Indesit wiu 81

Contents:
  • Main parameters
  • Machine button overview
  • Instruction for starting the machine wiu 81
  • Possible faults
  • How to avoid breakdowns?

Everyone wants that even the cheapest inexpensive household appliances can properly cope with the tasks. This is especially true for not so cheap washing machines, without which it is difficult to imagine your life today. This article is devoted to the description of the characteristics of the washing machine Indesit wiu 81, as well as a review of frequent breakdowns. After reading this information you will be able to decide for yourself exactly how suitable this model is to you.

to the contents ↑

Main parameters of the

The main technical characteristics of the Indesit wiu 81 machine are:

  1. Dimensions - 595 x 850 x 330 mm.
  2. Weight of loaded linen - 1,0 - 3,5 kg.
  3. The maximum pressure is 1 MPa.
  4. The minimum pressure is 0.05 MPa.
  5. The drum volume is 2.7 liters.
  6. Spin speed - up to 1000 rpm.
  7. Control program - loading 3,5 kg, washing temperature - 60 degrees.
to contents ↑

Machine buttons overview

The machine control panel includes:

  • Detergent dispenser.
  • Indicators - designed to control the washing process.
  • Temperature adjustment knob.
  • Function selection button.
  • Button for starting and resetting programs.
  • Button for turning on and off.
  • Indicator for turning on and locking the hatch.
to the contents ↑

Instructions for starting the machine wiu 81

  1. Turn on the "styralka" by pressing the power button. After that, the indicators turn on for a few seconds. Then they go out, and the sunroof and lock indicator light will blink.
  2. Load things into the machine and close the door.
  3. Select the program with the appropriate handle.
  4. Select the temperature at which to wash.
  5. Add detergent to the distributor. In addition, the dispenser has bleach compartments.
  6. Run the program using the start( reset) button. With the same button, you can cancel the preset program( press and hold the button for 2 minutes).
  7. After the program is completed, the sunroof start and lock indicator will flash. This is a signal that the hatch can be opened.
to the contents ↑

Possible malfunctions

Washing machine Indesit wiu 81- the unit is quite complicated, and there is something to go wrong. Eliminate the failure is not always possible independently, but the owner of the "stilalki" must have at least a basic knowledge of the causes of breakdowns and ways to eliminate them.

So, the most common signs of the appeared malfunction are:

  • Unstable operation of the device.
  • Chaotic lighting of detector lights on the control panel.
  • Display on the display of errors marked with the Latin letter F.
  • Traces of leaks.
  • The appearance of smoke or a strong smell of burning lights.

If one of the indicated signs is noticed, it is necessary to give the domestic assistant the maximum attention and to address to the expert. Let's consider the most probable causes of malfunctions and ways of their elimination.

The machine does not turn on the

The wiu 81 machine does not respond to commands that are entered from the control panel, the indicators flash. Possible causes of this behavior of the washing machine are:

  • damage to the power cord due to rubbing or burning wires;
  • failure of the plug;
  • no contact in the start button;
  • no door lock;
  • there is no electricity in the house;The
  • plug is not properly plugged in or plugged in at all( there is no contact).

You can resolve the problem in the following ways:

  • replace the plug or power cord;
  • replace contact group;
  • open the door and close it again.

Washing does not start

The reasons may be as follows:

  • poorly closed machine door wiu 81;
  • the start button is not pressed;
  • the water tap is blocked.

Extensive washing process

Machine responds incorrectly to commands. Periodically it is necessary to apply manual control of the washing regime. Possible causes of incorrect operation are:

  • breakdown in electronics;
  • failure of temperature sensors;
  • malfunction of the heater and the need to replace it.

Fault finding algorithm:

  • Checking the status of the J8 connector pins.
  • Resistance measurement at terminals 11, 12 of connector J8 - normally it is 20 kΩ.If the value of the indicator differs from the norm, you need to check the status of the wiring to the sensor.
  • Replacement of temperature sensor or electronic module.

The machine Indesit wiu 81 works with a strong rumble and noise

If during the washing process the unit is very noisy, the reasons for this may be as follows:

  • damage to one of the oil seals;
  • bearing support failure;
  • wear shock absorbers;
  • weakening of the counterweight attachment.

Ways of elimination of these failures are as follows:

  • complete replacement of oil seals;
  • bearing support replacement;
  • replacement of shock absorbers;
  • broach fastening.

