Modern pipes used for wiring of the heating system, heat lines are different from the issue of the last century, the quality of performance and ease of daily care. But they are pieces of equipment, factory setting concise and do not carry any load aesthetic. Therefore, the desire of tenants to clean away or somehow artistically internal heating pipe is understandable. Typically, the horizontal sections of the heating pipe in the apartment more than vertical, and they are located on the perimeter of the room in the lower part - the traditional location of the zone baseboards. Therefore, the most natural-out such finishing is heat lines using-plinth box for heating pipes.
Functional features skirting heating systems for pipes
There are many embodiments of pipelines mounted trim, baseboard heating pipes also monotonous for decoration, but this material, depending on the location, there are constructive features. If the heating pipe passes through the unheated areas, the pipes to reduce heat loss must be equipped with thermal insulation, decorative casing and the body must be continuous - without openings and slots. The extent of his aesthetics depends on the status of the premises and wishes of tenants.
If the wiring is formed in a residential premises and in need of heating, it does not washed her warm - the heat transfer surface of the pipes will occur in the room air, and that - no heat loss. Therefore, decorative covers baseboard designs for heated space may be through holes or slots feature implementation that is desirable for even more uniform heating of the room air and less thermal effect on the material plinth. However, it should be borne in mind that to keep clean such surfaces harder than smooth.
Important! We are talking about the design of the heating system of the pipeline under the plinth, not baseboard heaters.
Requirements for finishing the heating pipe under the plinth
Dressing materials used for the design elements of heating systems, have the following characteristics:
- low flammability;
- sufficient thermal stability - the ability to maintain the geometry and aesthetics when subjected to heat;
- low coefficient of thermal expansion;
- hydrophobicity - resistance to moisture (for daily care and emergency leakages);
- resistance to chemicals (household chemicals);
- security - the absence of harmful emissions and odors due to temperature;
- ease of installation and daily care;
- resistance to mechanical stress - if rearrangements of furniture, etc .;
- aesthetics.
All of the above applies to the plinth to hide the heating pipes.
Types of covers for execution baseboard heating pipes
The main feature classification baseboards under heating pipes - is producing material that can be divided into three main groups:
- metal;
- wood;
- plastic.
Each group includes a plurality of variants differing in size, profile, color, surface texture, etc.
In addition to those items can be added independent manufacturing ducts group that are performed on the basis of frame of cd-profile, mounted to the wall, followed by plating and finished plasterboard plastic, ceramic tiles or mosaics.
Important! This method of tube finishing is convenient because it allows you to draw line in accordance with any interior space, if the sale does not find a suitable ready-made slipcovers.
In the industrial production of skirting boards have various options for the design and configuration:
- covers for brackets without tubes (screens) - attached to the wall-mounted and fastened on top of the pipeline;
- shell complete with holders for pipe - mounted on a fixed bracket-holders with the trumpets.
Selection of decorative skirting boards should be made with reference to the specific operating conditions, including a plurality of factors (the place of installation, the diameter and number of pipes in the runner, the presence of the thermal insulation, etc.) and the interior premises.
Consider options like hide heating pipesAnd several types of decorative skirting boards that are used for finishing the pipe heating systems.
Metal screens baseboard performance
Products are covers oval or rectangular section of aluminum or stainless steel which are abutted against each other are attached to the wall with screws mounted on top of the pipeline. The surface of the plinth perforated, which reduces the weight of the product, makes the room warm up more evenly and allows for visual inspection of pipeline leaks. The shell is durable, mechanical failure is restored straightening, easy to assemble and allows painting.
Such moldings can be cut into pieces of any length, including user-friendly layout of the nodes of valves in case you need replacement or repair.
Set guards at any height piping, can be placed directly along the floor interface with the walls.
Plastic skirting-casings
Skirting boards made of plastic pipes for heating - a budget option for solving the issue. Characteristics of plastic used for these purposes, mostly low. On products are scratches from mechanical damage, some species after years of operation are deviations from the original geometry. But a wide material range of prices allows inexpensively change the baseboards every year or two, at the same time bringing the interior premises new strokes - variations of artistic execution of these many accessories (fine wood, a natural stone etc.).
Typically, the installation of such skirting boards begins with their bases installation - the rear part, which is fastened to the wall by screws preformed marking. To set the base mount brackets, pipe holders, into which the heat line. Above the heating circuit is applied the front of the plinth and smooth snap-mounted into the mounting grooves.
Wooden baseboard covers
Wood products are not performed in the form of universal models, as the cost of natural wood, suitable for a heat-resistant shell is high. Therefore, such a finish bought in joinery or furniture shops for individual sizes and designs.
Baseboard box of wood with proper treatment and proper care, beautiful and durable. The color of the wood to a protective coating of lacquer can be changed by applying stain - toner composition, producing different colors and saturation.
Important! After finishing the machining of wood, but stain and varnish coating (paint), treated with baseboards insecticide against the beetle-grinder, for example, "Antizhuk".
Skirting boards made of wood mounted on brackets previously fixed to the wall. The inner surface of articles passes all required processing before mounting ( "Antizhuk", two nitro lacquer layer), and the outer fitting is made only after the final finishing circuit baseboard.
An intermediate position between the wood and plastic moldings occupy under heating pipe made of MDF. Decorative shells made of MDF are affordable, durable, fire-resistant composition processed, handled well and mimic the natural wood. But at the same MDF has a low humidity, so sections of the material must be processed by two or three coats of nitro lacquer in case of emergency leaks in the heating system.
conclusion
The question is how to hide the heating pipe, it is better to solve the heating system installation, as mounted circuit imposes limitations in the application of structures Decorative plinth - mounted on the wall brackets at the rear of the trim existing pipeline is difficult and dangerous, it can damage the seals against in threaded connections. But the pipe even put into operation the heating system can effectively hide the decorative screens baseboard performance, sometimes - our own production, if the design decoration to use services of a designer.
The main essence of the article
- Contents heating pipes - to improve the aesthetics of the room. Execution is not technically difficult, and perhaps their own.
- Selecting a heating circuit finishing must be carried out with reference to the operating conditions.
- By purchasing Baseboard shell, you need to have an idea of producing its forms.
- In the presence of high-grade indoor decoration in front design of the pipeline, it is desirable to consult a designer.
