Ornamental trees with their hands: 9 master classes 50 photos

Ornamental trees are considered to be a worthy ornament of the house. They are appropriate in any environment, you just have to think in advance color scheme that fits into a finished design project. Ornamental trees do not require special conditions and care. They should not be watered as they are artificial plants. These items decor freely sold in stores, but it is better to do with their hands Topiary. For its production need to spend some time, but eventually get a unique decorative wood, fits perfectly into the existing interior space. And it's better to build your own topiary as the Chinese ancient teachings of feng shui tree brings joy into the house. Making ornamental tree, a man of his charges. According to legend, topiary can bring happiness only to its creator.

Topiary: history of occurrence and importance in the modern interior

Topiary Topiary word or is derived from the term «topia» - ornamental garden. The concept comes from ancient Rome and meant a cut from the tree crowns or kustovrazlichnye figures. Ancient Roman civilization disappeared, but the idea of ​​beautiful gardens draw caught the Catholic Church. Topiary then entered the social life. They flourished in the XVII century: it was then ornamental trees appeared in the residences of the rulers of states, including and in the Russian Empire. Then forget about them, but in the XX century topiary again become popular. Now they are no longer adorned the walls of palaces and gardens, and planted in pots. Today Topiary is not planted. They can be made of any material. Topiary made the most bizarre shapes and colors, often quite controversial combining materials. In another way, they are called trees of happiness, considering that they bring into the house of joy. They can make out:

• coffee beans;
• walnuts;
• fir cones;
• straw;
• candy;
• napkins;
• silk ribbons;
• plastic bags, etc.

How to start a tree assembly

Topiary assembly is necessary to start with the planning of the future appearance of the tree of happiness and find the right parts. Appearance Topiary conditioned interior style for which he is made. For a start there are the materials needed to construct the tree base. In any case, you could tape, glue, colored paper, polystyrene foam, polyurethane foam, etc. Parts list is limited only by the creator of fantasy. After gathering the necessary things, you can create topiary. First it is going barrel, since it is the basis of topiary. And it should not only strengthen but also to varnish or paint. Then, one end of the barrel is attached to the pot, stone or shell, and a second hanging ball that would eventually become the crown tree of happiness. For bonding all parts of Topiary is best to use glue.

The basis

To construct a tree of happiness bases fit all that is in the moment at hand. To make the base of the newspapers, first they need to be thoroughly crush, and only then form the scope of the specified parameters. Newspapers rumpled and pressed tightly, and then are wrapped with tape. Also, the foundation can be made of newspaper clippings, but in this case they should be folded in a plastic bag. If you want to make a small base of syntepon, it must first be compacted into a sock or stocking, and then make the necessary form and tightly wind the thread for sewing. Better yet, make this the basis of foam, taking ordinary packaging of household appliances. But the foam crumbles, it is inconvenient to roll into a ball, so this base is not very popular. In addition to the above, the basis of topiary can be the following materials:

• polyurethane foam;
• Knitting thread;
• papier-mache, etc.

Trunk

Trunk trees happiness connects the base with the crown, so it should be durable and sustainable. In his role may be a common wire, fixed rhythmic ribbon, twine or plastic. For realistic product this barrel can be made of wooden branches or chips. But before this thread should be cleaned from bark, varnished and stained. If made low Topiary, then as the barrel can take the stick from popsicle sticks fastened together for sushi or wooden shpazhek. The color and type of the trunk depends on the foundation and crown of the material. For Topiary with coffee beans suitable white or brown. Curved barrel for European trees can only be made from wire. You can also take any material suitable for a trunk Topiary, decorate it and fill with plaster.

Crown

For the manufacture of crowns Topiary suit absolutely any material, which are currently at hand. To do this, you can take paper napkins, corrugated paper origami folded, nylon tape, etc. Then you need to decorate the crown. To do this, take a fir cones, real seashells, coffee beans, artificial flowers, etc. Crohn's is a principal emphasis trees of happiness, so its design should be approached very seriously. Trunk and stand only emphasize common themes Topiary, so it is advisable to first determine the material for the crown, and only then design the rest of the tree. But too much of the crown of the barrel Topiary can not stand, so it should not be overloaded. Some elements can only decorate the stand of the tree of happiness.

