How to clean a washing machine from scale with citric acid?

Washing machines are expensive, and when buying any user expects that the unit will operate for more than one year. One of the frequent causes of failure of automatic washing machines is hard water. Rather, scum, which is formed on the TEN and other details of technology. To prevent damage to the machine, the machine must be periodically cleaned, not only its outer panels, but also internal parts. One of the simplest ways is the use of improvised tools, it is important only to use them correctly. How to clean the washing machine from scale with citric acid - we will tell in this article.

to the table of contents ↑

Features of the "lemonade"

This ingredient is used for cleaning electric kettles and samovars. There is quite a logical question: is it not to use "limonka" for cleaning the washing machine? Naturally, there immediately arise regular accompanying questions:

• Will the substance be broken by rubber gaskets and plastic parts?
• How much citric acid is used for effective and safe cleaning?
• Do I need to clean the stylalk at all?
• If necessary, what is the frequency of the procedure?

Below you will find the answers to these questions, which will allow you to extend the working life of the erasing technique.

to the contents ↑

How do I clean the washing machine of lime with citric acid?- Step-by-step instruction:

1. About 60 g of citric acid is used to clean the washing machine, designed to load 3-4 kg of dry laundry. How much to pour citric acid to clean the washing machine, calculated for 5 kg, can be determined by simple calculations.

Important! Depending on the type of packaging, you need 3 sachets of 20 g or 4 to 15 grams. This will be approximately 2-3 tablespoons of powdered crystals.

1. Pour the crystals into the compartment intended for filling the detergent powder and turn on the washing.
2. Choose a full program that includes rinsing and spinning modes.

Important! You can choose a mode of washing cotton products at a temperature of 60 degrees. This is quite enough to effectively clean the machine with a preventive purpose.

1. After you press the start button, the machine will do the rest on its own. Water with acid dissolved in it will clear the plaque, and all the dirt will be discharged into the sewer.

Important! Specialists involved in the repair of washing machines are advised to clean the machine once every 4 months. If you live in a region with extremely hard water, then you can use this method for cleaning and more often.

to content ↑

Advantages of the method:

• Of all the existing methods of cleaning the machine from lime scale, this is considered the most affordable, simple and inexpensive.
• In addition, citric acid dissolves in water and in small amounts is absolutely safe. Along with this, many special products are rinsed out badly, settling on the fibers of clothing.
• Moreover, "limonka" is a part of many special professional cleaning products.
• As far as efficiency is concerned, citric acid perfectly copes with calcareous deposits. In any case, not at all worse than the specialized tools that are sold in the store.

Important! It belongs to the category of carboxylic acids reacting with insoluble salts.

If you are thinking about how to clean the washing machine from scale with citric acid, do not doubt the effectiveness of the method.

to the contents ↑

What is harmful for solid deposits?

When the water is heated, the salts that are in the dissolved state are precipitated in an insoluble precipitate and settle on the heating element. This is scum. If you neglect the cleaning of the stylalki, the energy consumption increases. But this is not the worst.

Over time, the heating element completely burns out. The plaque layer conducts heat poorly, and the heating of the water is slower. At the same time, the heating element heats up more and more, eventually - burns out.

to the contents ↑

Safety precautions

With the use of citric acid, one should follow the same principle that medical professionals profess: "Do no harm!"

Here's what you need to know before cleaning the washing machine from scale with citric acid:

• If you pour too much substance, it can damage the parts of the washing machine. If you "go too far" with the crystals and turn on the wash mode at 90 degrees, citric acid not only dissolves the scum, but also corrodes rubber and plastic parts.
• Heated water only slightly accelerates the process, so you can cope with the scum without heating the water too much.

Important! The scum is formed most intensely by boiling water, and boiling the laundry in the stylalk is infrequent. Therefore, preventive cleansing once every four months to six months is enough to avoid malfunctions associated with scum.

to the contents ↑

Prevention of plaque formation

To prevent the build-up of the details of the washing machine not so intensively, it is necessary to observe the following recommendations:

• Use special softeners to help reduce water hardness.
• When using detergent, please strictly follow the instructions. It is desirable to use a product that includes a water softener.
• Do not wash too old things in the typewriter, as the particles of fibers settle on the details of the technique.
• Do not forget to wipe the machine after washing with a dry soft cloth.
• Do not wash items at temperatures exceeding 75 degrees.

If you take care of the washing machine correctly and do not neglect regular preventive cleaning, then the question of how to clean the washing machine from scale with citric acid, you will ask yourself infrequently.