Fungus in the house - how to get rid?

In case of mold and fungus in the house, how to get rid of unpleasant phenomena? Microorganisms often hit the walls and flooring of a wooden house, which causes a lot of trouble to its residents. The tree on which the fungus began to appear loses its attractive appearance. And the formations themselves negatively affect the health of all household members. Proceeding from this, to eliminate mold and fungus on the surface of the tree follows immediately, until it spread throughout the house.

As soon as you notice on the walls and floor white, vata-like formations or white fluff, without losing time you need to find the reason for his appearance and the places in which he settled. If for some reason you do not do this, later on, the yellow, purple and pink traces of the fungus may appear on the tree, which in time will be covered with a gray-silvery film. It is almost impossible to eliminate such formations.

to content ↑

fungus species If a fungus develops in the home - its consequences and how to deal with it, not everyone knows. And while for wood products, any kind of fungus is very dangerous. They contribute to the destruction of wood fibers. In the end, if the harmful formations are not eliminated in a timely manner, a house made of wood can completely collapse to the very bottom. Spores of fungi can spread both through the air, and be carried on clothes or animal wool.

Important! In ancient times, buildings infected with this type of pest were burned to protect other structures from the defeat of this "disease."

White house mushroom

It helps to destroy the structure of the tree, change its color and the appearance of cracks.

Blue fungi

When these formations appear, the wood acquires a gray-blue tinge. Bacteria destroy the lacquer and paint. Thus, moisture gets into the products.

Rotting fungi

There is wet and dry rot:

• Wet damages raw wood that is near the ground or downspouts. Affected products become loose, they form dark lines.
• Dry, in turn, manifests a reddish dust in the corners and quickly multiplies in a humid environment. On the tree appear gray stripes, destroying the fibers of wood.

White and black mold

This kind of microorganisms can form not only on wooden surfaces. Stone, concrete tiles and various fabrics can become a place for the emergence and active reproduction of fungus. In addition to the destructive effect on different materials, mold is very harmful to human health and animals. Therefore, if there was a fungus in the house - its consequences and how to deal with it still need to be clarified, and as soon as possible.

Actinomycetes

They help soften the fibers of the tree, which can subsequently lead to the destruction of the structure.

to the contents ↑

Causes of the appearance of the

fungus Methods how to fight a fungus in a wooden house will be useful not only to people who live in a private house and wet or marshy areas. Sometimes in apartments the fungus can appear, at first glance, from nowhere.

Many people ignore the presence of an unpleasant smell or black corners in the room and simply re-paste the wallpaper or rest the floor. Wet green or blackened cellar walls do not become a hindrance to food storage. And the appearance of a shortness of breath, headache and other diseases is mostly written off for weather or age.

To prevent fungus from damaging the health and finishing of the room, it is better to prevent the appearance of it in the house. This is much easier than dealing with the consequences. To avoid harmful disputes in your home, you should know the reasons for their occurrence.

The main reason for the appearance of the fungus in the house and you think how to get rid of it - moisture from the ground or increased humidity in the undercoating:

• Dampness penetrates through the floor covering and infects the walls with a fungus.
• Raw apartments on the ground floors in multi-storey houses are an excellent habitat for toxic mold spores.
• Insufficient room ventilation contributes to the appearance of dampness.
• Breeding in small rooms of many indoor plants that require constant humidity.
• Improper use of air humidifiers also causes mold.

to the contents ↑

How to get rid of the fungus in a wooden house under the floor?

If you have a fungus in the house, before you look for methods, how to remove it, you need to eliminate the cause of its occurrence. Otherwise it will appear again and again. Mold extraction technology in a private home is not based solely on wet cleaning and removal of visible contaminants. One of the main conditions for obtaining a successful result is the establishment of such a climate within the premises, in which the fungus can not appear.

For this:

• First of all, it is necessary to remove the fungus, rotten and rotten parts of the tree.
• Separate areas should be cleaned of the fungus with an ax or plane.
• Things and furniture that can not be cleaned have to be sent to the trash can.
• Remove the top layer of ground from the underfloor. Fungus on the wooden floor and walls, indicates the infection of the ground under the floor.
• To prevent the fungus from spreading, pour the perimeter of the underground with the following solution: mix dry clay, lime, gravel and grout. Tightly tamp the remedy.

Important! The distance from the floor to the ground must be at least 30 cm. The logs on which the floor boards are fixed should not touch the ground.

• Make sure that the floor has good ventilation. To do this, install special grilles or strips.
• It is necessary to reduce the humidity level in the room. To do this, open the windows frequently in the room so that the air in the room does not stagnate.
• All affected remains of the tree must be burned over the fire.
• The cleaned surface is treated several times with chemical mixtures.

to content ↑

Solutions for processing wood contaminated with fungus

For a long time exhausted by the question of how to remove fungus in a wooden house? All the actions taken were in vain? One of the means from a huge assortment of antiseptic drugs, which can be found in construction shops, will come to the rescue. It will help to effectively eliminate the fungus in a wooden house. How to get rid of the unpleasant smell and the remains of mold, we will discuss later in this article.

Important! Remember, all means for removing fungal contamination are harmful to health. Therefore, take care of personal safety measures and before using, be sure to read the instructions.

The most effective means to combat fungus, the owners of private homes consider the following mixtures.

Antiseptic primer

One of the most effective means to eliminate fungus in the room is antiseptic primer. This drug has such properties that eliminate the fungus and prevent its appearance in the future.

How to use:

1. Before applying it to the surface, clean the affected area.

Important! If you are processing a plastered surface, clean it up to a clean layer.

