Jeans dress with own hands

Any denim piece is a real event, whether it's thin jeans or soft denim. Modern fashion can not be imagined without things from denim. This year, the top popularity among jeans clothes won dresses. Unusual and stylish models fit perfectly into any women's wardrobe, as all jeans products are universal, they suit both thin girls and plump women. Nose, comfortable and effective fabric can turn into a masterpiece, if you sew a jeans dress with your own hands. Today, we will tell you how to cut a jeans dress with your own hands from a man's shirt, we'll introduce it to a boot that allows you to sew a light dress with a floral print.

to the table of contents ↑

Sew a jeans dress from a male rascal still a sobashka

If your husband has a jeans rub of a student's age, do not throw it away. From a man's shirt you can sew a beautiful summer sarafan. If the shirt is large, then there will still be enough cloth and accessories, for example, a handbag. You can also use sleeves to pattern additional pockets for the dress.

If you decide to sew a denim dress( sarafan) in a free sports style, then use any suitable pattern from the magazine.

Instruction on manufacturing:

1. Cut the sleeves from the shirt, as we will sew a sarafan.
2. Separate the seams on the product. If the shirt is too large, the seams can be cut.
3. From the front of the shirt, cut the front of the dress, aligning the waist line( on the future product) with the middle of the height of the shirt pockets. All available parts of the front part should be kept, since on the denim fabric, the discarded elements are very noticeable.
4. One coat of coquette can be cut, as on men's shirts, a coquette is usually double.
5. From the backrest, cut the lower part of the back of the sundress, combining the top section with the seam, along which the shirt coquette is sewn.
6. From the sleeves, cut out the upper parts of the gear and the backrest.
7. From the remains of the sleeves, cut out the burlap for the side pockets( in the side seams).
8. Connect all parts and start sewing.

Tips:

1. If you do not make pockets in the sarafan, then the algorithm for making the sarafan is much simpler: tuck and top of the transfer, connect to the bottom. Do the same for the backrest. Treat the shoulder and side seams - the sundress is ready.
2. To hide the difference of new seams from factory seams, close new seams and cuts with leather edging.

to the table of contents ↑

Sewing a dress of a shoe cut

This season is an extra-popular dress with open shoulders. We suggest to sew such a model using a minimum of measurements. In addition, the pattern itself can be built directly on the fabric, having previously made some of the simplest calculations.

For sewing a dress you will need:

• Fine jeans fabric with embroidery( length - about 1.3 m, width - 145 cm).
• Elastic band with a width of 5 cm( 0.8 m).
• Elastic band 1 cm wide( about 3 m).

You will need to cut out of denim:

• Spin( 1 piece) with a fold.
• Before( 1 piece) with fold.
• 2 sleeves. Sacking for pockets.
• A strip for processing kulisks on a waist( 6 sm on width and length by measure).

And now we will acquaint you with the booty cut, which is known since the 17th century.

Feature of booty cut

To its name, as well as the origins, this kind of cut is due to the city Sapozhok. Basic principles of boot:

• Simplicity. Fabricity without waste.

Important! Products of this cut are sewn literally in a couple of hours, while landing is always ideal. High fashion has long turned its attention to this truly unique and ingenious cut.

Features of cut:

• The patch is lowered by 3-4 cm. This technique emphasizes the elegance of the hands and gives freedom of movement.
• The raglan line with a slight slope adds femininity - to both the shoulders and the figure as a whole.
• The width of the sleeve is at the widest part of 36-40 cm. If the hands are very full, then increase the width of the sleeve by 3-4 cm.
• Using this cut, you can simulate a variety of styles of blouses and dresses.
• There are no complicated details.
• The simplicity of cutting makes it possible to cope with sewing even beginners.

Measurements for the construction of a dress pattern

To draw a dress pattern, you need to take a few measurements:

• Chest circumference( OG).
• The length of the product to the waist.
• The length of the dress from the waist.
• Sleeve length( hand length minus 20 cm).

In order to build a pattern, perform simple calculations:

• Backrest width: ⅛ OG + 5.5 cm
• Width of transmission: ¼ OG - 4 cm.
• Armhole width: ⅛ OG - 1.5 cm.
• Depth of armhole: 1/ 10 OG + 10.5 cm.

