Food processors presented hundreds of models and manufacturers are constantly working to improve its products. As a result, the market for kitchen appliances were food processors, among which the consumer is not easy to make a choice.
Content:
- How to choose
- Food processor with a meat grinder
- Food processors to test
- Professional food processors
- Food processors to dicing
- Food processor with juicer
- Food processor with the function of cleaning potatoes
How to choose
When choosing a first important to focus not on the price, and functionality. Consumers overpay for equipment with a large number of functions that can not be useful.
In pursuit of the same low-cost option buyer receives the model with a limited set of actions. To not make the wrong choice, it is important to imagine what different types of such equipment and that it is necessary to be guided first and foremost.
Functional
If you buy a food processor for only two or three operations (eg - for crushing products and dicing) - limit to an inexpensive model with a standard set of functions.
If you want the unit is done for you routine operations - should look more expensive model with additional opportunities, but we should bear in mind that the more operations perform this technique, the more its size and cost.
material bowl
In the manufacture of food processors use three kinds of materials, and combinations thereof:
- robust and expensive metal;
- short-lived plastic;
- glass.
The case itself is made of a technique of these materials in various combinations, but since the basic functional element of such a technique is bowl - pay attention to the material used for the manufacture of capacity.
Models with plastic bowl cost less, but this element is easily damaged, and buy a bowl additionally can be difficult during operation or cleaning.
Bowls of glass is stronger, and if handled carefully - they will last decades. Such containers are neutral to chemical compounds and therefore use for washing even those detergents that contain abrasive additives.
This also applies to metal bowls, but these models are more expensive.
Power
From this figure depends on efficiency of the heater and for what purposes it can be used. Lay devices have a capacity in the range of 450-1000 watts, but higher than this figure - the more expensive model.
Low-power models are suitable for families of three or four persons and provided that such equipment will be used infrequently. If you are using a technique regularly and treat a lot of products - it is better to pay attention to the model capacity of 700 watts and above.
Professional equipment may have a capacity of up to 2000 watts, but at home it too: work with full expenditure of resources equipment will not, and you just overpay.
Rotational speed
This figure determines the purposes for which better suit a particular model. When choosing a food processor for this position, please note the following nuances:
- Apparatus with a speed of rotation of 10-12 thousand revolutions per minute can be used for grinding even the hardest of products.
With appropriate nozzles and high power some current models of milling even chicken bones.
- Models with rotation speed nozzles less than 8-6 thousand revolutions per minute are suitable for whipping and grinding with a large number of products will have problems.
- Today, every food processor has two to 14 speeds, which are switched using the buttons or knobs.
The average model operates at speeds of 5-6, but there are cost options with two speeds and expensive equipment in which the number of speeds - 10 or higher.
density
Dimensions of equipment depend on the method of storage of additional tips: models that provide built-in compartments for storage of tools, take up much space.
Some machines do not have such offices, and you may have to determine the nozzle storage location. It's uncomfortable, but after using the technique is easy to remove in a cabinet or on a shelf.
As for weight - usually, this technique is not heavier than 9 kg, unless it is a question of professional equipment. The average weight of such devices is 4-6 kgs.
In this case, the choice depends on how often the device is operated and where it is stored. If the processor is used on a regular basis and at the end of work you will need to remove it in a cabinet or on a shelf - it is better to choose a lightweight model.
If the technique has its place on the table, and rearrange it is not necessary - approach to the selection on the basis of weight is not necessary.
Food processor with a meat grinder
kenwood KVC5030T
Food processor with a meat grinder - one of the most popular types of combine harvesters, which will save you time and effort in cutting meat.
This technique replaced the hand-held grinder from the market, since it can help chop the meat into pieces, cut into slices or make stuffing it became possible for a few minutes.
In addition to the special knives for meat, some models can be equipped with special nozzles for tamping skins for sausages or sausages.
Among such technology one of the most popular models is the Kenwood KVC5030T.
Characteristics:
- Power - 1100 Watts
- Bowl - 4.6 l
- Speeds - 6
- Included - chopper, shovel, 5 nozzles
- Material - stainless steel, glass
- Weight - 8, 68 kg
Benefits
With a large number of functions it differs affordable management, which will deal with every woman, besides, Kenwood KVC5030T has other advantages:
- bowl and the housing are made of metal;
- compact size;
- a few number of functions;
- reliable and robust housing design;
- low noise levels;
- six-speed modes.
Disadvantages:
Among the shortcomings can be noted the high cost of the model and the relatively large weight, but the last - conditional minus because of the large mass of the device becomes stable and does not slip on the work surface during work.
Judging by the reviews of consumers, this machine has no flaws, and most importantly - Kenwood KVC5030T proved even available for conservative housewives who are not accustomed to electronic technology with multiple functions, switches and buttons.
Food processors to test
Bosch MUM 56S40
Today, many people prefer not to buy bakery products in stores, and make their own cakes at home.
In the market of kitchen appliances has long appeared compact BreadmakerBut batter the hosts had to either buy or kneading by hand, which takes time and human resources.
With modern combines kneading process can be automated.
- Apparatus for making dough - this embodiment of the power of at least 800 watts.
- The size of the bowl such models more than others, because the dough is mixed in large batches.
- In order to save some manufacturers make kitchen machines for dough with two or three speed modes, but they are enough to perform other standard operations.
One of the best models for such purposes - Bosch MUM 56S40.
