Grille gas cookers: several cleaning methods

Stove in the kitchen is the most difficult place to clean any housewife. A grid on the gas stove - this is the most problematic place. It grates on gas accumulates the most fat. And to get rid of it, sometimes you need a lot of effort. Modern hostess often use new cleaning agents to clean grates on the stove. There are different ways to clean the grate gas stove, and it is important to know which tool to use for a given lattice.

General rules

In order to effectively clean the grille, a few rules must be followed:

• Before you clean the surface, it is necessary remove the burners and handles, Put them in a basin with hot water. In this capacity, you must add a few drops of detergent that dissolves grease well. Then you need to hold the sponge on the product and leave it for half an hour in the pelvis. You can then wash the remaining contamination. If you fail to remove the handle from a gas stove, it is necessary to moisten a cotton swab sal ammoniac and handle knob plate.
• Now you can begin to clean itself and lattice. It is worth noting that the surface to be cleaned after each use. Otherwise, it will accumulate a lot of fat, which is very difficult to remove. The product, put it in a basin of soapy water and leave for a while and wash off the remaining contamination.
• Once the oven and grill are clean, they should be wipe dry. This rule is strictly enforced. Otherwise, fat droplets will again adhere to the surface. Do not leave on the stove spilled soup or baked-on mess, you must immediately remove impurities. Otherwise you'll have to tear off the fat from the gas stove.

Folk remedies

The first folk remedy for cleaning products is soda. To do this, soda mix with water, Achieving consistency of porridge. Then apply it to the surface. Leave the product for about an hour. After that, it is necessary to wipe the first hard brush, and then a sponge.

• Conventional baking soda is a versatile tool for cleaning the surface.
• Second means for washing the grille is hot water. We need to take a deep pan, pour water into it so that it covers the grille completely. Then heated in an oven to put the baking sheet. Contamination from the hot water will come off from the surface. Then you have to wipe the surface with a cloth or stiff sponge.
• The third option for washing - this pair. Cleaning the surface can be environmentally friendly method using a steam generator with a circular rigid brush. With the help of a couple, you can easily get rid of the fat layer on the surface. And to remove grease residues with a brush. It should be noted that this method is suitable for grids, which can not be removed with a gas stove.
• The fourth way - is mustard. Mustard powder is able to break down fat, which is why it is used as a disinfectant and cleaner. In order to wash the fat with mustard powder, to be diluted with water. Should get a paste which must be applied to the surface and leave for two hours. After that, all you need to wipe with a sponge and rinse with water.

Cleaning of different materials

Gas grilles are made of different materials. That is why you must choose a way to clean the surface, that is right for this kind of material.

iron alloy

This material is considered to be one of the most awkward materials for cleaning. Do not try to clean the surface with a dishwasher. Sometimes the hostess clean the surface with a knife and a hard sponge. result - unsightly scratchesWhich are conspicuous and spoil the appearance of the gas stove. purification methods:

• Calcination. This option is suitable for use in the country: An open fire. Of course, you can make calcining the apartment. For example, on a gas stove. Pre-need to turn on the hood, as it will be burnt the fat, which will keep the unpleasant smell. After calcination is complete, the bars should be wiped with a cloth.
• mechanical version removal of contamination. To do this, you must purchase a metal brush. It is mounted on the drill by which rotates and clears the grille from dirt. This option is perfect for grids, which can not be removed or disassembled.
• For cleaning fluid is applied more and washing a car engine. To do this, apply a liquid on a sponge and rub the grate. Then rinse and dry the surface.

Stainless steel and enamelled

This lattice can be cleaned both on the plate and in the bathroom. For a lattice of stainless steel can be used Any cleaners, Including abrasive, which can not be said about the enamel. This surface requires careful treatment. For cleaning do not use hard sponge, especially a knife. Methods for cleaning the steel gratings:

• Chemical means. When working with them need to protect the eyes and the respiratory tract to block such material.
• Excellent option for washing the steel gratings are Gili "Antizhir". To do this, apply the cleanser on the surface, hold it for a while and wipe with a sponge. After that can be washed with water and dried.
• Using vinegar. The vinegar should be diluted with water, after which it is necessary to fill such a solution the pan and put to an iron grate. Leave for a few hours. After all the fat is dissolved, wipe the surface with a cloth. If the tool has a pungent odor, it is not necessary to work indoors with him. This is best done outdoors or with open window.
• Soap solutions. This method is a classic. But it requires more time and effort. possible to use chips of soap or detergent for manufacturing soap solution. They should be mixed with hot water. It is necessary to take a large basin, wherein the dilute soap solution. Put back the bars and leave overnight. In the morning, you can use a rigid sponge with which to scrub all the dirt on the surface.
• Melamine sponge. Not so long ago it went on sale this sponge, but it has already become popular among housewives. Melamine sponge is easy to cope with a variety of contaminants. To wash sponge products of this it is necessary to moisten with water and wipe the surface. After that, it is necessary to remove the foam with a dry cloth and wash the surface. Melamine sponge containing such substances which cope with various contaminants.
• Dishwasher. This embodiment is perfectly suitable for the surface of the enamel. Before you load the grid in the machine, you must remove all rubber and plastic parts. Detergent should be added to more than usual. This is especially true in cases where the surface is very dirty.

The main thing - do not forget to dry the grille for cleaning, so to her wet surface immediately did not bother the fat and soot.