Stand

As a stand Topiary can take an ordinary flower pot, a large flat stone or iron bucket, beautifully decorate them and put under the crown. Decor coasters tree of happiness can be anything. It is decorated using decoupage technique, process or lace bright unusual patches. On the stand you can paste stones, shells, and artificial flowers. This element Topiary is a semantic extension of the crown, so its design needs to be based on already existing elements of the decorative items. If the tree is made out in a nautical style, it would be appropriate shells and colored stones, and for topiary in a romantic style lace and need of colored paper hearts. On the size of the tree crown has to be larger than its stand that the composition looked harmoniously.

for the manufacture of wood Workshops

Topiary make their own hands simply. You do not need to have artistic taste of the designer or education. Perfect good luck tree decorated intuitively from the available materials. On the Internet there are a lot of workshops on the subject, some of which are listed below, but do not follow these instructions step by step. According to Feng Shui Topiary quickly and effectively activate any sector of the apartment or house, immediately filling it with the desired energy. But to work properly it is necessary to decorate the item. To normalize the family relationship, the stand Topiary should stick jasper or Amazon. Climb the ladder to help tree with tiger eye, charoite or turquoise. And to improve the overall financial position should be decorated with topiary gagate or Hawkeye.

Of coffee beans

To do this, you need to take Topiary quality large coffee beans and stick them on the basis for the crown, laying down a central strip. The ball is glued completely. It is better to take the glue gun, although you can do without it, using regular glue from a tube. When the balloon is fully taped, takes plastic tube which glued the entire length of double sided tape, departing from both edges of 2-3 cm. On the tape pasted satin ribbon, cloth or corrugated paper the desired color. Then it is necessary to dissolve alabaster and pour the resulting mixture into an iron pot or bucket. Then this mixture is inserted into the barrel and wait for the plaster hardens. After curing the mixture the surface spread coffee beans in 2-3 layers. At the very top of the barrel is attached finished crown.

The resulting Topiary can decorate elegant bow or jewelery.

of cones

Topiary of cones made with his own hands on a similar scheme. On the foam ball glued a small pine cones a small half-open intervals from each other. If the gaps are too large, they can be filled with acorns and chestnuts. For additional fixing elements can be used gold or brown thread. it is necessary to put together a few (up to 10) shpazhek bamboo, to wrap their thick white or brown thread, leaving the edges stick open sites for the manufacture of the barrel. Then you need to dilute plaster with water or take ready-made cement mixture, pour it into the pot and insert the basis of tree trunk. When the mixture hardens, it is decorated with needles or sisal, the barrel secured fully executed tree crown happiness, and decorate the pot or openwork satin tape.

Of satin ribbons and other tissues

As a basis for Topiary of satin ribbons can take Styrofoam sphere or ball of crumpled papers attached thick filaments, soaked in glue PVA. Then you need to take satin ribbons in different colors, twist them into small rolls, pre-bending the ribbon at a right angle. Cranking satin ribbon is necessary several times, until it dlinane end. As a result of these actions should get a rose bud. At the end of the manufacture is necessary to stitch all the petals thin silk thread at the bottom. The amount of such base is determined by the dimensions of roses. Usually 20-30 flowers required. Then they decorate the crown Topiary. As for the trunk of the tree, you can take an ordinary twig, and for the stand to use a clay flower pot. The stand and the tree trunk to decorate elegant green leaves of satin ribbons or silk.

Corrugated paper

First you need to take a round Styrofoam ball. Then you need to make rosettes from crepe paper. If they are very large, between flowers have plenty of free space, which will need to be something close, so it's best to do these roses average. On one small topiary need 35-45 roses. It is better to take the paper of different colors to further alternate shades of roses on Topiary. Tree trunk for happiness can be drawn from the traditional chopsticks for sushi as well as a primer to take an ordinary foam. Alabaster is difficult to do, and the foam is easy to find. Only the trunk at the base of the foam should be inserted on the first try. At the same time it is necessary to decorate the crown, pasting roses in a chaotic manner. Then the crown is attached to the trunk and Topiary considered ready. If desired, the soil in the pot spread artificial grass and tree trunk decorated with a bright bow.

