How to clean the dishwasher at home from fat

The dishwasher was developed to eliminate food debris and traces of grease from the dishes, it constantly recyclesdetergents, so most owners do not even suspect that the device itself needs regular cleaning. To clean the dishwasher at home, it is not enough to walk around with a rag soaked in detergent, on accessible surfaces.

During operation, the internal elements of the device are gradually clogged with product residues and soap foam, so at some point, an unpleasant smell begins to emanate from the cleaning device. Do not forget about scaling and rust - even with the systematic use of special additives, they are able to hit the details of the device.

Features of the operation of the

dishwasher To maintain the functionality of the appliance at a high level and prevent breakage, simple rules must be followed, and then the unit will have to be cleaned much less often:

1. It is necessary to regularly inspect the water inlet hoses. If necessary, they can be cleaned with a toothpick or a knife with a blunt end.
2. At least once every two months, it is recommended to dry the rubber gasket located on the door.
3. The dishwasher is strictly forbidden to overload, it is better to wash the dishes in several turns.
4. Before loading, it is necessary to remove as much as possible the remains of food from the surface of the products.
5. The filling of the salt and detergent sockets should be checked regularly.
6. The functional device is strictly forbidden to load wooden, synthetic, copper and tin products, crystal with the addition of lead, disposable utensils.

Advice: As a precaution for the formation of scale and in order to clear the drain, it is necessary to regularly drive an empty machine, filling it with a liter of table vinegar. After manipulation, the device should be thoroughly ventilated before eliminating the pungent odor.

The manipulations to be carried out with the standard cleaning of the household appliance

It is not so difficult to clean the dishwasher, it does not even require a master call. It is only necessary to strictly follow the sequence of actions and not to disregard the auxiliary tools:

• First you need to turn off the power, check that there are no objects left in the trays.
• First, check the holes through which water is fed into the dishwasher. If there are any pollution, then we get them with tweezers or toothpicks. Do not push inside!
• We begin to clean the door, with special care we work through all the joints and joints. It is in these places most often accumulate dirt, which then begins to rot. We work with a soft sponge soaked in a detergent. If the formation is already withered, we help with a toothbrush.
• All baskets need to be cleaned manually. If they are removed, you can soak them for several minutes in a detergent to get rid of fat.
• The grate and filter processing are performed last. These elements are usually easily removed or unscrewed.

Regular carrying out of these manipulations will allow to maintain the machine at a high functional level, to prevent the appearance of unpleasant odors in the kitchen. But to fight with scum and rust will have to use other, more intensive means.

Home remedies to help get rid of scaling, rust and fat

To eliminate these problems at home, you can use specialized tools or folk approaches. In any case, if the procedures are performed correctly, the desired result is guaranteed.

• The easiest way is to start the dishwasher for 1 cycle without loading the dishes, while adding a professional solution for descaling.
• No less effective cleaning with vinegar and soda. After the standard treatment of the device, during which it is necessary to clean the filter, put a glass of vinegar on the bottom of the chamber and run it for a full cycle. Then we remove the glass and scatter the soda on the bottom, close the car for the night. In the morning we drive the unit after another complete cycle.

• A good result can be calculated using a borax. First, all surfaces must be cleaned with a large amount of the active ingredient, after which we wash the product by running the empty machine for one complete cycle. Then we expose the device for one more cycle, but in this case add a quarter of a glass of borax to the tray.
• Often a bleach is used to clean the machine from grease, mold and rust. It should be noted that this technique is not suitable for processing machines, parts of which are made of stainless steel. The impact may be too aggressive. To obtain the desired result, instead of detergent, pour a glass of bleach and start the machine at the highest temperature. Additional purification after this is not required.
• The soda bomb will help with the most problematic pollution. First we are preparing the bomb itself. To do this, mix two glasses of baking soda with three tablespoons of 3% hydrogen peroxide and a teaspoon of any essential oil. From the resulting mixture, similar to wet sand, we form balls of arbitrary size. Once they solidify, place them on the bottom of the machine. On the top shelf at the same time put a plate with two glasses of vinegar. Start the loop and enjoy the result. During the operation of the machine, a menacing hiss can be heard, no need to pay attention to it.

Despite the obvious effectiveness of these methods, sometimes they do not give the desired result. This may indicate serious problems in the operation of internal elements of the device, dense clogs. In this case, you will have to turn to professionals for qualified help. Independently disassemble the device is highly undesirable.