How to glue an apron in the kitchen from plastic?

Nowadays, plastic is considered one of the most wear-resistant materials and can create competition even for glass and ceramics. No less popular steel and aprons for the kitchen, made on plastic basis, because such a method can transform the kitchen and several times improve its performance. About how to glue an apron in the kitchen from plastic, you will learn from this article.

to the contents ↑

Design tips:

• In order to strengthen the color balance in the room, experts recommend setting aprons for the kitchen, the color of which is contrasted with the rest of the furniture. If you combine different shades with interesting ornaments to suit the design of the room, you can very competently place the workplace.
• If bright colors can not be combined with the design of the room, it is possible to install a transparent plastic, installing a beautiful backlight behind the apron, which can visually increase the kitchen several times and cheer up the surrounding people.
• Kitchen apron made of plastic with photo printing will be an excellent option, because the price and quality will be ideally suited to each other, and installation of such an installation will be easy enough.

to the contents ↑

What are the kitchen aprons made of plastic?

Before you make an apron in the kitchen from plastic panels, you need to find out what types they share:

1. PVC panels - have a width of 10-50 cm, a length of 26, 27, 30 cm, and a thickness of 5-10 mm. Seams appear during the installation. If the installation is performed poorly, then gaps may form where the fat and unwanted liquid will soon fall. To avoid such problems, it is recommended to call a repairman - he will do his job at the highest level.
2. Sheet plastic panels. Such plastic eventually remains smooth and smooth, after its installation, no stitches remain. In this case, a panel of selected dimensions is cut from the whole fabric, which will soon be fastened to the wall.
3. Carbonate glass is the most durable type of plastic. Such a material is transparent, and its properties are very similar to the properties of the metal. To break such plastic is very difficult, and dents on it are almost not formed.

to the contents ↑

Advantages and disadvantages of the

plastic panels Many users are familiar with its positive and negative properties before fixing the apron for the kitchen from plastic. This helps to finally establish itself in its decision or think over alternative options.

To positive include:

• Low cost, if you compare this coating with other materials.
• Decent moisture resistance level.
• Resistance to temperature changes, except for direct fire.
• Resistant to aggressive chemical compounds.
• The bacteria can not reproduce on the surface of the plastic.
• To look after such a panel is very simple.
• Relatively light weight.
• You can install this design yourself.
• Easy dismantling.
• Tight fitting to the wall.

Of course, like any other finish, the plastic apron has several drawbacks:

• If it is located near the gas stove, an early plastic deformation is possible.
• With rigid brushes and abrasive chemical compounds such material can not be - scuffs and scratches can form.

Important! Wash this material with a sponge with a mild detergent.

to the contents ↑

Where to buy this apron?

Plastic is one of the cheapest and at the same time, the best quality finishing materials. For this reason, a large part of the population can glue an apron in the kitchen from plastic, because such an option is very budgetary. However, it should be noted that if you buy an apron, which will be photo-printed, be prepared for the fact that its cost will be higher even than the apron of other materials.

Few know where to order such an apron. You can buy it in construction shops, furniture fittings stores. Experienced consultants will give you professional help in choosing a wall apron, as well as tell you about the nuances of its installation.

Many sellers recommend buying aprons, which are produced by foreign manufacturers, referring to the fact that their products are better than ours.

Important! Before you buy and install the kitchen apron from the plastic house, you must ask the seller-consultant for a hygienic certificate for this type of material. This is necessary in order not to be deceived and not to buy a fake.

to the contents ↑

Attaching the apron to the wall

So, you bought the kind of apron you liked and are ready to proceed with further installation. Please note that it is necessary to glue such a coating at a time when the renovation of the room has not yet been completed. To begin with, a smooth wall must be primed and marked. After that, glue the panel itself, adhering to this algorithm:

• In the level it is necessary to outline the lines of the lower and upper edges of the panel.
• Make an apron.

Important! This installation should be in line with the lines that you have designed and closed with a table top and hanging lockers.

• "Liquid nails" should be applied to the material and press the apron against the wall to glue the plastic apron in the kitchen.
• It is better to fix the edges of the apron using self-tapping screws.
• If the plastic sections are open, they should be covered with decorative skirting boards( can be replaced with starting strips).
• Places of joints must be masked with slats that match the color.

Important! To establish such a beautiful element of the room is not so difficult, however, to remove it, you will have to move furniture. Adhesives often severely damage the material, making the plastic not so good and using it again will not make sense.

From this article you are convinced that it is not so difficult and cost-effective to give an attractive look to the working area in the kitchen, but also to learn how to make a kitchen apron from plastic panels yourself, saving considerably on the call of the master. Proper care and careful attitude to the material will ensure your long life.