Topiary in the marine theme

Marine tree of happiness can be made from materials brought from the sea: pebbles, shells, dried crab and pearls. They should be the basis for the paste over the crown Topiary. If the shells and pebbles a little space between them can be decorated with sisal, artificial starfish and crafts from salted dough on the marine theme. Performing barrel Topiary better to take the sticks for sushi decorated with satin ribbons of white, blue or sand color. In a stand for trees to be happy to take a white flower pot, which can be decorated with artificial pearls, lace and small figurines of salt dough. Inside the pot to pour alabaster and paste into the mixture of alabaster trunk topiary. On top of the frozen filling can put fiber sisal, sea stones and seashells.

Money Topiary of coins and banknotes

This is usually done Topiary of counterfeit notes, but for the entourage can be attached to the crown of the tree stand or real coins. Of course, it is better to use than the usual, and rare, ancient or foreign coins. To begin, each bill have to be folded in half, just by sliding the edge, and then lay down in her envelope, fixing uneven edges double sided tape. The number of bills depends on the size of the ball of the base, but usually it takes about 20-25 notes. The trunk of the tree of money can be made from twigs or palochekdlya land, and as a support to take the pots. Planters from the outside can be decorated with a special self-adhesive paper with a picture of money or lace. As he poured a pot of alabaster, put into it a trunk and wait for its drying. After that, the ground Topiary spread coins, sawdust or wood decorative ikamnyami.

Of dried flowers and natural flowers

Tree of dried flowers is quite simple. You can decorate the basis for the crown Topiary withered flowers and yellowed leaves, but flowers and leaves taken for those purposes, should be strong and tight, otherwise they fall apart during work. Dried fixed directly on the foam ball. As the barrel take a curved twig with preview, and in the stand becomes usual clay pot. Pot inside poured alabaster, pre-fixing barrel topiary. This barrel is inserted into the finished crown of the tree, and a dried plaster decorated with dried leaves and flowers. Topiary of flowers are usually created by professional florists, but you can try to do it at home by yourself. For this we need to take rosebuds, daisies flowers, lilies or chrysanthemums, correctly and carefully cut them sosteblya and attach to the base of the crown. The rest of the procedure happiness tree production and decoration Pots Topiary similar to its manufacture of dried flowers.

Beads, crystals and other crystals in the manufacture of wood

Before the start of manufacture Topiary need to draw a diagram and a picture. Crohn tree happiness may be a conventional multi-colored ball or unusual combination of textured products. Beads are very shallow, so it is not attached to the basis for the crown for one little thing. To do this takes a thin wire filament, and which to put on the beads of a specific color and texture. The wire is strong and can hold their own shape, so that the tip of topiary can be turned into a flower bead weavings. Rhinestones are also attached to the belt on the basis of the crown. Beads and sequins to decorate the trunk of trees should be (conventional sticks for sushi) and a stand. When using a stand, you can take an elegant flower pot, iron bucket, a large stone or a mass of plaster on the grid, and then painted in the desired color. Then pot Topiary need to draw beads.

Making a bonsai tree

Bonsai - a decorated oriental art growing miniature copies of these trees. For growing a bonsai suited hawthorn, pomegranate, Calamondin, etc. But for manufacturing, rather than growing ornamental tree is better to collect or buy a hydrangea blossoms. Collected inflorescences should be well dried for 5-6 hours. Then, hydrangea flowers to fix on separate branches and driftwood that are on the opposite side of the ball jammed foam. These snags can be replaced with a three-conductor wire. Then prepared under the tree container (bowl, ashtray, pot) to gently pour in the plaster. Then it is necessary to put the middle part of the pot base bonsai and fix the resulting composition is a mixture of gypsum and PVA (consistency of thick cream) while securing the trunk and branches. Thereafter, the entire structure to dry for 24 hours. After one day, you need to paint the tree trunk with acrylic paint or ocher.

After drying, you can decorate your bonsai green decorative elements.

conclusion

Ornamental trees with their hands can decorate any interior. They can be made from any scrap materials: yarn, satin ribbons, cones or shells. Also, good luck tree made from fresh flowers, but these compositions are not always obtained from non-professionals. Usually they do florists for weddings. After all, if their registration is required not only firmly secure the crown of trees of happiness, but also to prepare the colors used correctly. If you cut the flower properly or place it with the plant unfriendly to him, he quickly wither and lose its Topiary stylish appearance. Topiary and Bonsai suitable for decorating living rooms, bedrooms or children. They complement the unusual design solutions and make the interiors homey and relaxed. A feng shui correct location and stylish decoration topiary will bring to the house of happiness, health and wealth!