The door to the room creaks, what to do: proven tools and methods

The creaky doors terribly work on nerves. A particularly unpleasant sound occurs when the iron door creaks. What to do in this situation? How can I get rid of the creaking in any room and in the whole apartment? How to eliminate the creaking when opening a refrigerator or a balcony?

The best lubricants against squeaking loops

In fact, in most cases these problems are solved quite simply. As a rule, the fact that the door creaks is a consequence of the friction of the door hinge elements against each other. These elements need to be lubricated. There are several popular and effective tools for this:

• engine oil;
• diesel oil;Sparkling oil
• ;
• ciatim;
• solidol;
• various silicone greases and aerosols;
• special greases.

It is clear that the above substances and materials are unlikely at the right time to be at hand in the apartment or in the house. They will have to go to specialized stores.

And yet there are alternative means that are almost 100% found in any home:

• vegetable oil;
• candle wax;
• graphite shavings of a pencil soft brand.

However, these simple "folk" funds still can not be compared in terms of the effect, say, with engine or diesel oil.

About vegetable oil is worth saying. The door structure after the lubrication of loops with this oil, most likely, in a few days again begins to make sounds. In addition, the abundant and frequent use of sunflower oil causes corrosion. So, instead of the old squeak, an even more unpleasant screech may appear. That is, to achieve a short-term result, vegetable oil is quite suitable, but in order to achieve a long-term victory, you still need to apply something more serious.

How best to lubricate the hinges?

The procedure for lubricating loops must be carried out very carefully and carefully. There is a very serious risk - pinching your fingers. With your bare hands, you should not touch anything and do not do anything. Solidolide can be applied with a wooden stick. And machine oil is better simply poured into the problem area, into the clearances of the loop, using a syringe. By the way, engine oil can be used to combat rust.

Advice

To carry out the lubrication as high as possible and to be able to thoroughly wash the hinges, it will not be superfluous to remove the door that creaks from its place, and then, of course, put it back.

Of course, any lubricant can eventually develop its own resource. So, the door - it does not matter whether it's the entrance door or the interior room - will again open with a creak. But here there is nothing terrible: just repeat the proven procedure.

How to cope with the creaking of metal doors?

Modern doors are made of different materials, and in this matter it matters.

For metal doors, of course, will also be effective and engine oil, and other specified compositions, but only if the metal product creaks because of the friction of the components of the loop.

However, the annoying sound may be due to the fact that the canopies were installed incorrectly during the installation of the door. In this case, especially if the design is input, option one - contact a professional installer. Independently, without special knowledge and skills, it is unlikely to be able to fix everything.

The wooden door creaks? This is also fixable!

Wooden doors, such as the door of an old cupboard, can also creak. The tree has one essential feature: from time or from frequent contact it swells. And this when opening the cabinet leads to the friction of the butt on the door frame. As a result, a characteristic creak appears. You can get rid of it with the help of a tool like a plane.

Also worth adding is that especially often the problems with the creaking are pursued by wooden door designs of economy class.

Get rid of the creaking of the plastic door

Doors in the rooms today can easily do and plastic. Especially often this material is used to make doors that lead from the room to the balcony. This is due to the fact that now, in principle, plastic decoration on the balcony - it's fashionable.

And now the problem arises: the plastic door creaks? What to do and how to be? In general, all the tools mentioned in this article are relevant. However, there are opinions that some oils( spindle, machine, diesel) destroy plastic, and therefore it is better to choose, for example, silicone grease.

Note that any plastic door is actually quite heavy, so a creak can occur due to a phenomenon such as sagging. To eliminate this drawback, adjustment of the upper loop is necessary. And for this you have to remove the decorative accessories. The same thing will have to be done if the lower loop is problematic. Of course, it is better, if the given operations are taken by a professional and a specialist.

advice If, ​​despite all the efforts and methods, the creaking never disappeared, then the hardware just served its time and it must be changed to a new one.

How to "cure" the creaking of the refrigerator door?

And finally, it's worth mentioning about the refrigerator door. Usually in such a door there are both metal and plastic elements. A creak here can arise, for example, only when the refrigerator door opens wide. On the other hand, there is nothing surprising if the creaking appears right away when you open it.

In this case, the first thing to do is to lubricate any plastic rings on the bottom of the door. Then you need to move the door forward and backward, up and down, so that the lubricant is distributed evenly.

There may be another reason for the creaking - it is abrasion of the "native" plastic insert. It can be replaced with a fluoroplastic washer, it really helps to cope with unpleasant sounds when opening the refrigerator.

And one more thing: if the refrigerator has not run out of warranty, the scratch is quite an excuse for calling an official service center - they have to react and send a master.

So, if the entrance, interior or balcony door began to make annoying sounds, it can easily be fixed. It is also easy to put in order the door of the cabinet or refrigerator, the main thing is to correctly determine the cause of the annoying squeak.