Sink over the washing machine - decorate the small bathroom comfortably

Not every bathroom can easily solve the question: where to put the washing machine? Owners of small bathrooms are very often faced with the problem of convenient, competent and functional location of household appliances, sanitary ware and furniture. In this case, an excellent solution will be a sink over the washing machine, which allows to organize successfully the space of a small room. Especially this option is ideal for small-sized baths, because an uncomplicated cunning move will make it possible to rationally use the useful area, optimally combining the layout of the lower and upper tiers.

to the contents ↑

Advantages and disadvantages of the design: washing machine with a sink

When deciding to install household appliances so that the washing machine under the sink fits, it is necessary to know that experts recommend using this option only as a last resort. The so-called water-lily shells have some disadvantages and inconveniences during operation.

Sink over washbasin

Consider the main disadvantages and disadvantages caused by the fact that the sink is located above the washing machine:

1. Mounting the sink requires a special non-standard siphon. To find the necessary equipment, it is necessary to bypass a certain number of outlets, because the set with a sink does not include the devices of such a plan. In addition, if there is a problem of replacing the siphon because it is unusable, then the search for the necessary element will have to be repeated.
2. Such drains increase the chance of blockages and stagnation of water in the bowl. This is due to the fact that the drain takes the used water not down, but towards the wall. Thus the movement of water in this case occurs horizontally.
3. Discomfort when moving around the room. If the installation of the washbasin is not performed correctly, the edges of the washing machine will protrude, and thereby impede the freedom of movement through the bath. In addition, during the use of household appliances, this design also delivers discomfort.
4. The sink can not be approached as close as possible, although there are designs that make it possible to avoid inconveniences when using them.

Advantages of the sink arrangement above the washing machine

The main purpose of installing the sink over the washing machine is to save space in a small bathroom. Consider the main advantages of this arrangement:

• Save space even in the very, very small baths. Usually, the space under the sink is idle, it remains empty, and such a structure fills this niche as much and functionally.
• Design and shapes of sinks for installation above the washing machine are diverse, which will give an individual note to the bathroom interior.

to the contents ↑

What should I consider when buying equipment?

To carry out its extraordinary design follows with the purchase of suitable equipment. Start by choosing a mini-washing machine.

What kind of household appliances to choose?

Modern manufacturers produce a fairly wide range of such models, which differ in height and depth. Choose the appropriate model, based on the size of the space under the sink:

• height of the washing machine should not be more than 60 cm;
• depth - from 34 to 43 cm

This machine is designed only for a minimum load of laundry( no more than 3 kg), so it is possible for a large family the choice of such a model is not cost-effective.

Important! If you do not want to install a miniature device, but prefer a standard home appliances, then in this case choose a narrow model. In this case, the washing machine under the sink can fit entirely.

The height of the entire structure( washing machine + washbasin) is calculated by a simple formula: to the height of the sink and machine add 15-20 cm to the distance between them. The resulting value and will be - the distance from the floor to the upper edge of the washbasin. The most comfortable for a person of medium height will be a distance of 80 cm and a little higher for a person of higher growth.

Important! If the received height differs significantly from this index, then reconsider your choice and think about another model of the washing machine, or change the height of the stand under the sink.

How to choose a sink?

A sink over a washing machine is usually called a "water lily".It represents a flat, more often - a square, a bowl about 20 cm deep. Some foreign manufacturers produce models of special sets for small bathrooms, including both a washing machine and a suitable sink for it. This is an ideal option, since all devices are well suited to each other. However, it is possible to find separate production models for both foreign companies and domestic ones.

Water lily shells differ in a number of parameters:

• In form. Plumbing is available in the following forms:
  1. Rectangular.
  2. Square.
  3. Non-standard shape( for example, with angular arrangement of the crane).
  4. Oval.
• Depth: Depending on the model, the depth varies. Preference should be given to deeper shells to avoid splashing water on the styralka.
• By the presence of a hole for the mixer. In some models, the hole is missing, which allows you to install a drain closer to the wall, and further save space in the bathroom.
• By type of drain. There are the following options: draining back and down. The second option is most comfortable to use.

