Dishwasher Bosch Silence Plus

The dishwasher is a modern assistant for every housewife. More and more representatives of the fair sex when thinking about buying this device and embody their desire to live. However, like all devices, the Bosch Silence Plus dishwasher has its own error codes that occur with different malfunctions. What they mean and how to eliminate them, you will learn from this article.

to the contents ↑

Bosch Silence Plus dishwasher and its features

Bosch silence plus takes care of your dishes. Throughout the whole cycle of work, it carefully performs all its functions:

• Due to the inverter engine saves electricity and water.
• Equipped with a dishwasher five programs, due to which you choose the most suitable for you to wash a certain dish.
• The main advantage of the Bosch Silence Plus dishwasher in front of other models is that the rinsing of the washed products takes place with hot water. Due to this, all microbes die and there are no micro-traces of the detergent on the dishes.

Important! Like many other models, there is a function of protection from children, leaks and mechanical damage. This machine is completely safe in operation.

to the contents ↑

Faults of the dishwasher

The Bosch Silence Plus dishwasher, like other household appliances, which is intended for a variety of purposes, sooner or later informs its owner about a breakdown of the device. There are special error codes, knowing which, you will be able to estimate the malfunction.

Important! At the slightest discrepancy, you are able to eliminate the breakdown yourself. In more complex cases - it is worth considering the call of the master or contacting the service center.

So, let's take a closer look at all the error codes for the Bosch Silence Plus dishwasher.

E1

The E1 code means that the water heating function does not work in the machine.

Causes of error E1:

• out of order TEN;
• breaks the module, which reports the operation of the heat of the heating element.

To eliminate this drawback, you need to check the thermostat and the safety sensor that reports the flow of water. Also, it is worth paying attention to the water sensor in the device.

E2

This code indicates that a temperature sensor error has occurred. It is necessary to eliminate its breakdown. This sensor is located near the TEN and has a certain resistance.

E3

If an error occurs that is related to the fluid level, then the device reports this fault by means of the E3 code. In case of this discrepancy, the water will be drained.

Causes of E3 breakdown:

• a pump failure that is responsible for draining the water;
• hose "akvastop" is defective;
• filter is clogged;
• broke the pressure switch.

E4

The E4 code indicates that the Bosch Silence Plus dishwasher malfunctions the fluid flow switch. Simply put, the water is not distributed correctly throughout the volume of household appliances - in some compartment does not fall, but somewhere to a greater extent. The reason for the breakdown can be two factors:

• engine malfunction;
• hose clogging.

You can solve the error yourself only in the second variant.

E5

The E5 alarm signals the owner of the unit that the liquid level in the device has been exceeded. This can occur due to a breakdown of the pressure switch or the exhaust valve.

E6

Bosch Silence Plus dishwasher - a fault code E6 informs the owner of the equipment that there are problems with the Aquasensor. They can occur if the dishes are not heavily soiled, and the program for very dirty dishes is chosen. Then there is a saving of liquid and electricity.

Important! The function "Aquasensor" is responsible for the contamination and hardness of the water, so the device can independently determine the degree of contamination of your dishes.

E8

The E8 mismatch signals a too small liquid level in the pan. During this failure the circulating pump does not work and the water does not heat up.

Code E9

Error with the symbol E9 indicates a fault in the heater, resulting in no heating of the water. To determine the complexity of the failure, it is necessary to check whether there is a break in the heating element.

E11

The E11 fault informs you that the PMM operates without a heater. In this regard, an error has occurred in the power supply or in the contacts. To solve it, it is better to contact the service center.

E14

In the Bosch Silence Plus dishwasher, an error E14 sometimes occurs. In this discrepancy, pulses do not flow to the circular pump sensor.

E15

Fault E15 signals that the "Aquastop" has started. This function is triggered by water leakage. That's why you should immediately check all pumps and hoses.

E16

The E16 code means that unauthorized water is set in the device. At the initial stage, it is necessary to check the sensor for the intake and filling of water.

Important! A common cause is too much foaming due to the poor quality of the detergent or excess dosage.

E17

The code in the Bosch Silence E17 dishwasher signals to the owner that there has been a water flow error in the device. To remedy this, check the flow sensor. Another reason is the too high pressure at the

input. Important! If there are E18 symbols, do not take any action. Wait until the program is completed.

Symbols E21 on the

display If you saw that there is an error on your display E21, then be aware that this is a problem with the pump that is responsible for draining the water.

To eliminate this drawback, it is necessary to check the impeller of the pump, suddenly any garbage has got into it. If there is no weeping, then it is necessary to think about replacing the pump, which could simply be worn.

E24

With this error, there is a bad or no drainage at all. The cause may be garbage, dirt or hose clamping.

E27

If the E27 symbol appears on a Bosch Silence Plus dishwasher, it is worthwhile to know that the power supply voltage is too low. This happens at the rush hour. When this problem occurs, you should think about buying a stabilizer.

Now you know all the error codes and will be able to restore the operation of your equipment - yourself or with the help of a master from the service center. Let your technician never break down and report any malfunctions.