How to clean the heatpipe from scale?

The blessings of civilization are not a sin to use. Every day we have this opportunity, because these are irreplaceable helpers from cleaning the apartment to cooking. One such device is a thermo-stick. It does not matter what kind of quality you have and the manufacturer - sooner or later you will be faced with a fight with scum. Its formation is facilitated not by the quality of the material from which the thermopot was made, but the water hardness and the excess of potassium and magnesium salts in it. Therefore, the question arises: how to clean the heatpipe from scale, preferably quickly and with minimal effort?

If you notice that your indispensable assistant starts to behave not as newly acquired, then you need to understand the extent of the damage. And we will offer you several options how to clean the heatpipe from scale in the home.

to the contents ↑

Problems are different

The reasons for the formation of scale on your favorite devices are very simple and well known. Elevated levels of heavy chemical components, in particular potassium and magnesium, form solid deposits on the internal surfaces of the device when heated. As a result:

• When boiling your device produces uncharacteristic sounds, noises. Most likely the deposits have become layered on the heating element or have caused the "loosening up" of some of the details.
• When poured into a cup, water does not pour or pour, but only a thin stream. This means that the raid scored all the channels conducted.
• Your appliance is not heating up quickly. Scum on heating spirals or plates has a poor thermal conductivity and does not allow the liquid to boil as quickly as it used to.
• Inside the float particles of sediment.
• The thermopot began to consume more electricity than when it was purchased.

Now we'll look at how to deal with all this. You just need to choose a method, how to clean the heatpipe from scale, apply it and most likely the problem will be solved.

to content ↑

In war with scum all means are good

Ignoring the appearance of scale on an electrical appliance can lead to irreparable consequences. This is the obstruction of the fluid in the system, the failure of the pump and other parts.

Here are a few ways to clean the heatpipe from scaling at home, using folk remedies, so you can quickly fix the situation without leaving the apartment.

Method 1

All known universal products - soda + citric acid in tandem do wonders.

Application:

1. To begin with, add 25-30 grams of soda to the poured water and boil for 2-3 minutes.
2. After boiling, drain the water and repeat the procedure with the addition of 25 grams of citric acid.
3. At the end of the procedure, drain the water, thoroughly rinse the heatpot.
   

Method 2

Old grandfather mode is good if the situation is not critical. In this case, in order to clean the heatpipe from scale, proceed as follows:

1. For each liter of water, add 50-60 ml of vinegar.
2. Bring to a boil, leave for 2-3 hours.
3. After - drain the water, using a sponge, by rubbing, remove the scum.

Important! If the first time you did not achieve the desired result, repeat the procedure several times. This is one of the safest methods, so even repeated exposure to acids and alkalis will not cause any malfunctions in your technique.

Method 3

If, however, the situation requires the intervention of professional spetssredstv, then you can buy a store liquid descaling "REDD-TVN."This remedy gently eliminates the plaque of calcium, magnesium, which accumulates over time in internal parts and heating elements.

Important! The REDD-TVN product, despite its chemical composition, is safe and harmless not only for cleaning household appliances, but also for human health. According to the tests and issued certificates "Green Line", this production meets all modern standards of hygienic purity.

In the composition there are only inorganic and organic acids, inhibitors of corrosion, but there are no polyphosphates or other harmful, but chemical active for cleaning surfaces, joints.

How to use:

1. To make a working solution, take 1 tbsp.l.powder "REDD-TVN" mixed with 0.5 liters of cold water or warm. But not hot.
2. Stir thoroughly, pour this mixture into the kettle with water.
3. Boil for a few minutes, drain the water.
4. Several times rinse well.

Your thermopot will shine as new.

Important! The "REDD-TVN" product is universal and perfectly suited not only to clean the heatpipe from scale, but also to prevent or remove such a phenomenon in a conventional electric kettle, coffee machine, steamer, multivark, washing machine, dishwasher. There is even a separate line for cleaning toilet bowls and other sanitary ware.

Method 4

Using famous drinks - Coca-Cola, Fanta, Sprite, surprisingly everyone will make your heatpot no less clean than other folk remedies:

1. For this purpose, leave the beverage without the lid for a while - shouldexit the gas. You can shake a little, just neatly, because the drink is highly carbonated - you can lose half of its volume.
2. Then pour "Coke" to half a teapot and boil.
3. Drain the liquid, remove the debris residues with a sponge.
4. Rinse the appliance several times.

Method 5

From what only does not save us a cucumber pickle! Now we will not talk about a wide range of applications of this miracle-tool, but we will consider a specific case - how to clean the heatpipe from scale.

For application, you need brine from pickled cucumbers. Marinade contains vinegar, due to which purification takes place. Although brine from sauerkraut also suitable - it contains natural acid.

Clean according to the same principle known to you: fill it in a thermo-pot, boil for 20 minutes, wipe the walls with a sponge, then rinse.

We hope that with the help of our simple tips and folk remedies, you have been able to clean the hassle from descaling at home, and now your electrical appliance will serve you faithfully for many years.