- Kinds of soles
- How to remove dirt?
It is impossible to imagine the life of a modern person without ironing. This subject is in almost every house. However, sooner or later, dirt appears on its sole, which can spoil things when ironing. Since the problem is relevant, a large number of methods have been experimentally found, how to remove from the iron the ignition at home. We will now consider them.
to content ↑Kinds of
soles Before choosing one of the methods, it is necessary to understand what kind of sole is available for your ironing device. Also, what kind of pollution plays a big role.
Enamel
An iron with a sole made of enamel slips easily with ironing. Enamel surface is the simplest in purification.
Steel and Aluminum
In most cases, the coating is made of stainless steel, aluminum or their alloy. Such popularity is explained by the high thermal conductivity of these metals. True, there is this kind of sole and minus - sometimes the fabric can stick.
Titanium
The titanium coating consumes much more energy when ironing, as this material has a lower thermal conductivity. The biggest plus of the titanic soles in its long operational life - scratches and damages are not terrible.
Sapphire
Sapphire sole( made of abrasive chips) is very similar to the titanic outsole. It also tolerates scratches, chips and other damage. That's why when cleaning you can safely use even a metal brush.
Teflon and ceramics
Ceramic or Teflon outsole is quite fragile, can easily get strong damage. That's why you need to be extra careful when dealing with it.
Important! These materials - not the best when choosing an ironing device, if you suffer from forgetfulness or inattention.
The most important thing you need to know when using an iron made of ceramic or Teflon is that the use of abrasive agents and metal brushes is prohibited when cleaning, as they scratch the surface very hard. To clean this kind of sole, you need to dissolve the dirt, and then remove it with a foam rubber sponge or a soft material material.
to the contents ↑How to remove dirt?
Basically, the dirt on the iron is in the form of carbon deposits, burnt matter or plaque. It is necessary to clean them as soon as possible without delaying the situation. So the process of purification will be much easier and more effective. Next, you need to select one of the methods below.
Acetone
The first way to clean the surface of the iron from the stash is with the help of a nail polish remover, which is sure to be found in every girl. Use a cotton pad or a small cloth flap to process the soleplate of the iron. As soon as the result is achieved, wash it with warm water and soap.
Blade and clean rag
If the cloth burns into the iron, it is necessary to start cleaning it as soon as possible. A help in this is a wooden or plastic spatula and cotton fabric. To do this, heat the ironing unit to the maximum temperature and scrape off the scald with a shovel, then remove it with cotton cloth.
Baking soda
One of the most effective and effective methods is baking soda. Having mastered this method, you will never again wonder how to clean the iron from the mold on the sole at home.
In fact, nothing is complicated:
- Mix soda with a little warm water.
- Rub the gruel onto the soiling area until it finally disappears.
Important! This method is not suitable for cleaning surfaces prone to scratches and other damages.
Household soap
Household soap is a universal tool for cleaning various stains, including on the sole of the iron:
- Slightly soak it with water and thoroughly soap.
- After - it is necessary to heat the ironing device as much as possible.
- Turn it off and wait for the soapy layer to cool.
- As soon as this happens, the soap should be very easy to remove together with dirt.
Special tool
As an option - you can purchase a special tool. In the industrial shops, various options are available for sale. One of them is a pencil for cleaning the iron.
All you need to do is spread a surface with a pencil and heat it as much as possible. Once the iron cools down, all dirt will be very easy to remove.
How to remove carbon deposits from the iron with vinegar?
You can use vinegar to clean your ironer from scale and other dirt. It is used to cleanse many kinds of contaminants.
Treat the sole with vinegar and leave for a few hours, then rinse with soapy water.
Important! For greater efficiency, you can add ammonia to the vinegar.
Matches The best iron cleanser from a burn-in-the-match. They are guaranteed to be in your home. In order to use this method, it is necessary to heat the iron and rub its sole with the sides of the matchbox( where there is sulfur).
Important! This is one of the fastest ways.15 minutes from the mud will not remain a trace.
How to clean the iron with toothpaste?
One of the safest methods is using toothpaste. It is perfect for cleaning ceramic or Teflon surfaces.
Apply the paste on the iron and heat it, then allow it to cool down - it will not be difficult to remove the dirt.
Important! Use only pure white toothpaste, without abrasive, colored granules.
Make sure that there are no difficulties with cleaning the soleplate of the iron, and for this purpose even the most unexpected means are suitable? Now act, and in the future be more careful when ironing, especially synthetic, woolen and any other fabrics prone to melting.