Important! To make the dress more elegant and have an adjacent silhouette, use the following measurement: hem of the hips + 8-10 cm for freedom of fit.

Instructions for pattern building:

1. Put a dot( A) in the top corner of the paper.
2. Down along the vertical line from this mark, postpone the measurement of the depth of the armhole( calculated minus 4 cm).Put the point( D).
3. From the initial mark( A), lay down the length of the article to the waist minus 10 cm. Set the point( A1).
4. From the A1 mark, set the length of the dress from the waist. Put the point( C).
5. Down and up from the A1 mark, put 3 cm on the rubber band.
6. Swipe the horizontal lines to the right of the set points( A, G, A1, C).
7. From point A, postpone the following measurement to the right along the horizontal line: ½ the calculated back width x 1.4.Put the point( P).
8. Delay from this point( P) the following measurement: the calculated width of the armhole x 1.8.Put the mark( P2).
9. From the mark P2 to the right, postpone ½ of the transmission width( calculated) x 1.4.Put the point( B).
10. From mark B, draw a vertical line until it intersects with the horizontal line drawn from point C. Point the intersection of the straight lines with the letter D. The pattern will be the rectangle ABCD.
11. From points P and P2 draw vertical lines. At the intersection with the horizontal line drawn from the mark F, put the points P5 and P6.
12. Divide the segment P5P6 in half, mark the point P4.
13. From point P4, lower the perpendicular to the segment CD.This will be the side line.
14. From the points P5 and P6 upwards, set aside 7 cm.
15. Build the armhole line: PP1P4( for the backrest) and P2P3P4( for the transfer).
16. Cut the transmission and back parts along the side line.
17. Cut the parts separately with the folds on the fabric.

Drawing a sleeve pattern:

1. Draw a rectangle with a width equal to the width of the sleeve( about 40 cm) and a length equal to the length of the sleeve( about 41 cm).Call it A2A3A4A5.
2. Set aside A2 to the right, and from A3 to the left, 7 cm. Mark points P and P2.
3. Measure the distance from mark P to point P4 on the backrest pattern.ПП4 = ПП1 + П1П4.
4. Transfer the pieces PP1 and P1P4 from the backrest pattern to the pattern of the sleeve.
5. Similarly transfer the armhole length to the sleeve( P2P3 and P3P4).

Optional:

1. Model the burlap pocket in the side seam. On the pattern, mark the location of the pocket.
2. Make an increase in the whole-piece perforation of the kuliska under the rubber band for each part: back, forward, sleeves( 6 cm).

Important! After constructing the pattern, check the dimensions of the girth of the hips.

to the contents ↑

How to sew a denim dress?

Cut details from denim material: back, front, sleeves, burlap pockets. On the fabric, follow the layout in two folds. When cutting the fabric, leave allowances for seams of 1.5 cm and allowances at the bottom of the product and sleeves - 6 cm.

Sewing process:

1. All allowances are swept with an over-seam.
2. Create pockets in the side seams.
3. Pull off the strip along the markings along the pockets.
4. Stitch the side seams.
5. Stitch seams on sleeves.
6. Pratachaet sleeves to the dress, combining them to the intended points.
7. Strip for kulisks stitch on short sides. Suppress the ironing allowances.
8. Fold the strip along the longitudinal sides.
9. Stitch the strip to the waist line on the markings, but leave the open area for embedding the gum.
10. Put the elastic band in the kuliska.
11. Adjust the length of the gum, grind the ends of the stitches "zigzag".
12. Open plot of land.
13. Along the center of the rubber band, place a fixing stitch, stretching the fabric.
14. Pull out the cake to the wrong side.
15. Fold the kulis by the allowance, pritachaite. Do not forget to leave the open area for embedding rubber bands.
16. Lay 3 kulisks each 1.5 cm wide.
17. Put rubber bands in the same length.
18. Grasp each elastic band on short sides.
19. Open the plot of land.
20. The allowances at the bottom of the dress and sleeves bend.
21. Delay the bottom of the dress and sleeves.

We hope that you liked our ideas. Now you can proudly wear a denim dress on a sunny spring day and conquer all those around you. Good luck!