How to glue a mirror to the cabinet door?

click fraud protection
Contents:
  • Selecting the methods and means
  • Algorithm for gluing glass with double-sided adhesive tape:
  • How to glue a mirror on a cabinet: using silicone
  • Applying metal legs or stops from plastic

Many people are interested in how to glue a mirror to the cabinet door? It is this element that can transform the interior, make the atmosphere more cozy and spectacular. At the same time, you can choose a piece of furniture immediately with a mirror. But it will cost unequivocally more expensive, and the form, its dimensions may not exactly meet expectations. Therefore, the issue of independent installation of mirrors on cabinet doors remains urgent.

to the contents ↑

We select the methods and means of

There are 2 ways of gluing them on furniture:

  • With two-sided adhesive tape.
  • On silicone.

Specialists recommend buying mirror products reinforced with a special protective film on the reverse side. Such a surface, even if broken, does not crumble into pieces. The probability of injury is minimal.

Important! It is undesirable to apply "liquid nails" and other adhesives reminding the "Moment" glue by the smell for sticking. These formulations contain substances that can damage the amalgam.

So, how to fix the mirror on the cabinet door?

to the contents ↑

Glass gluing algorithm with double-sided adhesive tape:

  1. Stick adhesive tape around the perimeter of the glass on the reverse side.
  2. Apply additional strips of adhesive tape at the same intervals.
  3. Before gluing the mirror product to the furniture surface, mark the place where it will be in pencil. After that, you can stick.

Important! Do not use this method for large items. There is a possibility that the adhesive tape will become unstuck and the glass will break. Especially this risk increases in the summer heat.

to the contents ↑

How to glue a mirror on a cabinet: using

silicone Compared to the method described above, this is more reliable. If you choose what to glue the mirror to the cabinet, give preference to this method. The procedure is as follows:

  • Remove the door from the furniture, lay it on a horizontal surface.
  • Mark the place where the product will be attached.
  • Wipe the surface of the door and the glass on the back of the solvent. This is necessary for degreasing. It is advisable to use for this purpose textiles that do not leave fibers and threads.

Important! Before applying the adhesive, wait a little to allow the degreasing compound to completely evaporate.

  • The best option for gluing is a construction colorless silicone.
  • Apply silicone adhesive for the mirror to the cabinet on the back of the mirror. Take care that it does not get on the clothes and face of the product. Do not lubricate the entire surface with silicone. Apply it in strips at the same intervals.
  • Place the longest edge of the product along the previously marked line. Lower the product so that it does not move relative to the marking lines. For this reason, it is advisable to carry out the work on securing the mirror to the door of the cabinet together: one - gently applies the glass, and the other - controls that it sticks within the marking lines.
  • Before hanging the door back, wait until the silicone has dried.

Important! While the gluing agent is not frozen, it is possible to slightly shift the surface in the right direction.

to the contents ↑

Use of metal legs or stops made of plastic

In this case, as in the described versions, the glass is attached to the door, previously removed from the hinges and positioned horizontally. If you use the feet of metal, first check their height, so that the feet provide a close fitting of the glass to the furniture. If necessary, use the lining under the feet. After you have screwed them on the markings, install the glass and press with your paws. Done!

Now you know what to attach the mirror to the cabinet. The work is not too complicated, but it requires accuracy and accuracy.