How to clean the steam generator from scale in the home?

Any self-respecting housewife tries to keep up with progress. Now there is not a single family that would be ironing without using a steam iron. It's no secret that any modern model has long functions as if it were a small computer, but in severe situations it is impossible to rely on it. One such situation is cleaning the steam generator. You say that your iron has a self-cleaning function? It's a wonderful function, but what to do when she can not cope? How to overcome heavy scum? Then it goes into reliable and trustworthy hands of the person. We'll figure out what you need to do and how to clean the steam generator from scale in the home.

to the contents ↑

What prevents ironing?

Violation of the operating rules of the equipment can lead to the following problems:

• Scale in the tank of the household appliance.
• Nagar on its sole.

Such defects will very quickly disable your steam generator, which will force you to search for a replacement. And if the iron has a complex design, the failure of the steam generator can lead to the replacement of the whole iron.

to the contents ↑

Cleaning the

steam generator This article will help you figure out how to clean the steam generator from scale. But first you need to know the exceptions. And where now without them?

What models can not be cleaned?

Steam generators can be classified into two types:

• Gravity. Comments on the work are superfluous.
• Pump models. Such models work under pressure. Steam is delivered in a more efficient way. Such electrical appliances have steam feed buttons, which are located on the body of the iron. These models can not be cleaned at home.

Important! To clean the latter, contact the service center. Do not attempt to repair the dirt yourself!

But gravity models are not so capricious, although their work is less effective. They can easily be kept clean and do not be afraid of breakage. Below we will talk about assistive means for care.

Citric acid

To cope with the scum inside the tank, dilute 30 g of citric acid in a liter of warm water and mix thoroughly. Next, you need to do the following:

1. Fill the tank with the resulting liquid.
2. Let it stand in the iron for about twenty minutes.
3. Turn on the device and set the maximum power.
4. Start stroking( you can use old and unnecessary things).Evaporate all liquid from the reservoir.
5. Fill the container with plain water. Turn on the iron for 10 minutes, then turn it off and drain all water.
6. Wash the container with water two or three times.

Important! In the absence of such at hand, you can use vinegar, diluting it with water in a proportion of 1: 1.This tool also helps you quickly clean the steam generator from scale in the home.

Antinakipin

This product has been used for years to remove scale from domestic appliances. It is sold in the form of gels, tablets and powders. On the package there are proportions for the dilution of the solution. The cleaning process is no different from the previous method. Some use simple mineral water for this purpose.

Tips

Cleaning the steam generator will save you from various defects on the walls of the tank, but you need to take care of it with extreme caution.

Important! It is worth remembering that in no case can you use hard brushes and unfiltered water for such a procedure, so you can damage the integrity of the container and the deposits will begin to appear only more intensively.

A careful attitude to the steam generator will save you from the need to purchase an expensive replacement.

to the contents ↑

How to caution yourself against scale?

There is no doubt that no one wants to overpay once again for something, if it can be avoided. It is not necessary to clean the steam generator daily. You can simply follow simple operating tips:

• Do not use unrefined water, because the salts and minerals in it lead to the formation of scale, use only filtered water or get distilled water. The formation of scale, in this way, can be postponed for six months. These precautions will prolong the life of your "household companion".
• If you have not purchased a new iron, but you know in advance that there will be a lot of work for it, get a model with a steam generator by the type of boiler. Such models very quickly heat up and produce a good flow of steam.

to the contents ↑

We get rid of the deposit

A special chemical pencil will save you from the deposit, which should be applied to the heated surface, wait for a while and thoroughly wipe.

Important! The substance of the pencil can close the steam holes or get into the iron container, which will lead to the breakdown of the household appliance. Use cleaning with caution!

With a little dirt, the aforementioned citric acid works well. For cleaning, you need to make a solution and apply it to the surface by analogy with a pencil. Citric acid is a variable in this procedure. It can be replaced with mineral water, toothpaste, household soap and even vinegar.

Important! Do not use hard materials to apply to the surface. So you can leave on the substrate defects in the form of abrasions and scratches.

And we will not forget, of course, that this is an electrical appliance, and the rules of basic safety precautions are applicable and mandatory for it.

Now you are fully armed to use a good steam generator for a long time and use it quickly and quickly put your things in order!