100 options for how to make a lamp with his hands: photo

click fraud protection

To create a lighting fixture used in virtually everything you can find at hand: wooden sticks, pieces of skirting, container, cut down a tree, metal rods and tubes, glass products, tissue. Homemade lighting make futuristic, classic, glamorous, minimalist. For each type come up with some turn-based workshops. Designer to decorate the room with unusual lights. This product can be slotted, a plurality of separate pieces in the form of a large ball or cube. The same fixtures and make their own hands, of any material. They are doing it not only masters who sell their products, but also to ordinary owners of apartments and houses. Homemade chandeliers can be similar to shoplifting or performed in an unusual way: from graters, cans, etc... The shape depends on the characteristics of the material and fantasy artist.

Content

  • That can be used as materials
  • Options to create fixtures of wood
    • Master Class: How to make a candlestick of cut a tree
    • Geometric Light of wooden slats
    • Lampshade made of veneer
  • Lamps made of textiles and yarn
    • Master class: a spherical lamp made of threads
    • Lampshade made of fabric with their hands
  • Plastic chandeliers and lamps
    • Workshop: manufacture of plastic spoons bowl
    • Chandelier made of plastic bottles in the form of leaves
    • Lamps from laserdiscs
  • Ways to create lamps made of paper
    • Rice or parchment paper
    • Chandelier origami paper bags
    • Bowl made of corrugated paper
    • Chandelier Butterfly
    • Spherical paper lamps
  • Lamps made of metal pipes and tubes in the loft
    • Chandelier of brass tubes
    • Headlamps of plumbing pipes
  • The use of glass to create fixtures
    • Lighting of wine bottles and wood
    • Using old cans to create fixtures
  • Chandelier / lamp in style Shabby-chic
  • conclusion

That can be used as materials

need:

  • fat cream;
  • PVA glue;
  • Cotton Buckle;
  • dye;
  • Balloon.

There are some interesting options. From conventional thread get beautiful glowing ball. First, you need to inflate the balloon and rub it with cream. It is placed in a container with water and dilute PVA therein. Then he wrapped thread. The design is left to dry for 24 hours - will be only to spread the product on the ceiling. The second way is to use tubes. The sheets are rolled diagonally protruding tips glued. We need two hundred tubes: they are glued together in a circular or triangular shape. A further embodiment - lampshade wire: it swirled into a spiral or conical shape. Create light and can be made of plastic bottles: they cut off the bottom and neck. Need wire, acrylic paint, sealant and a marker. There are many other techniques to create a lamp with his hands.

Fixtures of the cups

Options to create fixtures of wood

Production of the lamp with your hands - it is primarily an art rather than savings. Despite the fact that a tree - a simple and inexpensive material, products made of it can compete with the others in terms of performance and aesthetic quality. Their production process is not the easiest. It needs to carry out complex calculations to work with a lot of tools to clean up a lot of trash. Lighting made of Spili, branches, veneer, wooden slats, wooden boxes, frames, wheels, billets, bars, etc. Lamp made of wood - perfect for an interior decorated with antique. It can make the barrel of the piece or of the treated materials, e.g., in the form of complex the geometrical design of the sticks, ring, cylinder or square, created from four or eight bars.

wood lamp

Master Class: How to make a candlestick of cut a tree

Need tree trunk, grinder, hacksaw, LED ribbon (2 m), brush, paint for wood, adhesives, matt plastic pipe. First trunk is cut into slices of equal thickness - about 2 cm. Then, in the middle of one of SPIL is a template. He and all the other sections are drilled along a line. Measurements should be done carefully, because the whole process is poorly marked fragments will have to start anew. After that, they must be sanded. The next step - strengthening with glue and laying in the pads to dry. After that log-varnished. In parallel, you can prepare a matte tube - rod design. Its surface is processed to maximize the effect of haze. Spila put on the phone and then have to do one more step. The last thing the tape is mounted. It needs to be folded into the hands and in this way put into the tube.

