Washer is an indispensable tool in everyday life. It erases a lot of things and saves your free time, allowing more rest. But over time, you may experience some difficulties in the form of various breakdowns and malfunctions.
For example, there is a feature that allows for many new washing machines lock the door. This prevents opening of the door during the washing of laundry. But many owners of cars start immediately panic if you do not open the door of the washing machine, not having comprehended the situation. Indeed, sometimes at hand is not the master room, and the machine is not to fix itself.
Therefore, technology is necessary to sort the owners what to do if you do not open the washing machine door because of breakage and how to open it independently.
Content
- The causes of the problem
- Analysis of possible failures
- Nothing's broken
- Problems with electricity supply
- Broken parts or mechanisms
- The water in the drum
- accidental discharge method
- Samsung Washing Machine
- A LG model
The causes of the problem
Mechanical locking of the door during the washing machine is needed in order to protect you from casual troubles in the wash. Also, it is possible that when washing under the influence of vibration of the door can be opened by itself. If you need to open the door and report things to the laundry, you should activate the spin cycle. After the water merge, open the sunroof, to report things and start the machine again.
- At a time when the work is finished the machine and the door does not open, you just need to wait for some time. it usually opens in 5-10 minutes after washing. The new machines, this function lies producers.
- If the machine is not opened after 10 minutes, it can be caused by sharp jumps voltage, turning off the light or stopping delivery of water in the washing apparatus. At the time of tripping to open the door of the machine alone will not work, because in the dark will be hard enough to drain the water.
- In the wash mode accidentally enabled mode "protection of children". This can happen when you press the two buttons on the specific washing machine panel. To disable this mode, press the STOP button and select a new setting on the control panel, this usually requires following the instructions for use of the washing machine. Turn off this feature is also defined by two buttons.
- Breakage or wear any parts washing equipment mechanism.
- downcomer clogging inside the washing machine. Because of this, the machine is still a certain amount of liquid, and the water level sensor does not unlock the door.
Analysis of possible failures
When you need to open the washing machine, if it is locked, and to unlock the washing machine without having to call the master, you must first find out, because of what does not open the door.
Nothing's broken
Washing machine works without problems, can not open the door only in some cases. For example, when a power outage, or if not disabled herself locking system. In the second case, it is intended by the manufacturer specifically to the owner was unable to open the machine while in water drum. Before you get the clothes out of the car, make sure the wash is over. After about machine operation end signal to wait a while, and to open the door. If not, disconnect the machine from the network and turn on again, or restart the wash cycle.
Problems with electricity supply
It is difficult to determine when exactly will happen with the problem of power outages in the house. When there is a sharp cut-off of electricity, or a sudden accident, the machine working area of the port door lock. If knocked out traffic jams, no need to immediately try to open the door of the machine independently. Experts say that one should wait, because most likely the electricity is off for a while. If you are sure that the trip is delayed, you should try to open the door by his own efforts.
Broken parts or mechanisms
The most common phenomenon in everyday life is damage to any parts inside the machine. To open the washing machine, if the handle is broken, it is recommended to remove from loops and try to make out. Breakage is not always the result of a strong physical impact of the owner to handle. Sometimes this is due to simple wear and tear parts. If you need to open the appliance yourself, do not immediately grasp the handle of the machine and pull hard, because it may break offAnd the result of this will not be any. Therefore, there are certain ways to help open the door while the machine by his own efforts.
The first thing to make sure - is to turn off the power. To manually unlock a car door, you need to understand the causes of the problem. Further actions will depend on the situation and the extent of the problem.
The water in the drum
You can not open the washing machine during the wash cycle. Never open the door of the washing machine if the drum full of water. After emptying the machine access door lock comes off itself, and you can get clothes from the drum without any problems. For draining water out of the drum washing machine must use a special hose, a drain pipe or so called pipe.
- Special tube, which is equipped each machine is a filter wall. To use it, you need to remove the partition from the filter and get a thin tube. For the full extraction of water from the drum by the receiver need to put the container in which stechot water. The tube is a plug, which must be removed. After these manipulations, the water will start to flow, and the drum will remain empty. This method is quite time-consuming, as the water will be drained for a long time for such a small tube.
- The easiest way - is to drain the water using the drain hose. It is located generally on the rear side of the washing machine, but can be located and bottom. The hose should be disconnected from the machine and drop into the water tank. Should be lowered to a level that is lower than the water in the washing tub, or simply do not water will flow. In this embodiment does not completely drain out, therefore it is necessary to consider other ways.
- The third and most difficult way - is fitting. In severe cases the machine can not drain water from the tank due to the clogging of the nozzle. To solve this problem, you need to get to the pipe located at the bottom of the machine and clean it from junk. After cleaning the water is drained, and all the items are being returned to their seats.
accidental discharge method
Every washing machine is provided cable for emergency door opening. Usually this is at the bottom cable cars next to the filter and has a bright red color. Carefully pull enough for him, and the door of the washing machine to be unlocked. If a cable is not available, it is necessary to dismantle the top cover of the machine, thus disabling it from the network. Then you need to tilt the machine slightly backwards to the drum machine moved away from the door and gave a pass to the trigger interlocking concrete units. The unit needs to find and open the tab.
This method is more difficult, because we can not do without the application of force. Most often, the sequence of actions depending on the brand and the components of the machine.
Samsung Washing Machine
If a machine of this brand does not open a few minutes after the end of the work, let it stand for half an hour disconnected from the mains. During this time, the restart the wash mode, and on the door lock opens itself. If you see that wash over, but in a tank standing water, you need to turn on the spin cycle. If water does not start to merge, it is necessary to try to merge their efforts, as the door lock can water itself. Next you need to call the expert, since there was a breakdown of water pumping system.
A LG model
Be sure to remember that when the door is closed is prohibited with great force to pull the handleAs this will damage the lock. In such a situation after an emergency landing and the opening of the machine will have to replace or repair damaged parts. In this case, you should go to a service center, or if you have certain skills to repair the equipment with his own hands.
When damage to the washer hatch do not need to panic, simply read carefully the instructions supplied with the machine and fix the equipment, following its procedure. If you're not confident in your skills, do not waste their strength and ask for help to the master.
retain