How to wash the shower?

The installation of a shower instead of a full bath is becoming an increasingly popular solution, especially in small apartments. At first it pleases with its mirror shine and cleanliness, but in the process of exploitation appears a calcareous deposit and stains on the surface. In the device of the cabin a lot of materials are used, which have different properties, so the question arises how to wash the shower cabin and clean the plaque.

to the contents ↑

Cleaning the shower - types

If you regularly take care of the shower, remove limescale and soapy coating in time, then this job will not seem so difficult for you.

Regular cleaning

1. Thoroughly rinse all internal surfaces after each visit using hot water and then cold.
2. When deciding what to wash the shower to remove soapy deposits, use a dishwashing detergent.
3. Complete the cleaning procedure by wiping all surfaces with a dry, soft cloth.

Routine cleaning

The procedure for a more thorough cleaning should be carried out every two weeks using special means. If you do not know how to wash the shower, take note of the following recommendations:

1. With the formation of lime scale spray sprays used for washing glass and plastic surfaces will cope.
2. Use gels and creams designed to clean various plumbing fixtures.

Important! Give preference to the products of proven brands, then all the work will be faster, more efficient, and you do not have to rub hard and hard for the surface in order to restore to them the original appeal and purity.

How to wash the shower enclosure:

1. Apply prepared preparations to the walls and doors of the structure using a synthetic sponge.
2. If contamination is slight, rinse immediately. If I fly a few weeks, then leave the funds for 15-20 minutes.
3. Wash the dirt and preparation mixture using a scraper.
4. Rinse the cab clean water and wipe dry.

Important! Chemical agents apply only with hands protected with rubber gloves.

Intensive cleaning

Remove strong impurities, which usually occur on separate areas of the cabin, will help effective, potent drugs that are produced in the form of pastes or creams. The principle of their application is the same as described above. More detailed instructions are described in the section below.

The problematic areas include:

• area around the drain;
• nebulizer;
• cranes;
• sash doors.

Important! This method of how to wash the shower is used in case there is a strong lime deposit, mold or rust. Also can be used in case if plumbing has not been used for a long time.

to the contents ↑

How to choose the means for washing the shower?

In order not to damage the surfaces of this device, and also to cope with pollution, it is necessary to find out what materials it is made of. It is on this depends on the choice of means.

In general, the following materials are used in the manufacture:

• glass, plastic or polystyrene is used for the manufacture of walls, roofs and doors;
• ceramics, artificial or natural stone, acrylic, enamel surface - used in pallets, as well as in the decoration of one or more walls;
• chrome-plated steel is used to make a mixer, spray shower heads, in some cases for handles and door hinges;
• painted aluminum is used for manufacturing frames and guides.

Important! Regardless of the materials from which the plumbing and its components are made, do not use rough cleaning agents, as well as hard brushes, metal brushes.

to the contents ↑

How to wash the shower?

The following materials and means can be used for washing the booth:

• polyurethane or rubber scraper;
• soft cloth;
• synthetic sponge;
• toothbrush;
• cleaning sprays and gels;
• for glass and mirrors;
• citric acid, vinegar;
• atomizer;
• is a special steam cleaner.

After you have prepared the necessary tools, start cleaning:

1. Moisten the walls of the cubicle with warm water and apply a cleaning gel on the sponge.
2. Clean the shower from all sides - to remove dirt in hard-to-reach areas, use an old toothbrush.
3. Wash the doors from the inside, being in the middle of the booth.
4. Remove the detergent from the door with a scraper, which will remove even imperceptible dirt.
5. Thoroughly flush the product so that there are no stains on the surface.
6. To wash the shower from the lime scale and soapy divorce, use strong cream or pasty preparations. Apply funds to problem areas and after the indicated time on the packaging, rinse with running water.
7. To brighten the shower, moisten a soft towel with a liquid for glasses and mirrors and wipe it from all sides. Divorce will be permanently removed, and the walls will be protected from dust.

Important! If after applying strong means, stains still remain, use a weak( 5-10%) solution of vinegar or lemon juice. When the fungus booth appears on the walls, treat the problem areas with a mild chlorine solution, then rinse the surface with clean water and wipe dry. The room must be ventilated after the procedure.

to the contents ↑

Folk remedies against pollution

1. To clean glass, mirrors and taps, you can use the following solution: 1 tbsp.l.vodka and 2 tbsp.l.water. Moisten in this solution with a soft rag, wipe the contaminated surfaces, then wipe it dry.
2. To clean metal parts or an acrylic tray, use a regular toothpaste. Apply it to the desired area with a thin layer, then rinse with water.

Important! Toothpaste rinse off the surface immediately, otherwise you will have to wipe the dried tooth.

1. Vinegar will help you get rid of rust. Spray it from the spray gun to the surface, and after half an hour carefully wash it.
2. To the surface of the shower enclosure shine, use the following solution: 20 g of soda, 30 g of citric acid, mix in 1 tbsp.warm water. Pour the prepared product into a spray gun, shake well. Spray on the tile or the walls of the shower. Leave it on for 10 minutes, then rinse with water.

to the contents ↑

Useful advices:

1. Buy special acrylic bath cleaner if you have a plastic booth. For glass cabins - a tool for washing windows. Put them on the walls of the cabin during cleaning. Wash off after 10-15 minutes. In this way, you will prevent the occurrence of plaque, as well as prevent the formation of soap deposits. So - the problem is how to wash the shower, it will be much easier to solve each time.
2. Do not use powdered products, even if they are universal.
3. Use scrapers and brushes to prevent contamination of the shower. Due to the dense and soft fit, they perfectly remove the plaque even without special means. Use the scraper every time after taking a shower.
4. In order not to start a mold, regularly carry out prophylaxis: ventilate the bathroom, and apply after spraying on the sealant spray for showers. Keep the cabin doors slightly ajar so that excess moisture evaporates faster.
5. To solve the problem, than to wash the shower enclosure, do not use chemical solvents in order not to spoil the integrity of the coating, especially in the case of plastic walls and acrylic pallets.
6. Do not use aggressive and abrasive compounds like the "Toilet Duck" type. For plastic and acrylic, use special tools designed for them.
7. After using strong remedies, rinse the shower thoroughly, so that the remaining vapors do not lead to poisoning.
8. Thoroughly wipe all surfaces of plumbing dry to prevent the formation of a calcareous deposit, since the drops of water contain a large amount of calcium and chlorine.
9. Soap, toothpaste, shaving foam wash immediately after taking a shower.
10. Pay special attention to intertidal seams, which often become a cluster of bacteria.
11. Clean the interstitial spaces with cleaning powders and tile washing agents.
12. When using cleaning agents, make sure that they do not contain: formic acid, organic solvents( acetone, gasoline), formaldehyde.
13. To avoid unpleasant surprises, before use, carefully read the instructions for the shower enclosure and the detergents used. Some manufacturers recommend that before the first operation, apply to the entire surface of the shower cubicle a special composition that will facilitate future care, and also give the surface a water-repellent protection.

Cleaning the bathroom is not such a long and time consuming process, but it requires regularity. If you take care of the shower with all the recommendations, it will last you a long time.