Replacement of the bearing in the washing machine Samsung

Domestic appliances from the Samsung manufacturing company are very popular in modern apartments and the recognition of the housewives, thanks to their high quality, user-friendliness and durability. However, no matter how perfect the styralka, over time it may require service and repair. The most vulnerable point of any device is a mobile node. In this article, we will tell you how to replace the bearing in a Samsung washing machine, and what you will need to perform this procedure.

to the contents ↑

What is needed for repair?

The bearing on the washing machine "Samsung" can not be repaired, therefore, if necessary, it is simply changed to new components from this production company. Today the required repair kit can be found in almost any service center or branded shop of spare parts for household appliances.

The Samsung repair kit includes the following parts:

• oil seals;
• large and small bearings.

Important! Also in the kit comes a special lubricant for washing machines, which is useful to you in the process of work.

In addition to the original parts, you also need to prepare the following set of tools:

1. Small copper hammer.
2. Pliers.
3. Screwdriver set - flat, cross-shaped and indicator. Hose wrench.
4. Metal tube.
5. Curved hexagon wrench.
6. Marker.
7. Adjustable wrench.
8. Sealant.

to the contents ↑

Why is it necessary to change the bearings?

Samsung Washing Machine bearings fulfill one of the most important and special functions of the whole mechanism - they ensure a smooth and even rotation of the drum. Due to the large number of revolutions, these parts quickly wear out and fail.

Important! A malfunction of the bearings in the movable unit of the washer may lead to a significant decrease in the quality of the washing and spinning of the laundry, as well as an increase in the noise level during the operation of the device. If you do not replace the component in time, it can lead to a malfunction of the drum, repair of which will cost the user many times more.

to the table of contents ↑

Replacement of the Samsung washing machine bearing

The procedure for replacing bearings on a Samsung washing machine is performed in several basic stages.

Dismantling the

tank To reach the bearings, you will almost completely disassemble the styralka. Begin by removing the top cover of the device. To perform this operation is simple enough, because to move the top wall it is enough to do the following:

1. Unscrew the fixing bolts.
2. Slide the top cover of the styrler towards you.
3. Lift the part up.

Important! After removing the top panel, remove the powder container from the structure, as water can accumulate in it, and you should not allow moisture to enter the electronics during the repair process.

Also, carefully disconnect all hoses that supply water to the Samsung washing machine.

Important! Before removing the hoses, unfasten the clamps with pliers.

It's time to dismantle the front wall of your stylalki. To safely and effectively perform this action, follow these instructions:

1. Use a screwdriver to unscrew the securing bolts of the manhole lockout system.
2. Disconnect the sensor wires.
3. Use a flat screwdriver to gently pry the steel cable in the base of the rubber cuff.
4. Remove the clamp from the groove and unscrew the mounting bolt carefully and carefully.
5. Push your fingers under the manhole cuff to pull it out.

Now the front cover of your stylalka is held only by the wires of the internal electrician, which should be disconnected. For the convenience of solving this problem:

1. Place the device on its side and unscrew the bolts and remove the bottom of the machine.
2. Disconnect all visible wires, marking them with a marker in parallel, so as not to get confused during the reassembly process.

Important! Connecting wires with sensors contacts are fragile enough, and therefore all work with them must be done very carefully.

To remove the styrler tank, you need:

1. Dismantle the racks at the bottom of the appliance. To do this, it is enough to unscrew the four mounting bolts and remove the parts from the bottom of the unit.
2. Returning to work with the top of the washer, remove the fill valve, nozzles and sensors.
3. Now, to free the path to the tank, it remains only to unscrew the remaining bolts and remove the control panel together with the front wall of the unit.
4. Gently pull out the tank of the washing machine with the engine.

Important! When extracting this part, try not to touch the contacts, because otherwise the repair will not only require more time, but also significantly increase in value.

Removing and replacing bearings

After removing the tank from the body of the washing machine, you need to uncover the drum:

1. Unscrew the clamps and clamps, and remove the top and bottom parts of the tank.
2. Having access to the drum with an axis, you can proceed directly to the extraction and replacement of bearings.

Two large and small bearings are located inside the aluminum sleeve hub: large and small:

• The larger component is knocked out by gently tapping the metal rod in the direction from the outside to the inside.
• The smaller part is knocked out in the opposite direction.

Important! When knocking out the bearing, it is impossible to tap it with a hammer in one point, since if the part is bent there is an increased risk of its locking in the bushing.

Thoroughly wiping the inner surface of the bushing with a clean rag, you can proceed to install a new bearing on the washing machine "Samsung".This procedure is carried out using the following algorithm:

1. Place the bearing in the bushing.
2. Maximize the detail with your fingers.
3. Place a wooden block over the bearing.
4. Gently tap the wood several times with a hammer, which will lead to a gradual landing of the bearing on its proper place.

After the replacement of the bearing on the Samsung washing machine is complete, you can start assembling the unit, which requires repeating all the steps in the reverse order.

In this article, we talked about how to replace the Samsung Washing Machine bearing with your own hands, and we hope that the new parts will ensure the full operation of your home appliance for as long as possible.