take the logchop saw cutready circlesAt the center of all kruglyashey mark the spot for drillingDrilling is planned to placeAt 8 kruglyasha drill through holeIn the thickest kruglyasha 2 (this will be the top and bottom) only drilled recess approximately half the thicknessgrinding kruglyasheyFinalization of the manual typewriterBefore polishingafter polishingApply carpenter's glueMaking the spacersleft to drytake the nailApply the varnishleft to dryTake tube and paint it in a matteDon kruglyashi on the tube and insert the LED StripFloor lamp spilite prepared from

Geometric Light of wooden slats

The list of necessary materials and tools include: self-tapping screws, drill, chipboard, brush, acrylic lacquer, electric block, 4 rounds and 7 two-meter rails. Chipboard need to cut the workpiece, and their edges okleit edge. Reiki is collected in a single structure in the form of a cross with a diamond shape in the middle. Of 5-mm veneer is cut basis. In places where the slats create intersection, set pieces of bamboo sticks or dowels. The basis must be drilled 8 holes 4 intended to ceiling, and the same for the main body of the lamp. Of tin need to bend the 4 corners with bevelled edges. They are mounted with screws so that the exposed parts of the angles were directed inside the lampshade. The entire wooden frame is covered with varnish twice, with a break for drying. At the end of the cruciform structure is screwed SCREW.

We do markup railssawing the workpieceObtain 63 strips 8 cmtreat nazhdachkoyglue the slatsreserve ends 10 cmThe upper part 35 cmFramework should be the sameApply markup boltdrill holesApply the varnishinsert the boltsWe fix nutsfasten cornerscut glassDraw holes layoutboltedCut and sticking Stickersfasten cartridgessumming wireGeometric Light of wooden slats

Lampshade made of veneer

It can be made of twelve strips. To the inner part is taken smaller - 60 cm for the external - 70 cm. Strips made from a sheet they are cut along the line fibers and steel knife. On a large sheet of paper is necessary to draw a circle with a diameter of 350 mm. It is divided into sectors of 30 °. On the left and right side of the line separating the sector, on the perimeter of the circle drawn parallel lines to determine the correct position of veneer strips. Then prepares the disc with a small hole to put the band. They are glued in a clockwise direction in the form of snowflakes, first three short, three long afterwards. After drying of the adhesive in the construction of the strips is required to make an opening width of about 1 cm. Wire is pushed through it, and is fastened to the drive sleeve. Hanging ends of the strips are fixed flange and bolts.

See also:How to organize the lighting design

Lampshade made of veneer

Lamps made of textiles and yarn

To create a lampshade you can use old clothes, jeans, socks, dresses and damaged others. Products decorated with bows, pockets, thread with beads. In virtually all cases, the fabric must be worn on any framework. It can also be done by hand. As the material is better to choose metal, sometimes wood. The basis for a homemade fabric chandeliers can act factory lamps, both new and old. The fabric is usually an old lampshade can be removed and instead consolidate a modern, stylish designs. To create and design of chandeliers improvised use threads of varying thickness. They wrapped jar and various scaffolds connect the luminaire and suspended structure. It is interesting to look lampshades made of hardened thread. In addition they also use twine or rope. They successfully combined with different fabrics and paper.

Lamp made of threads

Master class: a spherical lamp made of threads

To create this product needs:

  1. The base of the table lamp.
  2. Glue.
  3. Thick threads (up to 4 coils).
  4. Air balloons.
Thread, bead and gluethread soaked in gluePaste bead threadAfter drying, the balloon burst and take outCooking Light bulb

First inflate balloons. Preferably several, because they can burst. Their form has to be perfectly round. Each of them felt pen drawn desyatisantimetrovyh circle. Through the opening of a size to be inserted with the bulb holder. The ball is placed on the oilcloth. Preparing an adhesive solution. Arms need to wear rubber gloves to dip into his skin. When they are impregnated with a solution to get them; then removed the glue clots. The end of the thread is tied to a node of the inflatable ball. Then she wrapped around the entire world, it must be done uniformly over the entire surface, but chaotic. It is advisable to use multiple threads of different colors. Then the ball is suspended until the construction is dry. Then it burst and cut assembly. The ball is extracted through the large hole in which will then need to insert a cartridge with a bulb.

