How to wash jeans in a typewriter machine, so as not to spoil the product?

Hand washing of jeans can take away all the strength, because you have to have a very dense and uncompromising material. Since washing machines of the automatic device have got in an easy approach, procedure of cleaning of jeans has considerably become simpler.

In theory, you only need to install the necessary parameters on the device and load things, everything else will be done by the smart assembly itself. However, in practice everything is a bit more complicated. If you handle products in the wrong mode or too high a temperature, you may encounter problems such as discoloration or severe shrinkage of the fabric.

How to prepare jeans before downloading?

Prevention of negative side effects begins before the washing machine is loaded. It is necessary to ensure that the following conditions are met:

1. The jeans are only wiped out in the machine with the machine turned in the wrong direction. In addition, it is necessary to check all pockets for the presence of objects, otherwise there is a risk of damage to the matter.
2. You need to select the correct mode. The best option is to install a program for jeans. If this is not provided in the washing machine, you must choose a delicate or manual effect.
3. It is strictly forbidden to soak things before washing, especially covered with metallic decorative ornaments. If there is a stain on the surface of the product, then the special compound is applied only to it. If you need soaking, you will have to do manual washing.
4. Given the special texture of the fabric, jeans are best washed with liquid detergents, not powders. They are washed without problems when rinsing and do not leave a divorce. In addition to the standard formulations, it is recommended to add preparations that stabilize the color of matter.

Model jeans with multiple rivets, fringe, beads, rhinestones and zippers will be correctly pre-placed in a bag. This will save not only the original hardware, but also prevent damage to the drum, clogging out the hoses. Particular care should be exercised in the presence of protruding threads, they can break off, clogging the functional holes.

Setting the optimum parameters for washing and drying

When setting parameters on the washing machine, it should be taken into account that the following are considered optimal conditions for treating jeans:

• The treatment is best performed at a temperature of no higher than 40 ° C.This will prevent deformation of the product and activate the necessary enzymes in the composition of the liquid powder. Pants with embroidery or applique present are not recommended to be kept in water, the temperature of which exceeds 30ºС.The number of revolutions should not exceed 800 units.
• Jeans of denim in the machine, the machine can not be dried, they can sit down too much, even if all other parameters are observed. Clean the product should be held at room temperature and pat in a still wet condition.

Advice: Denim should not be dried in the sun or using artificial heat sources. From this fabric coarsens, it is more difficult to iron, and even to the touch it becomes less pleasant, as usual. Plus, direct sunlight leads to a tarnishing of the color of the product.

• Whichever type of denim fabric is processed, it is best to turn off the spinning or set to the minimum value. Automatic mode and so seat the fibers, the use of spin can irretrievably reduce the size of the thing.
• Quality jeans of leading brands do not shed, so they are allowed to be washed with other things, but only if all the parameters are set correctly.

The listed recommendations are considered standard, but before the first wash, you must without fail read the recommendations on the product labels. If there are any additives in the composition of the denim fabric, the processing conditions can significantly change. Some items are generally not allowed to be washed in the machine, they are only hand-held or even dry-cleaned.

Important nuances of the process, which can not be ignored

It is not enough to erase the capricious products correctly. After they are removed from the drum, several manipulations must be carried out to extend the life of the garments:

1. After the machine has been in use, any jeans are heavily seated, so they need to be slightly stretched still in the wet state. Act better by hand, if you simply put the product on the body, there is a risk of deformation of the tissue in the knees, buttocks and calves. It is better to slightly pull the fabric in the sides, taking hold of the areas with seams.
2. Do not forget about leather inserts, from regular washing they wear out and lose their original appeal. After removal from the machine, the elements must be wiped with glycerin, and then sanded with a soft cloth.
3. Metal elements also need care. After each treatment, it is recommended to wipe them with a cloth flap soaked in a weak solution of vinegar. This will prevent oxidation of the metal, the appearance of plaque, darkening of the fabric around the rivets. Also need to handle and "lightning", then it will last longer.

Specific tissue needs appropriate care. Only with the creation of such conditions can we expect that such a favorite and comfortable product will last several years without losing its original appeal and practicality.

And also read the article on how to wash jeans by hand