How to clean the water cooler yourself at home

Almost every office should cooler. Everyone has seen such large devices, which are placed bottles of water. Coolers are very convenient, especially if the office is working a lot of employees, or whether it stands in the apartment where he lives large family. Also worth noting, and advantages of such devices is the ability to receive and direct the cold and hot water without the need for a refrigerator or the kettle.

Large vehicles that are rented by companies or large families, at regular intervals, check the working, of bringing coolers and implement maintenance and cleaning. Services are often provided free of charge by the companies that provide cell phones to use.

In addition to the large apparatus, there are little. They put in the kitchen for use by all family members. Cleaning such a small cooler rests on the shoulders of their respective owners, which sometimes becomes a problem. Far not everyone knows how to properly clean the cooler at home with their own hands.

General recommendations

Implementation of any cleaning unit It can cause damageIf this man put his hands completely in the ignorant. The cooler can also be damaged if engaged in cleaning it, without knowing anything about how this should be done. That is why it is better not to risk the safety of the device and to begin to get acquainted with some simple rules that can help in the implementation of this process.

So, in order not to damage the unit when it is clean, it should be adhere to the following guidelines:

1. In any case it is not necessary to carry out cleaning of the cooler under running water. Even in cases where the cooler seems too messy.
2. The device is strongly recommended to put in the dishwasher. Also, do not use a steam cleaner to disinfect it.
3. To avoid damage to the cooler is recommended to not use any abrasive products. Also, do not use solvents such as gasoline, kerosene or acetone, as well as powders.

Nuances cooler purification

The instructions to the device by the manufacturer should be written period of six months. It indicates, how many need to carry out cleaning of the cooler. It is recommended to carry out cleaning of the device monthly. The reason is that bacteria accumulate constantly and can get into the water that consumes the whole family. You can give a very simple example, dishes are washed after each reception of food, rather than a week or two. Microbes may enter and instrument assembly, and replacement of the bulb with water.

Replaceable container with water some time talking to the user, so that it can accumulate a sufficient number of microbes. It is therefore recommended before replacing the capacity to wipe it antibacterial wipes around the neck.

Also not recommended to wait until the last and endlessly postpone cooler cleaning for tomorrow. It is not necessary to wait for cooler conditions in which air valves begin to leak or, on the contrary, become clogged. Besides bacteria, the instrument can be struck by the scum, that after a certain time can lead to failure of the device. Also, accumulation of scale and lead to bacterial contamination of water consumed, which may lead to a deterioration in the health of consumers.

If the delay with the cleaning, the cooler can reach such a state, in which it will be impossible to clean without using special chemicals. But this is not the worst possible situation. In some cases, the need to carry out the assembly of the device to clean it, and then the problems begin. They concluded that such cleaning can be carried out only professionalsAnd clean the cooler with their own hands will not succeed.

If the user does not know much about when to carry out cleaning the machine, it can focus on the changes in taste and smell of water consumed. The fact that the pollution of the water cooler is an unpleasant smell and taste.

The algorithm

Before you start cleaning the cooler, it must be remembered that there is a certain sequence of actions carried out during this process. It is recommended to be cleaned when the water in the tank replacement is over or nearly over. This will make the cleaning process easier and faster. You should also remember the important thing: the device be sure to disconnect from the mains before cleaning.

Next you need to follow the specified action:

1. To get started is to wipe with a damp cloth cooler. However, for these purposes can take a cloth moistened with a special detergent solution, or antibacterial. On the surface of the device is also collected a sufficient amount of dust and germs, which can also affect the state of water consumed.
2. In that case, if there is water in the bottle, then it will need to be drained. After the container will be completely empty, it would simply withdraw.
3. To wash the cooler must first be drained from the faucet for hot water, and then - the tap for cold. There should be careful when draining hot water, as there is a risk of getting burned with boiling water.
4. At the bottom of the device there is an opening closed by a stopper. The need to unscrew the plug to drain the remaining water. Drain hole may also be provided on the rear wall. Location it depends on the model. After remaining moisture will be drained from the appliance, the plug will have to be put back.
5. You will then need to unscrew butylepriomnik. This can be done by turning it counterclockwise.
6. For the next step required to prepare beforehand the solution of citric acid. It is made from the calculation of 100 g per 5 liters of water. In the event that the cooler is in advanced stage, it can be used to prepare the solution agent "BIOR 1" (25 mL per 1 liter of water). It is recommended not to heat the device, since there is risk of damage to the vessel or the heating element. The prepared solution will need to fill in the open hole.
7. Both tank unit will fill up to the top you need. Check it will be easy - it will be enough just to keep the water taps of the device. If the tanks are full, the water will flow from them continuous jet.
8. After all done with manipulation and preparation of the solution, followed by pouring into tanks cooler device need to be included in the socket, and then turn off when the water heats up.

The final stage

After the above actions have to wait 5-6 hoursTo disinfect the unit inside. During this time, you can peel and other parts of the cooler, so you will need to disassemble: Remove the grille and drip tray, and then wash them with dishwashing detergent.

After five or six hours the water they need to drain the cooler. At first the water is drained from the taps, and then from the drain hole. Taps also need to unscrew and then clean them Yorshik. At home, they can be used for cleaning ordinary dishwashing detergent. Washed cranes then it will be necessary to tie back, then rinse with clean water will require the entire system with clean water. Washing is recommended to be repeated two or three times.