How to remove the plaque in the bathroom?

• Causes of
• Traditional remedies against calcareous deposits
• Chemicals for removing limescale
• Application of products depending on surface
• Yellow coating in bath
• Precautions
• Prevention
• Useful advices:

Water hardness creates many difficulties for housewives, amongwhich are annoying lime plaque in the bathroom and on other surfaces that come into contact with water. It appears gradually as a result of the settling of insoluble magnesium and calcium compounds contained in tap water, and it is rather difficult to wash it.

As a result - the glossy and snow-white surface of the sanitary equipment is covered with a layer of beige substance, which makes it matte and it becomes difficult to clean it. And the presence of rust in the water pipe can further complicate the problem of how to remove the plaque in the bathroom, completely ruining the appearance of the bathroom with reddish smudges.

There are many methods to deal with such types of pollution. But which one is better to apply in your case to effectively clean the surface, will depend on the list of individual factors that need to be considered when choosing.

Reasons for

Let's look at the details of the raid and the reasons for its appearance:

Plaque on the plumber

Because plumbing products often and actively interact with water, limescale is very quickly formed on them. In the water that flows through our sewer pipes, full of lime and various minerals. After the water gets to the surface and evaporates, lumps of lime form in its place. At first they are hardly noticeable, but as the number of particles grows, the thickness of the plaque increases.

Important! Lime stone can appear as on the toilet, in which the drain tank flows, and on the bathroom, on the faucets, on the pipes. In addition, that it spoils the appearance of the product, it also hinders the process of its operation.

Scale on the walls

When we talk about the plaque that is present on the walls of the bathroom, we mean a soapy coating, formed not only on the tile, but also on the surfaces of PVC panels, lining. When hot water is mixed with detergent, it settles on the walls in the form of water vapor and leaves a thin soapy coating on them, which can be easily eliminated at first. But over time, it becomes increasingly difficult to clear it.

Fungic coating

High humidity in the room promotes the active development of various fungi, which, as a rule, can be found on the joints between the wall and the bathroom, on the seams between the tiles and in places difficult to clean.

Important! Such a plaque not only spoils the appearance, but is also extremely harmful to health. Therefore, it must be combated with antibacterial means.

Tapping on the cranes

Since most modern homes today use nickel-plated faucets and mixers, any divorces on them are immediately noticeable. If they are not constantly cleaned, then they form a calcareous and soapy coating.

Important! If the tap gives a leak, then you may also encounter a rust problem. Clear it is most difficult. Also rust from the tap is able to color and other non-metallic surfaces, for example, the bottom of the bathroom or the sink. Therefore, the fight against rust must be started on time.

Popular means in the fight against limescale

To effectively clean the plaque in the bathroom, you can use one of the proven folk remedies, namely:

• Acetic acid concentration of at least 25% - you should prepare the solution by mixing the acid with water in the ratio1:20.It is best to dilute it with steep boiling water, and then allow the solution to cool.

Important! This solution can remove plaque on metallized, glass, enamel, nickel and faience surfaces. But for use on plastic and acrylic baths it will not work.

• Citric acid cleans the surface more delicately, so it can be used for any materials. To acid produced the desired effect, it should be applied with a sponge on all surfaces that need cleaning, for up to 3 hours. After this, it must be washed off with warm water.
• Oxalic acid is often used in many purchased cleaning products. If you would like to find a softer way of cleaning, then you can independently prepare the solution from water, which is mixed with oxalic acid( as a rule, 5% solution is used), apply it to the contaminated surface for a couple of hours.
• Hydrochloric acid can also be used in the control of lime scale - there should be maximum caution. Under no circumstances should you allow hydrochloric acid to get on the skin, and also on the surface of the metal. But it is great for removing rust from enamel surfaces. After applying hydrochloric acid, the surface should be thoroughly rinsed with cold running water and treated with a usual detergent.
• A mixture of hydrogen peroxide and ammonia is a less dangerous way to clean the plaque in the bathroom. Mix hydrogen peroxide with ammonia at a ratio of 1: 2 in a separate container, apply the mixture on a sponge and wipe with it the soiled areas. After 15 minutes rinse the product.
• Some landladies recommend baking soda for eliminating the plaque - but with this tool it is necessary to act cautiously, since abrasive particles can scratch the surface.

Chemicals for removing lime scale

Removing water stone in the bathroom with chemicals is much easier and faster. You do not need to measure the necessary proportions and mix the solutions yourself. All the required components in the purchased cleaning products have already been used. You just need to apply a cleanser to a cloth, wipe it with a dirty surface and wash off any remaining plaque with plain water.

