How to clean a bath at home using soda and vinegar?

Clean the bathroom should be ideal. But very often, regardless of the frequency of use and accuracy of the owners, the plumbing loses its former beauty and becomes covered with ugly spots. How to clean a bath at home using soda and vinegar? This and some other effective methods of cleaning the sanitary ware are told in our article. Applying simple and effective advice in practice, your bath will again acquire a pristine appearance.

to the contents ↑

Causes of bath contamination and solutions to the problem

Over time, even the most expensive and quality plumbing loses its luster and snow-white cleanliness. Lime scale settles on surfaces several times faster from frequent showering. What can I say about taking a bath. Low-quality water, lack of proper care for plumbing, long life are one of the main reasons for the contamination of the bath. Agree that unattractive rusty stains, plaque on the surface, the faded color of plumbing not only spoil the reputation of the owners, but also give rise to doubt the sanitation of the whole house.

In order to solve this problem, there are several options:

• Replace all plumbing new;
• Give to the masters for restoration;
• Clean the bath with soda and vinegar;
• Use special household chemical products.

To date, the department of household chemicals has a huge range of products, with which, if you believe the packaging, you can easily cope with any pollution - plaque, rust, divorce from soap and so on. But very few people know and apply the old time-tested method - to wash the bath of yellow plaque at home with soda and vinegar. A remedy made from these ingredients can restore shine, cleanliness of even too polluted plumbing. It is about this version of cleaning that we'll talk about later.

to the contents ↑

How to clean the bath with soda?

Plumbing, like all other interior items, needs constant care - this is one of the most important conditions for maintaining cleanliness, hygiene in the house. For cleaning, there is no need to purchase expensive liquids, which in the composition have corrosive and abrasive substances. At home, the bath can be cleaned with ordinary or soda ash.

Advantages of cleaning the soda bath:

• Soda perfectly removes fresh traces of rust and plaque.
• The product can be safely used on products with enamel coating.
• The substance is an excellent antiseptic. By treating them with a surface, you can easily eliminate harmful microorganisms, an unpleasant odor, prevent the formation of fungus.
• Periodic cleaning of sanitary ware with soda will reduce the time for cleaning, save the family budget and will not harm your health.
• Sodium bicarbonate is harmless and does not cause allergies, does not leave burns on contact with human skin.

Important! To ensure complete safety, rubber gloves are still worth putting on during cleaning.

Cleaning method:

1. Clean contaminated surface with a small amount of soda.
2. Use a hard brush to thoroughly disinfect the product.
3. Leave the remedy for better exposure for 1-1.5 hours.
4. After the time has elapsed, wash away the soda with warm water.
5. For better and more efficient surface cleaning, use citric acid. Dilute it with water in the proportion of 0.5 liters of water 1 tablespoon of acid.
6. First apply soda, rub with a brush, after 10-20 minutes, wipe the surface with a solution of citric acid.
7. Leave the device on for another 30 minutes, at the end of it, rinse thoroughly with warm water.

to the contents ↑

How to clean the bath with vinegar?

With the problem of plaque and rusty formations on the surface of the bath, vinegar is also effective - a product that is always at hand in every home. Applying vinegar for cast-iron baths, light movement restores the gloss of sanitary ware, removes pollution of varying complexity.

Method of treatment:

1. Wet off small areas of the surface with liquid - the occupation is rather tedious and time-consuming. To speed up the process, you need to moisten the napkins of large size and cover them with the entire bath inside.
2. Leave for better effect for 2-3 hours.
3. After the time has elapsed, remove the napkins and rinse thoroughly with warm water.

to the contents ↑

How to clean rusty stains on bathroom vinegar?

The appearance of rusty formations on the bathroom mostly depends on the condition of our sewerage system. Water, passing through the old pipes, leaves on the surface imperceptible traces, which over time make a new bath in the old and not aesthetic plumbing. With a solution of vinegar, you can get rid of stale rusty stains.

Cleaning Option 1:

1. Vinegar is heated in a frying pan with table salt to a temperature of 50 degrees.
2. Use a sponge or brush to apply a small amount of rust.
3. Allow to stand for 30 minutes.
4. At the end, wipe the treated area with a damp cloth.

