How to connect speakers from your home theater to your TV?

Very often the speakers that are built into the TV are not enough for viewing. Is there a solution to this problem? Certainly. You can achieve the necessary volume with the help of good instruments, which you must select and correctly, and connect. How to connect speakers from your home theater to your TV?- With this and understand in this article.

to the contents ↑

Speakers

First you need to understand the device of the most connected device. There are two types of acoustics:

• Active type. Such speakers work with an amplifier, which positively affects the sound quality.
• Passive. In such devices there is no amplifier.

Any type of device can be connected to the TV.Let's talk about each of them in more detail.

to the contents ↑

Active

devices How to connect speakers from a home theater to a TV?The design of the TV does not allow you to install decent dynamics inside. But nothing prevents you from connecting any external device that can output audio. You can use equipment of any kind, whether it's gadgets for a laptop, personal computer or home theater.

In any modern TV there is a special slot that allows you to connect TV with sound output devices. A powerful amplifier built into the speakers of the active type only simplifies the connection task. The power of such devices occurs with the help of the most common network - no additional manipulation is required.

The external speakers are easily connected to the TV directly - you do not have to purchase additional sets of connecting wires or adapters.

Each socket, which is located on the back of the TV, has its own designation. Marking helps to determine the purpose of each of them.

In order to connect the gadgets, you must follow the following instructions:

1. Find the audio jacks that have red( pink) and white color. The labeling of such inputs is called Audio-R( white) and Audio-L( red).
2. Connect all devices and start using them.

to content ↑

Passive speaker type

Such devices operate without the use of a built-in powerful amplifier. How to connect speakers from computer to TV using cable? To begin with, you need to connect the speakers to a pre-selected amplifier, and already connect it directly to the TV.

The connecting elements are supplied with the equipment, but if you do not have one, then nobody prevents you from acquiring them:

• It is necessary to check the values ​​of the output resistance of the amplifier element. It must necessarily have nominal values, which will correspond to the resistance( R) of the speakers.
• Also do not forget about the polarity. The left channel is to be connected to the left column, and the right channel to the right. If you make a mistake, the sound quality will be unsatisfactory.

Important! Remember that the power values ​​of the "amp" must be at least thirty percent of the same parameter used by the sound output devices. The wire must satisfy the following condition: the cross-sectional area( S) must be at least one square centimeter. The thickness of the cable ensures a reliable connection.

Mini-jack

Some technology has the usual "tulip" or "mini-jack" connector. To connect the stereo use a special AV receiver, which requires an additional cable. This method of connection is the most common among users.

How to connect speakers from your home theater to your TV?There is another way, which will be discussed below.

HDMI cable

Modern TVs have an HDMI connector. Connecting with this cable will help to get a very high quality sound, but not all audio systems have the appropriate input for such a cable. But this issue also has a solution - special adapters are sold in the hardware stores, which you can use for this method.

to the contents ↑

Using a tape recorder or a radio recorder

You can obtain a decent sound by using a music center or other music playback devices. In order to use this method, you must connect a TV and a music device with a special cable, and connect the device to the speakers.

For this method you need to use "tulip" or TRS.If you have problems connecting, we recommend using the adapter.

Important! Remember that the signal is output from the TV.That's why you need to connect to the connector that is responsible for the output. Such connectors are labeled OUT.

To avoid errors during connection, we recommend using the supplied instruction to the device you are using.

to the contents ↑

Small external audio system

Are you still unhappy with the sound quality? Then use a compact system that includes several speakers and a subwoofer. The sound will be much better than using the same tape recorder.

In order to connect the system, you must use the Scart connector, which is installed on the back of the device. With this you will be able to cope with the adapter to the "tulip" or the already familiar "mini-jack".

Now you know how to connect speakers from computer to TV, and not just from the computer. Following the instructions in this article and the manufacturer's recommendations, you can easily achieve the sound you need.