How to assemble a baby bed?

Arrangement of the children's room parents pay great attention, since it is very important that it is functional, safe and comfortable for the baby. The most significant place in the children's room is occupied by the bed, since in it the child will spend a lot of time. Therefore, it must be properly assembled and installed. If you act according to the instructions, then this process is not particularly laborious. Well, what to do when the store is not put or the operating manual in a foreign language and you can not do the assembly or installation yourself? To ensure that you are not caught off guard and you were ready for the arrival of your baby from the hospital, we will tell you how to collect a baby bed.

to the contents ↑

How to assemble and install a baby cot?

The process of assembly and installation can be divided into two stages: preparatory work and installation itself.

Preparatory stage of installation of a cot

Before starting the assembly and installation of a baby cot, it is necessary to perform a number of preparatory works:

1. Assembly is best done in the children's room. Thanks to this solution, you do not have to transfer it after the installation process.
2. After unpacking, carefully review all components. It is very important that everything is available. If something is missing, contact the store or manufacturer to get the details you need.
3. You should also carefully inspect the crib elements for defects. If you find something, then the crib should be returned, because it will be unsafe for a baby.
4. Strictly observe all the actions specified in the manual, as each model has its own significant differences and does not always fit into the general installation rules.

Important! If you lost the instruction, you should find its electronic version on the Internet.

Installation of a crib

The installation process depends solely on the type of crib. To date, the most popular are:

• Pendulum;
• Transformer;
• Rocking chair.

Next, we will consider in more detail each of the above types.

to the table of contents ↑

Bed-pendulum

The popularity of a cot with a pendulum mechanism is due to the fact that it creates oscillatory movements similar to the rocking of a mother in her arms. Such a mechanism is so sensitive that even with the turn of the baby it can start on its own, than it will help the child to quickly fall asleep.

Important! When installing the pendulum, you need to take into account the fact that near the crib there should not be anything to stand, because the mechanism can not swing and fully function.

Types of pendulums

There are several types of these cribs. Their difference lies purely in the direction of movement of the mechanism:

• Longitudinal pendulum. This is the most popular and popular option, because it is thanks to him that the effect of rocking on Mom's hands is created.

Important! Pediatricians claim that due to the effect of motion sickness of the mother's hands, the baby will have normal intracranial pressure, respectively - a complete absence of headaches in the future.

• Cots with a transverse mechanism in their shape resemble cradles, in which our ancestors used to rock the children. Like the old models, modern ones also make motor movements from side to side. Due to the presence of special latches, it is possible to stop the movement completely.

Important! This type of crib is best installed in small rooms, because due to lateral movements, they do not require much space.

• Universal cribs. They allow you to change completely the direction of the swing and its functions. That is, while the baby is small, it performs the function of the cradle, and as soon as it grows up - the walls are removed and the bed is lengthened. Most often in such models still put the changing table, which is certainly very convenient for moms.

Important! What kind of bed to choose - a transverse or longitudinal, highly individual choice. Parents themselves must weigh all the pros and cons. Also, when choosing, do not forget about the area that you are ready to allocate for its installation.

How to assemble a pendulum bed?

This type of baby cot is made entirely of natural wood, which is covered with water-soluble varnish. The package usually includes:

• Sleeper;
• Frame;
• Backrest;
• Feet;
• The pendulum mechanism.

Important! Very often, these beds are still equipped with a chest of drawers, swaddlers, shelves and drawers for storing laundry.

To assemble a baby cot of this model:

• Before starting work, prepare the crib elements, the assembly diagram, the screwdriver, screws and plugs.

Important! In order not to scratch the floor or the elements of the crib, put a soft light cloth on the work surface.

• Screw the fixed rear part to the side walls using the screws that come with the kit.

Important! Pay attention to the front and back of the bed, as they are almost the same and there is not much difference. But if you install them incorrectly, the mechanism will not function.

• Next, install the box. First, it is put on the screws, and after - inserted into the guides, which are located on the side walls.

