Badly flushes the toilet - what to do?

no matter how hard we try to equip our house with only the most modern and reliable equipment, but even it is not eternal and may break with time. It deals with such an important equipment in any home, like a toilet bowl, and more often than not it just stops washing normally. In this matter, you need to understand in detail and understand why it's bad for the toilet, what to do in such cases and how not to bring the equipment to such a state. After all, when the toilet is broken, everyone has to worry, because we use it often enough and every day, and without it it is simply impossible to exist normally in any home. So, let's look at the reasons why the toilet is not washing off well.

to the contents ↑

Features of the design and operation of the toilet "Compact"

It was in the days of the Soviet Union that the most compact toilet version was invented, which occupied a minimum of space and was sufficiently multifunctional. Since that moment in our life such plumbing models as WC's toilet bowls have become firmly established. Even today, this model remains one of the most popular.

There is a toilet bowl compact of such details:

• Bowl.
• Flush tank.
• Fittings.

Important! You can install such a device in any apartment, even with the smallest bathroom. It belongs to the category of floor toilets and is attached directly to the floor. Therefore, all the load falls on the floor, which holds both the mass of the machinery itself and the person sitting on it.

But unfortunately, it happens so often that such a toilet is not washed off well. The reasons for this unpleasant phenomenon are very logical and completely solvable.

Important! Problems arise with the care of such a system, because the tank itself is quite large and it is inconvenient to approach it. Such a design must be completely kept clean, including sewage and communication pipelines.

Why does the toilet begin to wash off badly?

There are a lot of sources of this kind of trouble - the cause of insufficient flushing can be serious failures, as well as imperfect design of the drain system or bowl.

Important! In private homes, such problems occur more often due to errors made during the planning of the sewage system.

Now consider in detail every possible cause of such a breakdown.

to the contents ↑

Discharge in the toilet bowl

The fact is that the tank receives the most ordinary water, which contains mineral salts. They have the property of depositing on the walls of the tank and accumulating on its working elements. These growths are called calcareous deposits or hardness salts.

Since the drain hole is not too large, it clogs fairly quickly and the water starts to slowly pass, causing the toilet to wash off badly.

You can solve this problem in two ways:

• Leave in the tank not more than a liter of water and pour in a hundred gram of 5 or 7% solution of orthophosphoric acid, wait fifteen minutes and wash the water.
• Pour half a liter of borax and the same amount of vinegar into the water remaining in the tank, and after two hours, wash everything off.
• You can also add four sachets of citric acid to the tank and wash it off after a few hours.

Important! Always use rubber gloves and a respirator when handling acids.

Useful advice

To prevent such clogging more, it is possible to install a cleaning filter at the water inlet or periodically pour into the tank special pills that soften the water and clean the entire drainage system.

to the contents ↑

Water is not fully recruited or absent

If the water in the tank is too small, naturally, it is impossible to produce a full sink and the reasons for this are:

• The float may shut off the valve too soon. To fix this problem, it is necessary to tighten the screw that regulates the work of the float to the end.
• There is a clog between the drain hole and the petal, so that the water just drains completely into the toilet bowl, and does not accumulate in the tank. In this case, it is necessary to disassemble the fitting and clean the plum properly from plaque and debris.
• Rubber elements over the drain have become too stiff. In this situation, you will have to replace the worn parts.

Important! If you have done everything as indicated above, but the problem has not been resolved, you should definitely call a specialist.

to the contents ↑

The toilet bowl flows

This problem can be eliminated, but this work is quite painstaking and troublesome. First you need to understand why the toilet is badly flushed in this particular case, and only then deal with the problem:

• The pear saddle is clogged. In case of such a breakdown, you just need to remove all the garbage.
• The pear was worn out or deformed. Here it is necessary to replace the pear with a new one, of the same design.
• Steel bolts have become unusable. That's why water can flow to the shelf through the hole. In this situation, you either need to completely replace the entire system or install new bolts.
• The float has deformed. That is why he can pass water because of his great weight. You just need to change it to a new one.
• The siphon membrane may be damaged. It is very easy to fix the situation by purchasing new membranes.

to contents ↑

The bowl is filled during the flushing of

If the bowl becomes filled with water when it flushes, there are likely to be sewage problems. Solve the problem as follows:

• Use the plunger and eliminate household blockage by creating hydraulics inside the toilet. Due to the movement of air, the accumulated dirt will come out.

Important! This option is not always suitable, because how often dirt accumulates in joints and on the walls of machinery.

• Different chemical compositions can be used. But the main thing here is to strictly follow the instructions, because it is easy to damage plastic or steel pipes with chemicals.
• The plumbing cable will come to the rescue. This is almost an extreme measure. It consists of a metal wire, which looks like a spiral. At one end there is a hilt, and on the other - a ruff. Its length reaches three meters and this is enough to eliminate blockage at a great distance.

to the contents ↑

Damage to the enamel

It often happens that the toilet starts to wash off water badly due to damage to the enamel covering the ceramic. The fact is that the cracks, roughness, chips do not give waste to life to freely flow into the sewage system when it flushes.

Important! Help here can only replace the toilet, because how to repair it inside is almost impossible, in particular with their own hands. In addition, it is expensive - it is easier to update the plumbing completely.

to the contents ↑

The sewerage system

is incorrectly planned. In a private house there is also often a situation when the toilet is not washed properly. What to do in this case? To understand, first of all, how well the sewage system was installed, whether all the norms were observed at the same time. It is because of the technical omission that water can slowly escape, and the products of vital activity will not be washed to the end.

There are several reasons for this, so each of them needs to carefully study and understand how to solve the problem:

• Incorrect bias of the background pipe, which is responsible for the ventilation of the sewer pipes.

Important! Unfortunately, this situation can not be remedied, it is necessary to completely redo the entire system or install an electric pump for forced drainage.

• No background riser. Because of this, air congestion starts to form, and water is not able to flow evenly at the required speed. This problem can be solved by installing a vacuum valve or by installing a special pipe that is directly connected to the roof.
• Incorrect connection of the toilet. Such a malfunction is easy to solve, you need to check everything again, find out what mistakes were made during the installation, in order to quickly eliminate them.

to the contents ↑

Unsuccessful construction of plumbing

If a completely new toilet is badly flushed, the reasons for this are usually due to its special design. For example, models having a bowl with a shelf are considered the most unsuccessful, since they are characterized by a bad drainage of water.

Therefore, it is better to buy toilets with a circular flushing system, so that the water would drain simultaneously from several holes under the rim, thereby washing the entire bowl completely.

The listed reasons for insufficient flushing in the toilet bowls are not serious and completely eliminated - there is no need to attract specialists to work. The main thing is to follow all the recommendations and do everything slowly.