During the construction of different objects at a particular stage raises the question of what kind of material used for insulation, what material to use, not to get the effect of the sauna or steam room? Are there any materials that can help to combat this problem?
Izospan - is the undisputed leader among the materials for protection from moisture and steam. The material is so named in honor of the manufacturer. There are several types IZOSPAN. Each type meets certain requirements and is used for the isolation of a different nature.
Types of resin film
There are the following types:
- Izospan "A" series is suitable for outdoor use. Isolates roofs, walls, facades against wind and moisture but does not prevent the inner pair of outwardly eroding. This is made possible thanks to the tissue structure, which at the upper side - is smooth and is covered with the inner pile.
- Izospan "B" is used for interior decoration. Permeability of this type is lower than that of the precursor, since the method of overlaying material has other technology. They help to keep the properties of building materials for many years, as they prevent the formation of steam and settling on the internal structure. It is this version is laid on the ceiling construction and a reliable defender of vaporization.
- Izospan "C" is used for interior decoration, but it has also the further effect of thermal insulation. Used mainly for thermal insulation of the floor. It has the effect of heat reflection and energy conservation.
- "D" type Izospan. This connecting strip. When installing it is important to have all the material production companies. Tapes are necessary when fixing the base web for better sealing.
Polymer films have a number of common types of the most important qualities, it has become possible thanks to the development of new technologies in the field of construction and reconstruction.
material properties
Type polymer membranes have earned positive reviews for premises security properties:
- The ability to conduct heat.
- High density due to the membrane structure.
- Water resistant.
- Strength, resilience, breakthroughs.
- The ability to protect against UV rays.
- Modern technologies allow to produce building materials with a high degree of environmental safety - this applies to all types of IZOSPAN.
prices
the plastic film The prices depend on the species to which it belongs, and the manufacturer, which is its market. Izospan sold in rolls of waterproof side in one of the roll area is 70 sq.m.
The price of one roll of the types A and B, which are suitable for use in the ceiling, can range from 1,000 to 2,000 rubles.
For sale is a self-adhesive tape Izospan, which is used in various capacities. It costs about 500 rubles. Unit, it is about 30 m.
Often unscrupulous manufacturers want to give their products IZOSPAN, so when buying should ask about a certificate of quality and conformity of production standards. To calculate the amount of product on the sites of special construction companies or stores, intermediaries have special online calculators calculation.
By the way, a good buy Lining you can on the company's website RealWood.ru. Good quality and reasonable prices.
How to lay IZOSPAN ceiling
Many questions arise about how to properly lay insulation film.
Building a house with his own hands - this is a difficult task, it is necessary to take into account a lot of nuances arise, so that later arose the need to start over. Wooden houses are particularly susceptible to problems of condensation on the ceiling and the subsequent rotting material. In this case, IZOSPAN will reliably protect the house from the mold. What is important is to lay the material correctly. Rules competent vapor and damp-proofing is important to observe the construction of houses and other materials.
There are several rules that deal with the use of ceiling IZOSPAN instructions. The film itself can not be load-bearing structure, so it is important to understand how to be arranged ceiling.
Required tools
Tools and materials in order to lay the ceiling IZOSPAN:
- staple gun, and staples (in order to effectively fix the material on the ceiling);
- Racks (to attach them after IZOSPAN tension);
- nails with wide hats, hammer (instead of the staple gun or together with them to secure the material in difficult areas);
- self-adhesive tape (for gluing and pasting sections of all suspicious holes);
- scissors, a knife (to cut the film quickly and efficiently).
To understand how to lay IZOSPAN, you need to remember that the ceiling material is suitable line B. He spreads between the two main load-bearing structures, that is, between the rough ceiling and interior decoration.
Rough ceiling is a ceiling that was built during the construction.
side material
Now you need to figure out which side IZOSPAN located on the ceiling. The smooth side should be adjacent to the unfinished ceiling and the membrane is placed fuzzy side down. Mounting system is to stack the sheets on each other or overlapped with a margin. The width of these areas should be at least 15-20 cm.
On the ceiling of the blister material may be fastened with staple gun or using shirokoshlyapochnyh nails. To IZOSPAN portions which are against each other, have firmly established, the adhesive tape often used IZOSPAN. It is convenient to use and is specifically designed for such work.
The final stage of attachment to the unfinished ceiling - a superimposition of wooden strips or galvanized profiles. Further, they can be closed with plasterboard, paneling, paneling or plywood. They, in turn, are attached to the frame with spaces for ventilation 5 cm.
In order not to miscalculate the size and does not create a problem of lack of material, it is best to use it with a margin so that the portion of the film protruding from under extreme rails near walls. The film can be trimmed, and the excess plaster hide, thus providing greater protection.
An important point - is the presence of holes or protrusions in the ceiling. We are talking about the openings for chimneys and the like.
In these cases it is necessary to cut specific areas of the cloth, and then fix on the perimeter of the hole with adhesive tape or tapes. In this case, it is important to not leave holes, which will drive all the work to zero.
Before you begin the installation IZOSPAN, you need to check whether the pieces of wood processed by special means. Processing includes antiseptic activities to wooden elements are not subjected to contamination or premature rotting. Before work you should carefully examine the ceiling, remove all dirt, seal the cracks, zashpatlevat them if necessary.
In the presence of ladders, skills, and tools can cope with the task of flooring material on their own, but it is best to have an assistant who can help in pulling the right or fastening material.
It's best to roll to roll in the direction from left to right and keep it in line with the fact that the smooth side was on top. First side is fastened by a stapler construction which ends presence roll, and then properly tensioned free side, then it is possible to proceed to the consolidation reyami.
In addition to the ceilings material is suitable for thermal insulation of walls and floors, but in these cases the stacking technology is slightly different.
Questions that arise during installation
Many questions arise for those who do not have the opportunity to build a house on their own and decide how to insulate their premises, what material to choose and what to do with sex?
When there is a question about the vapor barrier already existing premises to their original data, you need to consider is the condition of the ceiling. There are cases when the owners IZOSPAN glued on plaster ceiling and waiting for the condensate on the balcony or in another room does not appear, due to the magical properties of the membrane. They advance err IZOSPAN not fit on a structure which is already plastered or insulated with mineral wool.
this type of insulation requires paroizolyatora flooring and plaster is already a kind of interior decoration. Flooring lead to consequences, which then have to be eliminated.
For thermal insulation of the roof from the outside requires a different kind of material, type A. It will be laid on other principles and reasons. For insulation from the inside of the roof decking technology it remains the same.
If the installation of the film occurred rush, you can seal it with construction adhesive tape. It should be done very carefully in order to not be broken airtight layer afterwards.
In addition to the vapor barrier ceilings such work should be carried out in relation to the floor or walls, but it can be used completely different types of membrane film and its technology Coanda. The main thing is to understand what kind of film is necessary for works of construction or maintenance work, not to get something that would be unnecessary.
On the use of IZOSPAN Ceiling detail in the written instructions for use. If there are doubts about the choice of material, it is best to consult with experts. IZOSPAN installation on the ceiling easily do yourself, if pre-study the necessary information.