1. Antiseptic should be applied to a clean, dry surface with a uniform layer using a paintbrush or an atomizer.
2. Leave the primer to dry on the surface of the wall.
3. After the treatment, you can glue the wallpaper or paint the surface with paint.

Important! As a rule, do not dilute the primer with water. But if you purchased an undiluted mixture, then follow the recommendations on the packaging to get the right consistency of the solution.

Bleach

Means that can be found in home life also work well to remove fungus from the surface. It is important that all these drugs are not so toxic and cause less harm to human health. The bleach includes sodium hypochlorite. This substance effectively eliminates the fungus and all its controversies. Use bleach can be safely on any surface.

Important! The only drawback is that the application on colored surfaces can lead to their discoloration.

How to use:

1. Dilute the bleach in water at a ratio of 1:10.
2. Treat the areas affected by the fungus.

Important! Wear rubber gloves to protect your hands.

Vinegar

Table vinegar can easily be found in the kitchen cupboard, and it does not have such a specific smell as bleach. Fighting mold in a wooden house with the help of vinegar does not take much time, and the result will pleasantly surprise you.

How to use:

1. Apply vinegar to the area contaminated with a fungus with a damp cloth or with a sprayer.
2. Leave on the surface for about an hour.
3. In the end, rinse the product with water and ventilate the room.

Important! To prevent the appearance of fungal deposits, treat the walls and floor with vinegar every week.

Ammonium alcohol

Look for methods how to remove the fungus on the floor in the house? To do this, find ammonia in the pharmacy cupboard. As well as the means we proposed above, ammonia will eliminate the fungus's traces on a non-porous solid surface effortlessly.

How to use:

1. Mix ammonia with water in equal proportions.
2. Apply to the affected area using a nebulizer.
3. Leave on the surface for a while to achieve the best result.
4. After the time has elapsed, rinse out the ammonia with a damp cloth dampened in clean water.

Important! Do not mix two different products with each other. For example, a mixture of bleach and ammonia emits toxic fumes.

Soda baking soda

Soda is a versatile product. Unlike other products, soda does not contain aggressive chemicals, respectively - it does not harm human health. With it, you can easily clean household items and eliminate the fungus on the boards. How to deal with this kind of pollution with soda?

How to use:

1. Dilute one teaspoon of soda in a glass of water.
2. With the fluid obtained, treat the damaged areas. Use for this purpose a spray gun or a clean rag soaked in a solution.

Important! If the soda is not washed off the coating, it will create a protective barrier that will prevent the recurrence of fungal formations.

Sodium Fluoride

You can buy sodium fluoride in a hardware store. Sodium fluoride has a powder structure of white or grayish color, and is an effective means for eliminating the fungus from the surface of the tree. The technology of using this remedy to take out the fungus in a wooden house is somewhat.

Method # 1:

1. Mix 30 grams of raw material and 1 liter of hot water.
2. Stir thoroughly.
3. Use a brush or spray gun to treat the damaged surface with a hot solution.

Method number 2

There is another way how to get rid of the fungus in a wooden house with the help of sodium fluoride.

The consistency in the form of a paste is used:

1. 150 grams of sodium fluoride should be carefully diluted with 200 grams of water.

Important! The amount and proportions of the paste depend on the area affected by the fungus. In this case, the proportion is calculated per one square meter.

1. Add the clay to the resulting mixture, through a sieve and mix until a homogeneous mixture is obtained.

Important! Watch for consistency means, it should be like paste.

1. With the paste obtained, treat the most damaged parts of the tree.

Important! An alternative to sodium fluoride in this case is copper or iron vitriol.

to the table of contents ↑

How to get rid of the fungus on the floor in a private house:

1. One of the means described above can be used to clean the flooring.
2. Apply to the surface with a brush or mop, small areas are sprayed.
3. With the selected product, cover the floor covering and leave for 10-15 minutes.
4. After the time has elapsed, brush the floor.
5. The procedure should be repeated several more times.

How to clean the parquet from mold and mold:

1. To clean the parquet from harmful formations, first remove the stale mold with a vacuum cleaner.
2. Remove the damaged parquet from the corner of the room.
3. Treat the coating with the selected product and allow to dry for several days.
4. Accelerate this process by turning on the air conditioner or heater.

Important! When processing with a composition of borax, you prevent the recurrence of fungal formations.

1. Plinth in the room will have to be replaced.

Removing the fungus - step by step instruction:

1. Free the premises from clothing and household appliances, so that the fungus does not spread around the perimeter of the housing.
2. Things damaged by the fungus are immediately sent to the trash.
3. Carpets, furniture elements put out in the sun, their processing will be done later.
4. Enter the room with a film, fixing it on the door with adhesive tape.
5. Open the windows that are in the room for better ventilation.
6. You can speed up the ventilation by using a fan. Install it on the open window.

Important! Do not direct the fan to the affected places, in order not to spread the fungus around the room.

1. Remove the damaged coating from the walls and floor.
2. If the fungus does not affect the whole area of ​​the room, remove the most polluted places and 50-70 cm in the contamination radius.
3. Carpet damaged by the fungus is removed together with the blind boards. To do this, it is sufficient to prune it and tear it from the base.
4. Treat the floor with the selected tool.

Important! To my great regret, carpet and linoleum are not subject to recovery - they will have to be thrown away.

Different kinds of fungi and mold accompany humanity throughout life. The problems of the fungus in the house, its consequences and how to deal with it became problems not only for private house owners. Owners of apartments suffer not less from occurrence on a floor and in corners of dangerous formations. They have a destructive effect on the human immune system, cause chronic diseases, asthma, pulmonary tuberculosis and other complicated inflammation of the respiratory tract. The advice given in this article will definitely help to get rid of and never again encounter such toxic formations in your home.