How to clean the tile?

Tiles today are the best and most common option for covering the bathroom and kitchen. It would seem that such a cover is unpretentious and does not require special care. But to know how to clean the tile, so that it keeps its appearance and sparkles with purity, every mistress should know, because in fact everything is not so simple. In this article we will tell you how to wash the tiles immediately after laying them, and tell you how to care for this coating.

to the contents ↑

Than clean the tiles after laying?

Cleaning tiles in the bathroom or kitchen after repair is the main task of every mistress, after all, it's not easy to figure out how and how to wash it off from dust, mortars, glue and other building materials. Consider ways to clean it.

Remove grout and glue

With accurate and correct filling of seams problems with cleaning of the glue and grouting does not occur. Once the aggregate has partially solidified, the grout is rinsed with foam rubber and water. Immediately after drying, the residues formed on the surface of the coating must be removed with a dry, hard cloth.

Problems can occur with a rough surface. To clean it completely, you need to use a special cleaner, which the market provides a lot. Some of the most popular ones are:

1. Mapei Kerapoxy Cleaner - looks like a white powder. Easy to use. To remove residual grout and glue, a hard enough brush with a cleaner to rub the surface - the dirt will disappear. What is important - this tool does not change the color of the seam.
2. Keranet. The basis of this remedy is organic acid, which does not release toxic fumes. On sale there is a 15% solution with a capacity of 1 liter and 10 liters.
3. Santri - a product based on hydrochloric acid. It removes plaque from the tile well, but the colored stitches are white. Apply better with increased ventilation of the room, since the solution emits toxic fumes.

Clear traces of scotch

Often in stores, the torn packaging is tied with adhesive tape. Traces of it remain even after its packing. Remove the traces of the stay of Scotch tape will help you solvent nail polish. Also you can use the solvent "Gasoline Kalosha".

Removing cement

The residue of cement mortar on the tile causes great difficulties in cleaning it after repair. Than wash the solution off the tiles? Before answering this question, remember - the solution can be fresh or solidified. It depends on which means to choose:

1. If the cement mass is not yet completely frozen, and the quality of the solution itself is not very high, you can use the following method. Remove the spatula with any spatula, which you can and clean with a simple cleaning agent until it disappears.
2. If the cement is strong and has long been on the surface, try using a cleaner for cleaning the toilet bowls. It contains strong acids that corrode contamination. In order to wash the tile from the cement, soak the rag with this product and put it on for several hours for contamination, while periodically wetting it.

Important! You can also clean it with the help of special preparations, such as "SZOP", "Metalin OF-C".

Welding marks

A similar situation occurs when welding or a grinder is used near the tile coating. Sparks of red-hot metal do not just remain on the tile, but also burn in its surface depressions. To avoid this, it is recommended to close all possible areas of damage with plasterboard or wet cardboard before starting work. Adherent metal can be removed by concentrated acid.

Important! Use caution when working with acid - rubber gloves, room ventilation and a respirator are necessary. Unfortunately, the acid removes only frozen metal droplets, dents on the tile and will remain.

Traces of aluminum

Such traces most often occur when stacking. The aluminum rule by which the surface is checked leaves gray stripes that are particularly noticeable on a light tile. The same staircase can leave a staircase.

As in the previous case, pollution from aluminum is easier to prevent than clean. To remove the same traces of a concentrated acid or rust solvent will help you.

to the table of contents ↑

Tile care

Surfaces covered with tiles in the bathroom and in the kitchen are especially prone to various kinds of soiling - soapy deposits, grease and much more. The modern market offers many chemical cleaners to clean the tile from this kind of dirt. Also there are long proven folk methods, with the help of which the task of how to wash the tile is solved quite easily. How to give preference - decide for yourself after acquaintance with the principle of their application and price.

Household chemical products

In hardware stores you will find a huge selection of cleaning agents for tiles. The form of release at them different - from powders to kremoobraznyh and liquid agents.

Recommendations for choosing the tools:

1. To gently clean the tile, we recommend using cream and liquid, as powdered cleaners can damage the surface, leaving scratches on it.
   To purify the pollution more serious, you can use chlorine-containing products, they have an additional disinfectant effect.
2. If you do not have the right tools for the tile, you can use the window cleaner.

Important! It is better to wash the tile from the top, and wipe it, vice versa from the bottom.

to the contents ↑

Folk remedies

The reasons why you can not use household chemicals at home can be many, but the result is always the same - you have to look for an alternative. And then time-tested, popular means will come to the rescue. Consider several "recipes" for such options.

Ammonium alcohol

1. Prepare a solution of ammonia, taking into account 2 liters of water and 1 tbsp.l.ammonia.
2. Take the spray gun or just wet the rag.
3. Apply this solution to the tile.
4. After 5 minutes, wipe the surface with a damp cloth and wipe dry.

Important! Your cover will shine again. As a substitute for ammonia, vinegar can be used.

Lemon juice

A good remedy for the removal of limestone deposits:

1. Soak the sponge with juice and apply it on the stains.
2. Leave for a few minutes.
3. After the time has elapsed, wipe until the stain disappears.

Important! Instead of lemon juice you can use warmed vinegar.

Soda

Perfect for removing stains of fat. The procedure is as follows:

1. Add water to a half cup of soda to make a mushy substance.
2. Use a sponge to clean the dirt obtained by the paste.
3. With plenty of water and a soft cloth, wash off the remaining soda.
4. Dry the tile.

to the table of contents ↑

Cleaning the tiles in the bathroom

Special attention should be paid to the question "how to clean the tile in the bathroom?".After all, this room has the most direct relation to our hygiene. To ensure that your bathtub shines with cleanliness and freshness, you need to clean it regularly.

For this, prepare: rubber gloves, soap solution, liquid ammonia solution or vinegar, napkin from wool or felt, any remedy for mold, soft sponge and toothbrush.

Then follow these steps step by step:

1. Start cleaning the cover with a soap solution. If the surface is heavily soiled, it is worth wiping it with a sponge soaked in a solution of ammonia.
2. Degrease the seams from soapy foam - use ammonia for this.
3. Apply a disinfectant to the cleaned seams. For this, a small amount of the drug is dissolved in water and treat the space between the tiles. Make it easy for yourself using a toothbrush.
4. Apply a vacuum cleaner and detergent to the floor. Do this as often as possible, because on this surface, most of the dirt accumulates.
5. Wipe the tile dry with a wool or felt cloth.

As you can see, cleaning the tiles in the bathroom is not such a complicated matter, especially if you do it regularly.

to the contents ↑

Useful advices:

1. Use household chemicals as little as possible, as the components contained in them can damage your coating irrevocably.
2. In household chemical shops you can always purchase a special brush for cleaning seams.

With our simple tips and techniques you can give freshness and shine to your tile and the question of how to wash the tiles from difficult soiling will not touch you any more.