Important! All models of modern lavender shells are produced with decorative caps, in order to avoid overflow.

Tips and Tricks:

• Before you buy the necessary sink, be sure there is a proper drain system. It must necessarily be taken out of the home appliances, since the location of the drain system over the machine is dangerous and significantly increases the risk of electric shock. All water-lily shells should have only a safe drainage system.
• Drain systems( vertical and horizontal) allow for different flows of water. Of course, if the flow is directed downwards, the water leaves faster, but for narrow washing machines, models with horizontal drainage in the rear wall are usually produced. So if you choose a bowl with a horizontal drain, be prepared for frequent cleaning and washing the device.

to the contents ↑

Rules and installation order for a washing machine for a sink

Installation of equipment of this type has its own nuances and features. It is necessary to consider the following requirements, so that the sink over the washing machine does not interfere with you and both objects work properly:

• If the outlet sewer pipe is located on the wall behind the washing machine, the shell width should not be less than 58 cm. In the absence of a pipe,be 50 cm.
• The drain pipes must not be located above the unit casing, as a result of vibration, their connection may be broken and as a consequence, water will fall on the equipment.
• The sink over the washing machine should cover it from all sides as an umbrella so that water does not get on the device. The front of the bowl should protrude above the washing machine by at least 5 centimeters, or better even more.
• All connections must be sealed.
• All wires must be completely isolated from moisture.

to the contents ↑

How to install the

equipment If you decide not to use the help of qualified wizards, but to perform the connection yourself, follow the instructions below.

Step # 1.Mounting the device on the wall

If you purchased a bowl of Russian production, then the kit-brackets for fixing the plumbing to the wall must go with it. If there are no such fasteners, then get them in the store.

Instruction:

1. Install the fasteners from the marking. Experts recommend not to change the already installed in the construction of the house fasteners for the sink, because it used to be built for ages and fasteners built into old places will be a strong and reliable option.
2. Try on the bowl. The gap between the plumbing and the washing machine should not exceed 2-3 cm.
3. When installing a common mixer with a bath, check that the faucet is free to move between the devices.
4. Mark and drill the holes for the bolts that will be used to mount the brackets.
5. Install the brackets.

Important! Bolts do not twist to the end, leave gaps of 5-7 mm.

1. Install the bowl on the brackets.

Important! To check how tightly the sink is installed, tighten any cord between the attachments and, if necessary, level the bowl.

1. Insert a metal hook( included) into the special production hole( on the far side of the bowl), with which the sink is attached to the wall.
2. Fix the sink to the wall using a hook and secure the hook with a screw or dowel.
3. Tighten the bolts that hold the brackets to the stop.
4. Treat the back of the shell with a silicone sealant.

Step # 2.Installing the

siphon Before assembling and installing the siphon, be sure to read the instructions:

1. Assemble the structure in accordance with the manufacturer's recommendations.
2. The siphon must be installed before the final fixation of the sink to the wall. Do this as follows:
   • The drain hose of the washing machine is connected to the siphon tube fitting for the washing machine.
   • Connect the fastener with a yoke to avoid breakage. Connect the corrugated pipe to the sewer pipe.
3. Check for leaks. If a leak is detected, then tighten all connections, and also check the availability and quality of the gaskets.

Step # 3.Installing the mixer

1. If the shell design provides for a mixer, then mount it in accordance with the manufacturer's instructions and recommendations in the hole located on the bowl.
2. Connect the equipment using flexible hoses and fittings.
3. After installation, perform a test run of the device, and in case of problems, trust the connections again.

Important! Use gaskets and a tape to seal the connections.

Installation of a washing machine combined with a sink is an excellent option for owners of small, narrow bathrooms, and a good solution for the competent organization of space in such a room. This combination will save you a free space that you can use for other needs. Correct selection of devices, as well as high-quality installation will guarantee a smooth and long-term operation of all equipment. The most important thing is that you can perform all the work on installation, selection, interior design yourself.