Spherical lamp made of threads

Lampshade made of fabric with their hands

We need construction paper, glue, fabric, thread under the color of the fabric, pins, a ruler, a pencil, an iron. You need to make a template for calculating the appropriate amount of tissue. If the frame for the lampshade should be cylindrical in shape, it measures the circumference and height and alternately conduct the appropriate lines, creating a right angle. Dorisovyvat opposite sides of the rectangle. It cuts out the desired shape from the paper. It is applied to the fabric. From it is necessary to obtain a larger rectangle. He was cut after the desired track is selected. Then the matter is fixed on the template with the help of pins (it is necessary to bend the edge). Then you need to use a sewing machine. The treated fabric is ironed. After that she is glued to the base. Raw slices hiding. The seam is done so that the foundation was closed sewn edge.

select ornamentSticking PVC tapeemarginateCooking ringsglue ringWe note pencil seamsParse and apply the adhesive in the seamPutting seamsWe put under the pressApply the adhesive on the inside edgeEdge fix clothespinSizing the inner ringWe hold a pencil line Sticking paper tapeAlso, the adhesive is applied to the tape itselfIn the tape cut trianglesWrap a piece of tape to the inside Also we do on the other endDraw a line width of 5 cmCut and stitched edges of the tapetape glueThen sticking the seam tape lampshadeOn the edge and sticking tapeconnecting the endsFasten the tape inside the lampshadeLampshade made of fabric

Plastic chandeliers and lamps

Plastic has become one of the most sought-after materials in modern interior. This also applies to luminaires - selling a variety of models. His hands can make a chandelier that nothing will not yield the finished product. Lampshade lighting unit is constructed out of anything. It can be disposable cups, various sticks, painted plastic bottles. They sometimes decorate decorative devices: figurines, glowing details. In various metal frames can be used as an auxiliary material. The easiest way to make a table lamp. You can use the cut parts and shapes with holes. Instead of throwing away unwanted plastic items (use disposable dishes, etc.. Etc..), It is better to try to make them a small light that can decorate a room.

plastic chandelier

Workshop: manufacture of plastic spoons bowl

We need to find a large number of identical plastic spoons, to 200 units. Construct the product of whole appliances will be more difficult, but if you cut them, then everything will turn out fairly quickly and easily. spoon handle to cut and removed, leaving only drew. Then you can use ready-made lampshade for pasting elements or cut it from a flask. From it makes the lower part and doing a hole for a light bulb, or cut off the top of the neck, leaving a sufficiently wide opening. Next you need to determine the pattern. The upper surface of the cups will create rakovinoobrazny drawing, and the lower - "scaly" surface. If you choose the second option, you need to stick to the plastic bottles jumper. First, trim the top, laying out one after the other rows of spoons. When the process reaches the open part, you need to calculate everything so that the last row of concealed cut edge of a flask.

In can be used as an attachment:

  • glue;
  • office plasticine;
  • Scotch.
Cut off the bottom on the bottleCut away the spoon under the basesticking a spoonGlue the final edgingFasten the bulb and wiresChandelier of disposable spoons

Chandelier made of plastic bottles in the form of leaves

Need for steel wire frame, a thin wire, a soldering iron, scissors, ten plastic bottles of various shades of green. Of bottles you need to cut the leaves of different sizes and shapes. Ideal pieces of birch leaves and other leaves with a more or less compact form. Thus, you get a greater number of elements. Sections were imitating the plate, it is better to handle a soldering iron to make them slightly bent. The edge of the tip needs to be done and veins: the leaves will gain a more natural look. Since the bottles have a cylindrical shape, the preform will be the curvature. Hot needle pierced holes for thin wires. It should be at least two on each leaf, but even better four to thread the wire "eight". On each put on as many sheets. Then twist flexible wire securely over a frame of steel wires.

