The new teapot smells of plastic - what should I do?

When buying a kettle, we usually do not smell it, and it's already clearing out at home that it does not come off an absolutely pleasant smell of plastic. And by the way, then all the water that has been in it also begins to smell. The new teapot smells of plastic - what should I do? Well, do not return it immediately to the store, especially since we bought it because we liked it. Still, the output can be found, consider options for removing unpleasant odors.

to the contents ↑

Where does the smell come from?

Unpleasant odor can be caused by:

• Remaining after production of oil;
• Plasticizer, which is added to the enclosure to increase the life of it;
• Dye of poor quality.

If the oil is practically safe and easy to clean, then the dye and plasticizer will have to tinker.

to the contents ↑

Remove the smell of

How to remove the smell from the electric kettle so that it does not spoil the taste of the drinks?

• Very effective is the use of lemon juice. The juice from three to four lemons is squeezed out inside the tank, water is added, and then you need to turn on the device. You do not need to pour water! After twelve hours, the device should be boiled again and then rinsed using cold running water. If necessary, the actions are repeated.
• An alternative method is citric acid, besides, it costs not so much. Up to the maximum, we collect water and pour into it 50 grams of citric acid. Next, you need to do the same as in the case of lemons: boiling, leaving, boiling again and rinsing.
• You can use the peel from the lemons. The capacity should be filled halfway with lemon peel, and then the water is added to the maximum level. We act the same way as in cases with lemon juice and citric acid.
• Half a cup of 9 percent vinegar or two tablespoons of 70 percent acetic essence pour into the kettle. There we add water and turn on the device. The liquid should not boil, as it can overflow. You need to heat it two or three times, and then pour the solution and rinse all the internal surfaces of the device.
• Universal product - baking soda. How to remove the smell from an electric kettle with this product? Baking soda, three tablespoons, poured into a flask, water is added. The solution must be boiled, cooled and boiled again. Then the solution is drained and the device is thoroughly rinsed.
• And you can pour water inside and add a few laurel leaves to it. The solution is boiled, then washed off. The device must be thoroughly rinsed.
• An unusual method is to use a "Sprite" drink. The bottle is poured into the kettle, boiled and left for about ten hours.
• If the case is very severe, you can use detergents. The product is poured in, diluted with water and boiled. The device is thoroughly rinsed, clean water is poured and boiled and drained.

Important! When using harmful or aggressive mixtures, it is essential to thoroughly rinse the device. If you do not do so, you will be seriously harmed by health.

to the contents ↑

Remove musty smell

In some cases, you need to know not only how to remove the smell of plastic from the kettle, but also how to cope with an unpleasant musty smell. This problem arises because the water does not change for a long time. For example, simply add a new portion and boil again. Or there may be a problem with tap water, in which a large number of various impurities are contained, subsequently deposited on the walls and the heating element. In any case, it must be solved, and it can be done in one of the following ways:

• Citric acid is a universal remedy. She falls asleep( 50 grams), boils water and pours.
• You can use ordinary sugar. Sugar, two tablespoons, is poured into the bottom of the flask. After twelve hours, the kettle must be rinsed using warm water and lemon juice.

Important! To the smell of mustiness did not appear, it is better to try not to leave excess water in the device. In addition, the lid should be kept open.

to the contents ↑

Useful advices

You have studied the question if the smell of plastic in the kettle is like clean, but if all the methods turned out to be ineffective, it is better to replace the device with a higher quality one. For example, if glass or stainless steel is used for manufacturing, unpleasant odors will not appear. But it should be noted that such household appliances will cost more.

Important! Remember: harm to health, water, boiled in a plastic teapot, does not bring, but it needs to be filled with fresh. If water remains in the bulb for a long time, harmful compounds can enter it.

It is quite possible to remove the smell from the teapot .In addition, for this you do not need to apply any special special tools. It is quite possible to cope without chemistry.