Characteristics:
- Power - 900 Watts
- Speed - 7
- The volume of the bowl - 3.9 liters
- Packaging - a press for citrus chopper
- Tips - 9
Benefits
- pulse mode;
- from three to six additional attachments included;
- additional functions (processor can be used as both a blender and juicer).
nedostaka
- many plastic parts
Reviews
In the opinion of the shortcomings noted low landing knife under the meat grinder. There are complaints of material - plastic unreliable.
Professional food processors
Bosch MCM 62020
Models of this technique are divided into household and professional use, and if the first cope with cooking for a family, for the operation, they will not work in the catering points.
Professional food processors have a number of features which allow the technique to cope with problems better:
- More power. Among the professional food processors are models capacity of 1000-1300 watts.
- Bowl large volumes make it possible to process more products.
- A set of special nozzles that are not found in domestic models. This centrifuge specific knives, blades, grid.
- Management of this technique is difficult to master, since a large number of functions of the control panel equipped with LEDs, switches modes and buttons, and the treatment of such harvesters require practice.
Among the professional kitchen models released Bosch MCM 62020.
Characteristics
- Power - 1000 W
- Bowl - 3.9 l
- Options - citrus, 7 nozzles
- Material - plastic
Benefits
- quiet operation;
- small size;
- quick assembly and disassembly;
- the technique is easy to wash, even in inaccessible places;
- processing of large volumes of products.
disadvantages
Due to the structural features of this model has a number of shortcomings that producers have not been able to eliminate and minimized:
- impossibility of replacing the nozzle during operation;
- apparatus scatters products in the process;
- low location for mounting nozzles;
- high price.
Reviews
food service employees who've used this unit, note: in spite of such drawbacks, Bosch MCM 62020 increases productivity and reliability and endurance of this technique can not be compared with other machines.
Food processors to dicing
Bosch MCM 68885
It is believed that the food processor - a "rough" technique, which is able to crumble in a matter of seconds, chop, chop and blend products. But in the delicate operations it is unable to, and beautifully cut fruits or vegetables cut into individual accounts.
Despite the constant improvement in this respect, food processors manufacturers can not ensure that the machine is sliced products equally and uniformly.
In the market of household appliances are dozens of models, including - Bosch MCM 68885.
This unit is equipped with specific attachments that allow you to beautifully cut fruit and vegetables into cubes, strips or stripes.
Characteristics
- Power - 1250 W
- Bowl - 3.9 l
- Options - Disc dicing, 8 nozzles
- Material - plastic
Benefits
- low noise and virtually no vibration;
- the availability of new and additional accessories in a hardware store.
disadvantages
- Bosch MCM 68885 sizes are relatively large when compared to other similar;
- Bowls made of fragile plastic;
- the device is difficult to disassemble for cleaning.
Reviews
Food processor fond of housewives, who first noted quiet operation.
This is due to the presence of the device rubberized feet: because of them in the process does not combine moving the table and the operation of the engine is not transmitted to the work surface, whereby reduced vibration.
Consumers note that the harvester carefully dices products, while judging by the reviews, this model handles with soft fruit and hard vegetables (even with cucumbers and potatoes).
Consumers noted the high cost of the combine: the price is even higher than some of the professional model.
Food processor with juicer
kenwood KVC5050T
food processor should run at high speed for high-quality pressed juices, so when choosing a technology for these purposes, pay attention to the fact that the number of revolutions per minute was as high as possible.
The maximum rate in this area - 12 000 revolutions per minute, however, these models cost from a few tens of thousands of rubles and above. It is better to consider the option with the nozzle rotation speed of 8000 rpm.
It is undesirable that the cup made of plastic or metal. When interacting with such materials juices absorb harmful substances, particularly if low-grade Chinese plastic used to make the cup.
Preferably selected from a glass container, it is desired to purchase additional capacitance if you want to handle volumes.
Engine power in this case can be ignored, but it should not be less than 500-600 watts.
Load at squeezing juice will be small, but the duration and the power of the food processor depends on the hardness of the products that it can process and the duration of one cycle of operation.
Pay attention to complete the selected models were steel sharp knives of different form factors and modifications. Preparation of juices of different products require special packing.
Characteristics
- Power - 1100
- Bowl - 4.6 l
- Speeds - 6
- Material stainless steel chashi-
- Included - Juicer, Grinder, 5 nozzles, paddle
Benefits
- advanced functionality;
- big bowl.
disadvantages
- cost of
Reviews
Judging by the reviews of consumers inconvenience is the lack compartments for storing attachments and solid vegetable juice pressed well enough.
Food processor with the function of cleaning potatoes
Nozzle - potato peeler Kenwood AT444
The sole function, which until recently could not handle food processors - cleaning potatoes. This process, which even in expensive restaurants often performed manually.
But today, thanks to the additional nozzles, potato peelers, and this problem is partially solved. And the potatoes after this treatment has to hand trimmed, like tips to save time and manpower.
To combine different vendors provided additional nozzles for cleaning. They are versatile and suitable for such attachment models of one line.
For example, the nozzle for the Kenwood AT444 potatoes suitable for many models of Kenwood products but for other technology Brands such a device is not suitable due to the nature of attachment, and not all manufacturers produce these special knives.
Features Kenwood AT444
- Capacity - 1 kg of potatoes
- H x W x D (cm) - 17.5 x 23 x 23.5
- Weight - 1 kg
- Material - plastic
- Compatible with models Food Processors KENWOOD: CHEF KMC57008, CHEF TITANIUM KMC050, CHEF TITANIUM KMC053, CHEF KM336002, CHEF KM353, CHEF KM355, CHEF KM357