Children's desk with their own hands with drawings

Children's furniture is always in demand. When you buy it, each parent pays attention to the material from which it is produced. Particularly popular are the sets made of natural wood. However, the cost of such furniture is always above average, and not every buyer can buy it. Today we will consider what a children's desk can be like. With drawings and the necessary inventory will be easy to understand. We will tell you how to make comfortable furniture with minimal knowledge, lack of experience and a small amount of money.

to the table of contents ↑

A small desk made of natural materials

The children's desk is an obligatory attribute for teaching children. This accessory furniture can be not only in school, but also installed at home. At the same time, in order to produce it, there is no need to spend huge sums of money.

Important! To make a children's desk with their own hands, it is necessary to understand the drawings from the very beginning, and on the basis of them to purchase all the necessary components. In fact, all the patterns of "patterns" of furniture are identical to each other and can differ only in the size of the desk.

Materials for work

For the manufacture of desks in the home, you must have:

• confirmations;
• self-tapping screws;
• loops for pianos, length 50 cm;
• corners of metal;
• sandpaper;
• sawed from plywood according to the drawing;
• screwdriver;
• fret saw;
• grinding machine.

Assembly instructions for the table:

• All cuttings from the plywood pattern must be treated with sandpaper. Achieve the best possible result. Let them be more smooth and less uneven. To perform this operation, you can use a grinder or similar machine.

Important! When sanding wooden surfaces with sandpaper, this operation must be done in three stages. At the first stage, the treatment is carried out with P40 grains, then with P120 and P220.In this case, you will achieve the best result.

• All sharp corners on the furniture blank should be rounded using a jigsaw.
• For convenience, we advise you to cut the semicircular notches in the lateral parts of the future home desks. They are necessary in order for the child to sit more comfortably and learn the lessons.

Important! When forming this design, your child will not rest on his knees when turning, he will not be disturbed by the sharp corners of the table.

• At this point, you need to attach the legs to the bottom of the drawer. This operation is done with the help of confirmations. Before this, it is necessary to drill holes for these fasteners.
• Now it is necessary to lower the bottom eight centimeters lower than the edge of each leg.
• Fix the front wall of the resulting blank.

Important! It should be noted that the upper edge should be at the level with the legs. This is necessary to ensure that the structure is almost flat and perfect.

• Use a screwdriver to attach the screws to the back of the workpiece. At this stage you will get a ledge. It will be several centimeters higher than the edge of the legs of the structure.
• Use piano loops to fix the table top. After you secure this piece of furniture, you will have a box in which you can store various items for lessons, drawing or other items.

Important! We draw attention to the fact that:

• the child should easily lift and lower this structure;
• it should move without sticking and embarrassment;
• surface must be flat when closing the countertop.

Partha for the schoolboy with his own hands ready! Now you can start making a chair.

Important! Partha for the schoolboy with his own hands is very easy. With minimal knowledge, great desire and a small amount of money for the purchase of basic materials, you can make an excellent piece of furniture for your child.

to the contents ↑

Make a chair for a desk at home

If you make a children's desk with your own hands, with the drawings you have figured out and made the whole design, then you can start making a chair. Moreover, in the schemes for the manufacture of furniture for schoolchildren this accessory is present.

So:

• At the first stage, you need to cut out the details for the child chair according to the drawing.
• Then clean out any irregularities and round off the corners.
• We collect the chair, according to the sketch.
• All parts are attached to each other with a screwdriver and confirmats. We advise you to fix as much as possible all the details, especially the backrest and the crossbar under the seat, as all children like to ride on the legs of the chair.

Important! If desired - you can give a unique design to the chair. For example, cut out this or that figure on the back of the chair. For example, a heart, a circle or a flower. Do this with a jigsaw.

• The final stage in the manufacture of school desks for the schoolchild with their own hands, together with a chair, is varnishing.

Important! We recommend to give preference to acrylic lacquer. It is absolutely harmless, odorless and dries quickly enough. Cover all surfaces in two or three layers.

to the contents ↑

Making a table, adjustable in height, with your own hands for school children

If your child went to school, then one of the most important problems that parents face is the choice of school desks for the child. This question applies to furniture installed at home. We suggest you make a table, adjustable in height, with your own hands. It has a large number of advantages compared to other pieces of furniture for teaching lessons and the cost of this desk is quite low.

Important! Making an adjustable table allows you to change the height of the tabletop from 57 to 72 cm, with a step of 5 cm. In addition, you can change the angle of the table from 0 to 90 degrees. The last parameter is theoretical, the adjustment step does not exceed 5 degrees.

The Ministry of Health recommends that the angle of the desks vary depending on the purpose:

• for drawing use 0-5 degrees;
• letters - 10-15;
• for reading - 20-30 degrees.

Materials for work

For the manufacture of a table with height adjustable hands it will be necessary: ​​

• base;
• lifting mechanism;
• countertop.

Important! The desk with adjustable table top is made of planed wood. This material will need to be previously sanded, as described in the first part of this article.

Instructions for collecting adjustable table:

1. We buy planed timber.
2. Surface grinding.
3. According to the design on the guide board, we milled a special groove. Its size is 1x1 cm.
4. We round all the sharp corners on the structure. This is best done with a grinder. Possible the execution of different sandpaper.
5. We connect adjustable countertop. For this we need threaded studs, nuts and washers.
6. Attach the upper shelf and stand under your feet with the help of confirmats.
7. The lifting mechanism is manufactured according to the drawing.
8. Two grooves measuring 1x1 cm must be milled on the lifting mechanism. Four holes with a diameter of 2 cm are drilled in the center of the surface.
9. When assembling the structure, the lifting mechanism must be inserted into the base, then fix the table top. This is done with the help of studs, nuts and bolts.

The table, adjustable in height, with your own hands is ready!

Making a children's desks with your own hands with drawings and with all the components, it does not take you much time, money and energy. In doing so, you will make an object that will be safe, beautiful and loved for your child!