- code F01
- problem F02
- lock F03
- value F04
- code F05
- lock F06
- code F07
- error Aristo F08
- F09
- unit F10
- signal F11
- lock F12
- code F13
- unit F14
- signal F15
- CodeF16
- Error F17
- Meaning F18
Modern washing machines have a special system that helps to identify faults. If you identify a breakdown or a malfunction, the display shows the alphanumeric code. Thanks to this, diagnostics become much simpler, it is easier to detect and correct a defect that has arisen. Let us consider in more detail the error codes of the washing machine Ariston.
to contents ↑Code F01
Occurs because of improper mounting in the drive motor control circuit. As a result, it closes. It is checked whether there is liquid on the combiner of the electrical controller. To eliminate such a malfunction, the electronic controller is replaced, and then the motor is replaced.
to the contents ↑Problem F02
The data on the rotation of the motor are not transmitted from the controller to the controller. The operation of the rotor is tested, since it is possible to jam the bearings of the drum, whether the connection between the motor and the controller is normal. The electrical resistance of the tachometer is also checked.
When using a time-varying drive motor, the connections and the harness are inspected. When troubleshooting the first thing is the replacement of the drive motor, then the controller.
to the contents ↑Locking F03
Similar errors of the washing machine Ariston indicate that the temperature sensor or TEN relay is broken. Resistance and contact connectors are measured, the controller, the temperature indicator is replaced.
to contents ↑Value F04
This code signals a malfunction in the operation of the water level sensor. The connections between the controller and the sensor are examined, if necessary, they change.
to the contents ↑Code F05
Error f 05 Ariston speaks of a breakdown of the drain pump. The reliability of the connection between the controller and the drain pump, the drain hose with the filter is determined.
In the presence of faulty parts, a drain pump, a water level sensor, and an electronic controller are required. Sometimes it is necessary to replace the drain hose.
to the contents ↑Locking F06
This code is used to display the key faults. The connection points of the wiring and the keys on the control panel are inspected. If necessary, the parts are replaced.
to the contents ↑Code F07
There was no immersion in the water of the tubular electric heater. The connections and the heater are called up, the resistance of the wiring is measured. All non-working items are replaced with new ones.
to the contents ↑Error Ariston F08
Indicates an empty tank or hang of the TEN relay. The work of the pressure switch and the contacts between the heater and the controller are checked. All faulty parts are changed.
to the contents ↑F09
Non-volatile EEPROM memory is defective. A memory chip or adjustment sensor is required.
to contents ↑Unit F10
The water level sensor does not signal the tank filling. The contacts connecting the connector, the level sensor and the controller are called. All non-working items are replaced.
to the contents ↑Signal F11
Like error f 05, the washing machine Ariston signals a malfunction with the pump. Either there is no connection to the machine, or a winding break has occurred. All wiring connections, pump and control module are checked.
to Contents ↑Lock F12
This error of the Ariston washing machine means that the controller and the indicating module have lost the relationship. The first thing to check the quality of the connections.
to Contents ↑Code F13
Broken temperature sensor circuit for drying. To solve the problem, the contacts connecting the sensor and the CAN connectors of the controller are checked. Defective items change.
to the contents ↑Block F14
I can not turn on drying clothes. Checking of the connecting contacts between the control sensor and the heating element of the drying element, each element, is carried out. If necessary, malfunctions are replaced.
to the contents ↑Signal F15
I can not turn off the drying. Contacts and items are checked. Faults - are replaced.
to the contents ↑Code F16
In this case, the unit signals the blockage of the drum, which is only possible in models with vertical tank loading. To clarify the breakdown of ringing contacts, check the connections and the serviceability of the lock on the door. A malfunction of the electronic control card is also possible.
to the contents ↑Error F17
The hatch door is open. A voltage check is performed between the contacts, a door lock microswitch, a control card connector. Also, the force of closing the door is checked, the broken elements are changed. Sometimes the cuff of the washing machine is changed, since it can interfere with tight closing.
to the contents ↑Value F18
Malfunction or incorrect operation of the microprocessor. A controller replacement is required.
From this article you learned what the "smart" washing machine Ariston signals to you if it shows one or another error code. We hope that the information obtained helped you to understand the cause of the malfunction and eliminate the problem in the shortest possible time.
