How to clean a mirror in the bathroom from a raid?

Mirrors reflect us, our beauty, shortcomings, all the surrounding space. Therefore, you probably would not want to see yourself as distorted, dirty, stained, or whatever. Glasses from time to time get dirty, they accumulate everything that ever fell on them, and, of course, they eventually become worthless. And in order to extend their service time, you need to know the rules of care and recommendations, how to clean the mirror in the bathroom from the plaque. You will find this information in this article.

to the contents ↑

The basic wishes for the placement of mirrors:

1. Mirrors are often placed close to a light source. This is one of the main errors - only the objects to be reflected should be illuminated. If there are direct rays to the surface, there is a possibility that the mirror can fade.
2. Amalgam also breaks under the influence of high temperatures. Its destruction begins with the edges of the stain, which can be masked with the help of glued foil to the back side of the surface.

Important! Also you can paint the reverse side of the product with oil paint. This is a fairly effective way to restore mirror coverage.

to the contents ↑

The main sources of dirt on the glass

Before you clean the mirror of the plaque, you need to understand what you can deal with. Most often the main sources of pollution are:

• dust;
• cigarette smoke;
• fingerprints;
• condensate;
• stains;
• plaque lime from water.

to the contents ↑

Cleaning steps

Standard maintenance procedures for the mirror are:

1. Remove dust with a soft cloth.
2. Spray cleaning agent.
3. Polishing with a rag or paper.

Important! If you perform these procedures once a day or two, you will not need to use any specific cleansing agents.

to the contents ↑

Preparing to clean the mirror

Before you do a good cleaning of the mirror, you need to prepare the glass, that is, to clear the residue of fats, traces, dirt. Here is a clear example of the preparation of glass for cleaning:

1. The sponge is wetted with water, the dish cleaner is applied and foamed.
2. The mirror is rubbed against the back of the sponge( do not use abrasive elements - they can damage the glass).
3. The detergent is removed with a sponge or microfibre cloth.

Important! If suddenly there are dried droplets of grease on the glass or any other stale dirt, it can be carefully removed with a sharp blade from a razor or knife. After - the surface must be wiped with a soft cloth.

In case of extensive contamination, a dishwashing or paste powder is ideal. The product is applied to the sponge and moistened until a paste is formed.

Important! If you do not have a cleaning agent at your fingertips, boiled water and ammonia can be used as an alternative solution. The solution is placed in a spray gun, applied to a mirror, and then wiped with a cloth.

After you have removed everything, you need to apply warm water to the mirror - ideally boiled, applied using a rag or a sponge.

to the table of contents ↑

Care and cleaning of mirrors

Since you already know that the glass surface problems can have different origins, we will deal with each of them separately.

The swamped glass

What should be done in order to less fog the window, consider the example:

1. Cover the front of the mirror with a gelatin solution in the proportion of 1 teaspoon per 50 ml of water.
2. Allow the solution to swell and preheat in a water bath.
3. Cool.

That's the whole way to protect the glass from fogging.

Important! Alternatively, you can use a special product for automotive glass, which, in turn, helps to prevent fogging.

Replacing Chemistry

Many are wondering how not to leave a divorce? Clear the mirror in the bathroom from the plaque and do not leave the divorce is not so difficult.

Most of the glass care products contain many chemical elements that can damage the glass. Here is the replacement of chemicals by folk:

• black tea;
• warm water with the addition of blue;
• alcohol diluted in water;
• ammonia diluted with water.

Remove stains

Strange as it may seem, but the stains can "eat up" even with a perfectly smooth glass surface. To clean the mirror in the bathroom from the plaque, irrespective of whether it is lime from water or something else, use the following improvised means:

• With stubborn dirt, the onion helps. It is necessary to rub the surface with an onion, rinse it with hot water and wipe it with a soft and dry rag.
• Also be sure to try a solution of vinegar and chalk. To do this, dilute in proportions 1 to 1 vinegar and chalk in 500 ml of hot water. Allow the liquid to stand and rub the mirror with a soft cloth.
• Lemon juice - a mirror just shine. You need to sprinkle it and leave it for 10 minutes. Then carefully rub the surface with a cloth.

Important! The citric acid powder, diluted in water, can easily wash out old, badly washed away stains.

• The usual potato will do fine. Take half of the raw potatoes and rub it with a mirror. Then you need to rinse with water and wipe dry.
• At the end of the procedure, the surface should be radiant and shiny. The perfect remedy is milk. It is moistened cotton fabric and polish the mirror.
• You can return the original surface to the mirror surface using blue. Make a weak solution of it, slightly moistened with a rag in it, which should be just wet, and not wet, wipe the mirror. It will only be wiped dry with a dry cloth.
• Alcohol-containing solutions are good at this task - here we will use vodka. Try the following solution: add 10 parts of vodka for 10 hours of water, wipe the mirror with this solution using a soft, lint-free cloth.

Important! In order not to leave a divorce, the surface should be wiped dry with a crumpled newspaper.

Forgetting to look after mirrors, you put the problems in a long drawer. In addition to the main interior, do not forget about the glass, because the dirty glass will look ugly against a perfectly clean apartment. And who wants to be ahead of time spent on a thing, if with due care, it will still serve a sufficient amount of time. Most importantly - do not forget that you need to do this cyclically, and by applying all these simple methods, you will achieve the ideal reflection in the glass.