Contact with a soldering iron should be maximally careful not to burn your fingers and do not burn the leaves.

Chandelier made of plastic bottles in the form of leaves

Lamps from laserdiscs

You can make several types of lamps. The materials that will be required: rubber feet, silicone sticks, fluorescent lamp, a circle of fiberboard, CD-drives. Necessary tools such as a ruler, triangle, pencil, compasses, glue gun, screwdriver, pliers, tongs, drill. The round shape of the fiberboard is a hole in the heart, drawn by twelve sectors on it. On the lines that divide them, drilled one small hole. Through them will be stretched steel wires, each of which will house a stack of disks. The design will turn severe enough, so it is necessary metal wires. The hole in the disk of the fiberboard is thrust carried with a cartridge, the bulb is inserted into it. Because discs can also be made light-polyhedron, a sphere cover, petals, lamp-ring.

See also:The idea of ​​placing the light in the interior

Lamps from laserdiscs

Ways to create lamps made of paper

This material is popular due to its flexibility. You can construct an interesting figure, or folded sheets of paper a few times and make the flowers. Folded paper sheets joined in a rounded shape. Paper lamps are carried out in the form of plants, animals and abstraction. Some like to make patterns and cutouts. In some countries of the East widely used rice paper lamps. For the manufacture of the luminaire may be used technique origami. Paper lamps are two basic ways, namely using one or more large sheets or gluing a large number of paper elements. Over the past decade the popularity of purchased table and floor lamps. Paper can be made lamps, cut up the pumpkin and houses. This material is suitable for the creation of the traditional form of the lampshade:

  • conical;
  • cylindrical;
  • elliptical.
Lamp made of paper

Rice or parchment paper

Rice paper is useful to create a Chinese lantern. Additionally require thread, awl, stationery knife, ruler and pencil. First on paper to do the layout. flashlight circuit consists of a plurality of diamond-shaped sectors. Half of them are filled with dashed vertical markings. After that, a sheet folded in an accordion. He rolled in a circle. To the top and to the bottom, you can glue the painted lid. To make the cover of parchment paper, you will need marking board, circular knife, two sheets parchment paper, two rolls of waxed paper (similar to parchment), scissors, silk ribbon, suspended frame. Satin tape strips 18-20 cm long and 40 cm are attached to the frame structure. The final step is pasting on the ribbon circles of parchment and wax paper. Attach them need to overlap.

Lamp of rice paper

Chandelier origami paper bags

To make such a lamp with your hands, you will need a wire with a switch, LED lamp, two paper bags with a picture. First you need to learn how to make simple origami. The next thing in the package is cut off the bottom, retractable handle. They are glued together in one big paper bag. It is folded in half. Both parts of the "transformed" into an accordion. It should be the same 16 bands. The last of them folded on the diagonal. Awl pierced hole. One of the two open sides securely thick thread. the ability to control should remain. The second will open. LED light is connected to the cartridge, lampshade top opens and closes again. It is necessary to light, can not use incandescent bulbs. The wire is fixed on a branch high decorative wood - the product is ready.

Chandelier origami paper bags

Bowl made of corrugated paper

Products from gofrobumagi look very original, so the material has become so popular. Required LED lamp, cable, thread, glue, needle, ruler, a fragment of corrugated paper 44 × 88 cm. The first step is to take a ruler and a pen and paper to mark on the line with the same width. Focusing on the drawn lines, you need to make a smooth sheet accordion. Using needles it is formed diagonally from one end, and then returns to its original position and formed on the other side. Paper needed more time to deploy - it should be allocated diamonds. The entire list now consists of dual forms. The first and subsequent bends need to do the appropriate bandwidth, or appearance of the paper deteriorate. The blank is rolled into a spherical shape, and its upper part is fastened thread.