Important! Sometimes in such beds the bed can be whole, or it can consist of several parts. In this case, they should be laid and fixed in the holes located on the back wall, located in a separate special bar.

• Turn over the fixed body in order to assemble the pendulum mechanism itself.
• Insert the laundry drawers inside and secure the side of the mechanism using special fixing screws.
• Close all the stubs.

to the contents ↑

How to assemble a transformer bed?

The choice and installation of such a model of a child's bed should be approached very seriously, as the child will sleep in it from birth to school age. Therefore, before buying should be weighed all the pros and cons.

The procedure will be as follows:

1. The bed-transformer "grows" with the child. Therefore, using a nightstand, which can be removed and mounted in the base of the bed, you will add about 50 centimeters of extra bed.
2. The width of the bed can not be added, it is 60 centimeters, so only 5-6 year old children will be suitable.
3. Unfortunately, the material of manufacture is not always a tree. Therefore, when choosing, you should be vigilant.
4. The structure of the bed is fully provided for a comfortable rest and a healthy sleep for your child.
5. The presence of a built-in locker allows you to store all the necessary things at hand.
6. Additional functionality and convenience in use adds to the availability of a changing table.
7. The price of such a model depends solely on the material from which it is made and its configuration.
8. Parents should always consider the fact that it is much larger than a regular cradle.

Important! Pay attention to the manual that the manufacturer invests. It always has a detailed layout of the transformer bed, thanks to which the installation process will be much easier.

Assembling of the transformer bed:

• Place where you work, cover with paper or a light cloth.
• Fix the bottom of the bed. For this, it is necessary to assemble the frame - backs and lower sides.
• The first thing to do is to attach a fixed wall using the screws provided.
• Assemble the box and insert it into the grooves on the side panels. Secure with screws.
• Install the facade wall and secure with screws.

Important! When installing the front wall, be careful, since it must be stationary.

• Assemble the cabinet. Using cogs, attach it to the side of the small cot.
• Assemble the bottom of a small crib, attach the side grilles.
• If the bed is on castors, then they should be checked beforehand and then installed.
• In case there is a pendulum mechanism, it should be assembled and installed.
• Assemble the laundry boxes.
• Next, attach the side wall and install the laundry boxes in their place.

to the contents ↑

How to assemble a baby cot?

To date, this type of bed is the most in demand. This is due to the fact that parents have always the opportunity to pump up their baby so that he calms down and quickly falls asleep. Due to special curved supports, the cot will start to swing even from the slightest movement of the child.

Mounting the rocking chair does not take long, as all the holes for the fasteners are ready - you do not need to drill them.

Important! Most screws for fastening are included, but sometimes there are situations when they simply do not have enough. In this case, you can replace them with similar ones with exactly the same diameter.

Assembling of this bed is carried out in several stages:

• Using self-tapping screws, assemble all the elements of the boxes.
• Next, you need to assemble the side parts and the bottom. During this process, moderate physical strength must be applied.

Important! Since the newborn baby does not have the skills of sitting alone, the bottom should be fixed higher. Thus, it will be easier for Mom to get it out of the crib.

• Screw the rear wall to each side. This should be done with the help of self-tapping screws.
• Install the front wall in the grooves on the side panels, firmly tighten the fastener.
• Install the bottom drawer.
• Many rockers are also equipped with wheels. Mount them can be only at will.

Important! After completing the assembly, carefully check its correctness and the absence of various protruding parts, which the child can be injured. The cot should swing, and the bed - firmly and securely fixed.

The appearance of a child in the family is an incredible joy for parents. Accordingly - all work on the preparation of the children's room for the arrival of the baby is held with particular enthusiasm and scrupulousness. In particular, this applies to a baby crib. Therefore, it is very important that it is comfortable for the baby and functional for the parents. Using the above tips and recommendations of experts, you can easily collect a crib of any complexity in a short time and already in full "combat readiness" to meet your favorite child!