Cleaning option No.2

1. Fill the bath with hot water. To the level of formed contaminants.
2. Pour approximately 600 ml of 9% vinegar into the water.
3. Leave water and vinegar for 4 hours.
4. In the end, clean thoroughly with a brush and rinse with water.

Important! To keep the plumbing longer shine and clean, wipe it with vinegar after each bath. After this treatment, rinse surfaces with cold water.

to the contents ↑

How to clean the bath with soda ash?

The properties of soda ash are significantly different from ordinary soda, which we use for cooking or cleaning not severe contaminants. Calcined soda has an increased alkaline balance. In domestic life it is used for washing and removing more persistent stains and old defects.

Important! Raw materials, in contrast to baking soda, is a strong cleaning agent, so when working with it, always wear protective gloves, and also take precautions.

There are a large number of liquid preparation recipes to wash the bath with soda ash, which are easy to prepare at home. The result after the cleaning will delight you, and for the preparation of the product all the necessary components you can easily find in the home.

Method number 1

You will need:

• Household soap( grated or shredded).Calcined and baking soda.
• Ammonium alcohol.

Cleaning sequence:

1. Mix in a small container in a 1: 1 ratio a mixture of soap and soda.
2. Add 3-5 drops of ammonia.
3. Fill with water and mix thoroughly until all ingredients completely dissolve.
4. The treated composition treat the contaminated areas.
5. Leave the remedy for 2 hours.
6. In the end, rinse with plenty of running water.

Method number 2

The second method involves the use of household soda in combination with vinegar. So, how to clean the bath with soda ash and vinegar?

You will need:

• Soda food and calcined.
• Bleach.
• Table vinegar 9%.

Processing sequence:

• In a small container, mix food and soda ash in equal parts.
• Add as much bleach and table vinegar to this container. Stir well until a uniform mixture is formed.
• Next, the gruel is applied to the contaminated area of ​​the bath, left on the surface for 20 minutes.

Important! To achieve a more rapid and qualitative result, the stains are treated with a solution of bleach and vinegar and left for another 30 minutes.

• In the end, thoroughly clean the treated area with a brush and rinse the remainder of the substance with warm water.

Option No. 3

The bleach is added during the washing process in order to enhance the effect of the powder. In our case, in order to enhance the action of food or soda ash, it is also necessary to use bleach. To prepare the next tool you will need:

• "Whiteness".Calcined soda.

Cleaning sequence:

• First of all, we clean the bath with soda, then we apply bleach on the cleaned surface and leave it for 20-30 minutes.

Important! At the end of time, the bath will be washed off from the visible rusty stains and the enamel will again acquire whiteness.

• In the end, rinse the bath thoroughly with cold running water.

Important! Apply this method of cleaning is not recommended more than 2-3 times a month."Whiteness" in its composition is a chemical - the liquids released by the liquid are very harmful to health.

to the contents ↑

Recommendations for bath care

To avoid further problems and not to find options on how to clean the bath at home with soda, vinegar or bleach, we recommend remembering some practical tips for bath care:

• After each bathor shower rinse the bath with warm water and wipe dry with a towel.

Important! Make sure that all family members adhere to this rule.

• To avoid the appearance of rusty stains and plaque on the surface, wash it as it gets soiled.
• Washing the bath is recommended no more than 4 times a month. Products made of acrylic should be washed no more than 1 time per month.

Important! Applying household cleaning chemicals, strictly follow the instructions on the package, otherwise - you can damage such a delicate surface.

• In the household chemistry department, purchase funds specifically designed for a particular type of bath.
• Plumbing with enamelled coating is strictly prohibited from cleaning with metal brushes, and also processed with agents containing acids.

Important! These components destroy the coating and, unfortunately, it will not be possible to restore it.

• Manufacturers do not recommend acrylic coating of baths with abrasive substances, such as baking soda and washing powder, alcohol-containing liquids, gasoline, acetone, as well as liquids with chlorine content, too, should be excluded.

Timely care of the bathroom will preserve the original brilliance and novelty of all the details, as well as extend the period of their operation. Use the recommendations from the article to clean the bath with calcined soda and vinegar, and your plumbing will long be shining with cleanliness, and taking a bath will bring real pleasure.