Bowl made of corrugated paper

Chandelier Butterfly

There are two ways to create such a fixture:

  1. One big butterfly.
  2. "Swarm" of small butterflies of different sizes.

Pre-school children will like the shade of a plurality of suspended figures. The individual parts of the luminaire can fall up to five feet from the ceiling. The basis is taken an old lamp shade or frame. If no such blanks, you can use the rim of metal or wood or thick wire, twisted into a circle. It is necessary to prepare sheets with patterns of butterflies, butterfly to select the required sizes and shapes. Recommended moths at least five different sizes. Then the design will be more visually. Butterfly cut small scissors or knife stationery. It is desirable that the paper was thick. Carved figures are painted in different colors, decorated with sequins, but at some patterns butterflies can already be colored. To bring the product until it is ready, butterflies fixed on the fishing line and attached to the substrate.

Scissors for cutting patterns should be straight, otherwise butterfly hurt.

Chandelier Butterfly

Spherical paper lamps

As decorating elements can be used:

  • fragments of old paper;
  • tissue or paper towels;
  • dense matter, felt.
Ball shaped paper lamp

Ready Chinese lamp can be used as a basis for other products. they are cheap. It needs a perfectly circular pattern. The first option is to cut out circles of different colors of fabric and glued overlapping. From the Chinese sphere can do something like a circular plate bumps. The second method of sheets of paper square shaped cut circles. They are connected in the center, edge lift, until you get the perfect flower. The elements are mounted on ball-ordered rows. Of paper sheets obtained beautiful tartlets. They should be filled with something. Paper and folded into square envelopes, which can be converted in four conical molds. Some use paper instead of the old wall map. In any interior will look stylish lampshade newspaper printed pictures of gray or brown.

Picture on the wall

Lamps made of metal pipes and tubes in the loft

Dysfunctional water pipes with valves can be mounted into a unitary structure, equipped with lamps and to create thereby a stylish and useful thing. It is better to place on the wall. This is a very popular decoration element in the loft. From small and large tubes are fixtures in the style of steampunk. This complex structure, without any special training to make them fail. However it is possible to construct a small robot with a "head" in the form of a bulb. Pipes made of beautiful ceiling chandelier. In addition, there are various models of lamps made of metal pipes. As a material commonly used brass. Chandeliers are compositions in the form of several tubes. The pipes are usually made in one piece, but produced and lamps with various patterns and apertures. They are not inferior to the popularity of fixtures stylist loft.

See also:LED strip in the interior 50 photo lighting ideas

The lamp of metal pipes

Chandelier of brass tubes

You can make a beautiful product in the form of facets of a diamond. Also the pipes themselves require sandpaper jig, twine or wire gloves. To create original lamps 20 need pipe 10 short (6 cm) 5 medium (12 cm) long, and the same (25 cm). We need to find more long workpieces, mark them, and sawed jigsaw. Then you need to do grinding sandpaper to tube edges are perfectly smooth. Then the fragments collected on a thick wire or twine. First, create a horizontal series: the bottom of the five short and average the same number of secondary pipes. Then they are joined by five more short straws. The upper part of the structure is made of five long fragments, which should be combined with an already prepared part. Long tubes are not reduced completely, at this point you need to fix the cartridge.

Chandelier of brass tubes

Headlamps of plumbing pipes

It is necessary to prepare such devices, such as electrical cables, electrical tape, adhesive tape, various screwdrivers, two-wire, ammunition, joints, fittings, coinciding with the parameters of the pipe. One of the tubes must be more - it will serve as a fixture on the ceiling. The assembly process is quite complex. You must create a diagram on paper, and only then get to work. At this stage determined design configuration. Splitter to merge properly. All of the upcoming design can be polished and painted. Better to give preference to white, red, gold and black colors. You have to wait about a day, to all fully dried. Thereafter, all tubes are assembled together. They twist the bulb. The last stage - connection. Since the complex circuit, it is better to invite a specialist.

