The awkward handling of office equipment is fraught with the appearance of stubborn stains on the hands, upholstery of furniture and clothing. Knowing how to erase the corrector and what means at what pollution it is necessary to apply, it is possible to prevent permanent damage of products and formation of faded areas. The purification process will not be a big problem if the composition of the corrective product is correctly evaluated.
A fresh touch can be easily removed while it is fresh. You just need to wipe the problem area with moist alcohol wipes and at the first opportunity to send the garment to the wash. The dried out corrector is not easy to get out. It forms a dense film on the fabric, which has to be affected by chemical reagents.
Features of the approach to corrective agents on water, alcohol and emulsion
Before you wash the putty, you need to carefully read its composition. It is the component that is the base of the product and will tell which reagent will be most useful in a particular case:
- The water stroke will not cause any problems. The soiled clothes before washing are simply soaked for a while in cold water. When dealing with the stroke in the form of tape, you need to add a little detergent or detergent to the water.
Council
It is strictly forbidden to rub the water-based stroke, it will only penetrate deeper and it will be difficult to remove it in the traditional way. The stains are washed completely only if the thing passes through the soaking stage.
- To remove traces from the corrector on an alcohol or emulsion basis, you will have to wedge the wedge with a wedge. In this case, pure alcohol, vodka or alcohol tonic is useful. The cotton disc is wetted in the chosen product, we blot the stain to a good impregnation and begin to remove by soft surface movements. If necessary, the approach can be repeated, but it is necessary to act carefully. With colored clothing, such manipulations can wash out the brightness of the color and even lead to a slight destruction of the fibers. Things from delicate fabrics, which got a stroke, it is better to entrust to professionals.
If the stain is very old, bulky or deep, you can first try to wipe it with a blunt knife. The traditional washing will help to completely remove the remnants of the contamination.
Solvent-based detergent remover
The most complex type of contamination, where the use of water at the initial stage is strictly prohibited. Remove white spots can be with acetone, nail polish remover and other similar solvents.
The selected product must first be checked on a hidden tissue site to avoid unexpected unpleasant consequences.
- First the stroke to the maximum is wiped off with a soft brush. This method is used only if the composition is already withered and can not spread over a large area.
- Then the product is turned out with the wrong side out. It is possible to influence the solvent only on the reverse side of the tissue, this will reduce the aggressive effect of the chemical to a minimum.
- Under the back of the stain, place an unnecessary patch of soft tissue.
- The cotton disc is wetted in the chosen solvent and we begin to process the stain in successive methodical movements. We work in one direction, otherwise the composition will simply be smeared in different directions.
- If the corrector could not be completely removed, we erase the thing manually. We use warm water and a little detergent. After obtaining the desired result, we run the product once in the washing machine.
A good result is the professional stain removers. They also need to be selected based on the origin of the corrector and the quality of the material affected.
These methods are not suitable for processing silk, wool, velvet and other fleecy fabrics. In case of contamination of such surfaces, it is necessary to turn to dry cleaners as soon as possible and before that you should not try to remove the formulations on your own. It can only pin a spot.
