How to remove film from plastic windows without traces and other troubles?

. The appearance in the house of something new is always a joy for the owners,features if this "new" long waited, thought through and saved money. Installation of modern windows, unfortunately, is not only a joy, but also a question: how to remove film from plastic windows? You need to solve it as soon as possible. And why, in fact, need to be in such a hurry?

Why do I need to hurry?

The film, which is glued in the installation of plastic windows, is designed to protect the surface of window frames from scratches and minor damage during transportation and installation. Agree, everything happens, and excessive precautionary measures do not interfere. But the problem is that the glue on which the film is held has not the most successful physicochemical properties and under the influence of direct sunlight for a long period( more than two to three months of inactivity of the hosts) becomes viscous, difficult to remove. To our great regret, many happy owners of plastic windows do not know this property and eventually get a problem in the form of difficulties with the film. Today, we will analyze the options for helping those who are in such an unpleasant situation.

We will try to remove the film with a construction hair dryer

It would seem that a construction hair dryer is not so common, but with its help you can easily remove the old protective film, so annoying the weary look of the owners. The only nuance is: the hair dryer needs to be able to control, and the air stream should be directed to the film, and not to the glass unit. There is a risk that windows will deform from a sharp temperature drop, and the glass unit will burst. So, the flow of warm air is directed to the film, it starts to dissolve and is easily removed together with the adhesive layer.

We use a specialized scraper

The next item that should be tried as a cleaning tool is a professional scraper for cleaning glass ceramic and plastic surfaces. It can be purchased at a hardware store or in large network hypermarkets, it costs a little. When using such a scraper does not require the use of any special means, except that you can try to melt the ordinary glue with an ordinary hair dryer, which is almost everyone in the house. But it will certainly be superfluous: the scraper will handle everything, unless its task is to remove a very very old film on the same old windows.

An ordinary eraser can also help

If the film turned out to be torn off with your own hands, but it left glue marks, you can try to get rid of them using the simplest eraser. Yes, it may seem strange, but the eraser very often easily turns glue spots into small spools, which are easily removed from the surface. By the way, this applies not only to the protective film, but also everything else, the basis of which is the adhesive: electrical tape, adhesive tape, decorative films and other items. So, the eraser is another hero helping to clean the glue.

If safe means do not help. ..

Unfortunately, it is not always possible to clean the film and glue from it using simple and safe means. In such cases, alas, one has to resort to the help of solvents( "White Spirit" and the like, you can even weaker).

Advice

It is very important to observe precautions: remove the protective film, of course, it's good, but your health is more important. Therefore, do not forget to ensure the flow of fresh air when working with chemicals, and also protect the respiratory tract with a respirator. In addition, the solvent may well spoil the appearance of the window, and the situation can be rectified only by painting, and it is not always possible.

In order for the product to work, it does not need to be applied to the film itself. It takes a little to pick up the protective coating, find a free spot and there already in an accessible way to start the solvent. Then wait a bit, and then - check the result by trying to tear off the protective film.

Consult the services of the clerk if you are afraid of damaging the windows

If the owners are afraid that after cleaning the windows will lose beauty and charm, you can safely turn to a cleaning company that will send specially trained people, and they will, in turn, carry outwork neatly. .. and if not - will be forced to pay compensation. Alas, this method is not affordable for everyone, but it is worth considering, especially since washing one window is not as expensive as it may seem.

We really hope that our article was useful to you and you learned something new for yourself about how to remove the film from plastic windows. Let home cosiness always bring only positive emotions, and the furnishings of the house set the thoughts in a positive way. Good luck!