle, but the process has not started.
• Problems tachosensor - if its fastening wear or become loose, the drum will not spin.
• I broke programmer. The reason for this can be surges, manufacturing defects or to be flowed onto the item. Symptom: The spin cycle is not loaded on a regular basis, as it depends on the mains voltage level. If it is low, then the automatic machine does not spin.
• The brand Zanussi, Bosch, Candy and Ardo often breaks down the drain. He becomes the cause of the lack of spin or bad clothes pressed. Much less likely to break the drive belts, which cause the drum to rotate, and water heater.

The washing machine etc.ovolno many parts that are prone to breakage. And if it is not banal failure to comply with instructions, repairs are best left to the master. Independent attempts to repair the car can result in the ultimate failure. And there will be only one way out - is to buy a new machine.