The lamp of plumbing pipes

The use of glass to create fixtures

On the ceiling you can hang a composition of several empty bottles of liquor. Three-liter jars can be suspended from metal chains. Glassware is also suitable as the ceiling. The lamp of the plurality of glass fragments can simulate a crystal chandelier. Broken glass objects found new purpose as an original lighting device. From glasses and wine glasses are beautiful table lamps. Can be useful to various glass boxes, glass of the old wall sconces, lamps, interior doors. Homemade glass chandelier can watercolor paint or paints stained. We get the beautiful stained glass windows. To create a master hanging lamps use a variety of decorative containers out of oils and perfumes. Unlike wood and paper, glass has a high fire safety.

Glass Lamp

Lighting of wine bottles and wood

The list of required tools include pliers, screwdrivers, screws, glass cutter, silicone, cloth or brush, stain, pine boards, hooks, chain, ten light bulbs, wiring, a bottle of wine. The first step of the process vessel. With the bottles removed labels and adhesive residues. With stekloreza need to remove the bottom of each bottle: it rests at a height of 1-2 cm, and the bottle is spinning around its axis. Cracks must be obstuchal hammer until the bottom will not disappear. Thereafter, electrical wires placed in the bottle and connected to the cartridge. They screwed the bulb. Now we need to prepare the board. At the bottom, larger drill holes for the necks and wires. Outer gather them into a single beam. The bottom board screwed hooks for chains that will keep the structure. For the kitchen, you can make a table lamp with a base of the bottle and the canopy of the tree.

Wooden boards can be covered with stains to give the effect of "old".

The lamp of wine bottles and wood

Using old cans to create fixtures

Old jars can be found a new purpose. Fixtures can be created using thread, electrical wires, handles for cans. Tanks must be fitted with handles. They will need to tie a thread, attached to the pre-prepared iron frame. The bank lowered the electric wire with cartridges and light bulbs - the chandelier is ready. You can make an option for the garden - the thread is tied around the tree branches, and inside the cans are placed candles or small flashlights. It looks beautiful container, wrapped in colored thread, or decorated with patterned napkins. The inside of the cans can be painted in white, and so far it has not dried up, put a picture in a chaotic lines. Some paint container from the outside in different colors, and the top paint the image with glitter shadows. Banks also can paste over the fine cullet.

The lamp of the cans

Chandelier / lamp in style Shabby-chic

Of beads and fabrics are beautiful decorative items including lamps, typical of this style. Decorating style Shabby-chic provides that the room can accommodate a girl or woman. Need beads, thread, string, a cartridge with a lamp, ready to wooden or metal frame. The first thing you need to paint the base in some of the soft shades. Thereafter, it can wind decorative elements or cloth. The top of the ceiling wrapped beads smaller, but more - on one thread need to string up to 40 beads, while the lower yarn - about 20. This exemplary proportion, it, as yarn tension can be varied depending on the design dimensions. The lamp usually pink fabric adhesive qualities. All ornaments are hung so that they flowed down.

Lamp in style Shabby-chic

conclusion

Chandelier - the single most important element of the upper part of the room, it can create symmetry and other geometrical accents. To hang himself in his room a beautiful, stylish, designer lamp, not necessarily to buy it in the store. Each house has enough items and tools to do it all yourself. In most cases, the workpiece, scissors, paper, glue, thread, frame, lacquers and paints. Sometimes you may need the help of an electrician. Most of the "hendmeydovyh" fixtures made of wood, plastic, paper, glass, textiles or metals. There are also more exotic options using different structures, small parts, molds. Homemade chandelier should not only fulfill an aesthetic function, but also qualitatively illuminate the room. Design should be wisely.