Drum does not rotate

Reasons may be as follows:

  • problems with the motor or drive belt;
  • Faulty programmer, the need for a full replacement.

Incorrect operation of the water supply and discharge

The problems in Indesit wiu 81, which occur with filling and draining the water, can occur for the following reasons:

  • pump failure with a check valve;
  • closing of contacts on control devices;
  • problems with draining system;
  • electronics began to malfunction.

The drain can also be broken due to a blockage in the sewage system or from clamping the drain hose.

There are several ways of eliminating this problem, depending on the cause:

  • lock replacement;
  • replacement of the electronic module wiu 81.

There is a constant refilling of water and its discharge

This phenomenon can be observed for the following reasons:

  • The location of the drain hose is below 0.65 or more than 1.0 m from the floor line.
  • Immersion in the water of the end of the drain hose.

In order to prevent this phenomenon, a special valve - anti-siphon - is built into the machine.

Occurrence of leaks

Leakage leakage may be a cause of leakage, poor anchoring of the drain hose or cracks that appeared in hoses intended for water intake and drainage.

Remedy:

  • hose replacement;
  • replacement of the seal.

It is also necessary to check the voltage supply to the contacts of the lock, which is responsible for locking the door.

Unstable spin operation or lack of response to the

commands. The causes can be: a breakdown of the tachometer or a malfunction of the mode system. The failure is eliminated by replacing the tachometer or switches.

The appearance of smoke and the smell of the ignited wiring

The cause of this may be a failure of the TEN or a short circuit in the circuit. If the heater is broken in Indesit wiu 81, it can only be replaced.

Simultaneous flashing of the power indicator with any other

indicators You can eliminate this phenomenon by removing the plug from the outlet, wait 1 minute and then turn on the machine again.

Excessive foaming

It can be caused by too much detergent or detergent, which is not suitable for machines with front loading.

to the contents ↑

How to avoid breakdowns?

Even the most reliable technique requires preventative maintenance and care. If you closely monitor the condition of the machine Indesit wiu 81, you can significantly extend its working life. There are several simple rules, observing which, you can not prevent breakdowns and operational errors:

  • When washing lace underwear and bras it is desirable to place them in special bags. So you can avoid damage to the laundry.
  • Curtains are erased by first placing them in a sack made of mesh material or in a pillowcase. Washing should be done separately, on the program without spinning. Loading of the drum should not exceed half.
  • The door of the washing machine, which closes insufficiently tightly, can adversely affect the operation of the device. Lingerie, stuck in the door, breaks the rubber band, because of which water seeps into the gap. Such inattention can also lead to the rupture of the drive belt. And this will negatively affect the efficiency of the erasing device.
  • At the end of the wash, it is advisable to remove the plug from the outlet, since the unit may fail due to voltage fluctuations in the electrical network. To prevent such breakdowns, you can purchase a relay to protect against sudden voltage changes.
  • To avoid mismatch of phase conductors, the use of extension cords is not recommended.
  • Installing an eraser in the bathroom is convenient, but excessive humidity affects the operation of the electronic parts of the machine. In addition, metal parts are exposed to corrosion much more quickly.
  • Do not lay laundry more than the technical specification of wiu 81. The quality of washing will be much worse, and the risk of breakage is much greater.
  • If the clothes have buttons and fasteners made of metal, they must be fastened before washing.
  • If there are rats or mice in your house, try to get rid of this unpleasant neighborhood as soon as possible. Rodents can seriously damage home appliances.
  • It is not superfluous to recall that use in an automatic machine can only detergents designed for this technique. Great foaming can cause breakdowns.
  • Some people believe that automatic washing machines are so versatile that they can erase everything. This is mistake. Cushions with feather filler, leather boots, accessories for the machine can not be machine-washed. Shoes just get spoiled, and a feather out of the pillows can clog the drainage system.
  • Shoes from canvas are first cleaned of dirt, and then washed in a car with denim items( if color allows).White canvas shoes can not be washed with white things.
  • The down jacket or jacket on a goose or duck down can be wiped in the car, after having turned inside out. In this case, the total load of the machine must not exceed 3 kg.
  • Wool products. They are washed in an Indesit wiu 81 machine using special detergents, with a total machine load of not more than 1.0 kg.

Now you have a complete idea of ​​what kind of washing machine Indesit wiu 81. We hope you could determine if it is worth it to buy, and if the answer is positive, then even in the event of any malfunctions, you can deal with themforces.