Chemical detergents can be purchased as a spray, powder or gel. On the shelves of shops you can find the following:

• Frosch.
• Sano Anti Kalk Rush.
• Clin.
• Cillit Bang.
• Cif.
• HG.

Before buying, be sure to carefully read the information on the label. It should indicate not only the method of application, but also the cleaning of which surfaces this product is intended. So, for example, for acrylic baths you can not use abrasive powders and cleaners that contain acids in their composition.

Important! The more concentrated the cleaning agent, the less time it will need to be kept on the contaminated surface. This time interval can range from a couple of minutes to several hours.

If you need to remove an old raid, then one time you will hardly get the desired effect. The cleaning procedure must be carried out several times before the deposit is completely washed away.

Application of the products depending on the surface

The type and material of the surface on which the coating has appeared will largely depend on how the plaque can be cleaned in the bathroom:

• The most undemanding product made of cast iron - they can be processed practicallyby any means, except strong acids, for example, hydrochloric acid.
• Chromed and enameled surfaces can not be cleaned with powders and other abrasive agents that can disrupt the integrity of the coating - they should be cleaned with various aqueous solutions, sprays, gels and other liquid preparations. This also applies to porcelain and glass products. Eliminate the raid on the enamel and return it to whiteness will also help bleach.
• Acrylic bath requires the most careful treatment - it can be cleaned only with the help of natural acids or specialized means for washing surfaces from acrylic. After treating the acrylic surface with acid solutions, experts recommend neutralizing its effect with any alkaline detergent.

Yellow coating in the bath

Water flowing from our faucets often contains iron impurities. As a rule, after its drying in the bathroom and in the sink there are yellow spots of rust. To prevent their formation, bleach should be used regularly.

If the rust stains are too noticeable and the simple bleach does not cope with them, you will be helped by the following:

1. Prepare 50 g of vinegar, 50 g of bleach and 2 tablespoons of food and soda ash.
2. Initially, apply a mixture of calcined and baking soda to the wet surface, which must be rubbed in smooth circular motions, for 10 minutes.
3. Then mix the mixture of vinegar and bleach on top and leave for 30 minutes.
4. At the end, simply flush the surface with running water.

Precautions

In order not to happen, as in the whole well-known proverb "wanted as best, but it turned out as always", before cleaning in the bathroom, you should carefully read the instructions on the detergent package. If you use it for the first time, then it is better to try it on a small, inconspicuous area first, and not immediately to process the whole bath.

Important! In order to remove the plaque in the bathroom, it is undesirable to use hard metal brushes that are capable of scratching the surface. It is better to resort to the help of sponges and soft rags. In extreme cases - brushes with soft bristles.

Prevention

In the fight against limescale, the main thing is preventive measures:

• The more often you perform the procedures of washing the bathroom, the less likely it is that you will have to deal with the problem of stale plaque.
• As a prophylaxis in the fight against plaque, it is not necessary to use strong remedies. For these purposes, the usual powder, liquid for washing dishes, liquid soap - in general, everything that you can find in your home.
• If you are too lazy to wash off detergents after application, use a liquid for washing glasses. As a rule, they are made on the basis of alcohol, so these products instantly evaporate, and all the dirt stays on the rag.

Important! To effectively combat mold and fungus, treat the bath with chlorine-containing detergents or simply weak solutions of whiteness or bleach at least once a week. However, remember that you can not mix chlorine with acids at the same time, because in this case, chlorine vapor becomes poisonous.

Useful advices:

• The enameled bath which has undergone restoration, care equals acrylic, because the enamel, which was applied outside the factory conditions, did not pass the hardening. Therefore, such a bath requires gentle and gentle care.
• If you have chosen a powder to remove the plaque in the bath, it is better not to fill it in an empty bath - the product "hits" heavily in the nose, which is very bad for health. To protect yourself, it is better to collect a small amount of water in the bath, pour the remedy into it and rub the soiled areas with a gruel, and then wash it off with water.
• Removing lime stone is necessary not only from the bath itself and the faucets, but also to monitor the state of the shower inside. To do this, it is recommended to unscrew the shower head and pour in a weak solution of acetic acid. Then screw the head back and leave for a couple of hours. After a while, just open the water so that the limescale is removed.

As you can see, there are a lot of ways to remove the plaque in the bathroom. What is better to choose - a ready-made product from the store or to resort to folk recipes, decide for yourself, most importantly - always read the instructions on the package and observe the precautionary measures.