Replacement of heating elements in the washing machine

The design of each modern washing machine assumes the presence of a heating element, which is responsible for heating the water and maintaining its specific temperature during the washing process. Therefore, if your household appliance stops heating water, you will most likely need to replace the heating element. In this article, we will tell you how to replace the heater in the washing machine and what factors can lead to its breakdown.

to the contents ↑

Symptoms of a fault in the heating element of the

If the washing machine has stopped heating the collected water, this is not the reason for stopping the appliance. In this regard, users often can not immediately diagnose the presence of a malfunction.

About the need to replace the heating element in the washing machine is often indicated by the following signs:

• The laundry after washing has an unpleasant smell.
• The glass of the hatch remains cold during the operation of the stylus.
• Stains and dirt remain on the washed laundry.

Important! Problems with the heating of water in your stiralki indicate a malfunction of the heater, but the reasons for its breakdown may be different.

The reasons for the breakdown of the heating element of the washing machine can be quite a lot, the most popular of them are the following:

1. Short circuit of the heating element. In this case, the washing machine almost immediately ceases to function, since there is an increased risk of burnout of other parts of the device.
2. A fault in the electrical circuit into which the heater enters. When the circuit breaks down, the washing machine usually continues to function, but the process of its operation becomes longer.
3. Breakdown of the pressure switch. It is possible that the water in the washing machine does not warm up due to a malfunction or contamination of the level sensors.

Important! During the washing process, people often do not pay much attention to the fact that the appliance ended the washing cycle not in accordance with the set time. Often, the technique does not perform a number of functions, not because of software malfunction, but by signaling the presence of malfunctions that require urgent elimination.

to the contents ↑

Where to start?

Before changing the heater in the washing machine, you need to determine its location. In the modern market of household appliances there is a wide variety of washing machines from various manufacturing companies. Naturally, they have some design features.

Important! Often, the heater is located in the lower part of the tank.

Regardless of the brand of the washing machine and its design features, observe the following rules:

1. Before proceeding with repairs, be sure to unplug the washing machine from the mains, pull out the plug from the outlet.
2. Completely remove water from the tank. To achieve the best possible result of this procedure, use a drain filter or a hose.

Important! Keep in mind that a small amount of moisture can remain in the system, so be prepared to use a mop, rag and basin.

For removal of the spent heating element and installation of a new heating element, you may need the following tools:

• flat and cross-shaped screwdrivers;
• carbide or socket wrench.

to the contents ↑

How to change the heater in a washing machine Samsung?

The failure of the heating element is the most popular malfunction for most washing machines. The heater on the Samsung washing machine often has to be changed due to the chemical composition of the water from the central water pipe and its level of rigidity. Let us consider this process in more detail using the example of Samsung.

Replacement of the heater in the Samsung washing machine can be performed independently. To achieve the desired result, follow these tips and recommendations:

1. Disconnect the washing machine from all connected utilities - water, electricity and sewage.
2. The heating element of the washers from this manufacturer is located under the plane of the tank, behind the front panel.
3. Having found the necessary unit of construction, disconnect the supply wires and the temperature sensor from the heater.
4. Unscrew the heating element connection by using the appropriate key for this purpose.
5. Carefully remove the heater from the body of the washing machine.
6. Clean the location of the component from debris and foreign contaminants.
7. Install a new heating element.
8. Assemble the washing machine, following the reverse procedure.

Important! Use only original parts that are designed by the manufacturer to service Samsung washing machines. You can buy a suitable heater in the service center or the shop of original spare parts.

to the contents ↑

How to replace the heater in the washing machine Indesit?

Indesit is a famous manufacturer of household appliances and washing machines from Italy. The products of this brand are distinguished by a high level of reliability and quality, and therefore enjoys great popularity among the owners of different countries.

However, even reliable and modern technology is not immune from the failure of the heating element, which is its main component.

Important! It is possible to determine the malfunction of this part by mistake F08, which will be displayed on the information display several minutes after the start of washing.

To replace the heater in the Indesit washing machine, follow the instructions below:

1. The structural feature of the styarok from the Indesit manufacturing company is the location of the heating element at the rear of the structure. Therefore, before replacing the heater in the Indesit washing machine, you need to turn the device to get the most comfortable access to the required part.
2. Disconnect the washing machine from all communications - sewage, water and electricity.
3. Remove the back cover of the appliance by unscrewing several fasteners using a screwdriver.
4. Locate and remove the drive belt.
5. From the located on the left lower part of the TEN construction, disconnect all wires and sensors.
6. Remove the mounting bolts, and carefully remove the heating element.
7. Clean the tank and the installation surface of the parts from debris, rust and scale.
8. Install a new heater and assemble the machine, following the reverse procedure.
9. Check the operation of the washing machine.

Important! After installing a new heater, the device can be checked for operation by using a self-diagnostic system built into modern models of washing machines.

In this article, we described how the heating element in the washing machine is self-replacement. We hope that henceforth your stiralka will please with excellent work capacity and will not cause unnecessary trouble.