Washing machine Hans - error codes

German washing machines "Hansa" are reliable and have a high class of components, assemblies, which is proven intime of use by many consumers. But like many other types of household appliances, the units of "Hansa" are not immune from the occurrence of malfunctions and breakdowns. On modern models of automatic washers there is a display on which special symbols are displayed, indicating the occurrence of a defect. So, the subject of this article: washing machine "Hansa" - error codes of different models.

to the contents ↑

Hansa PC error codes:

• E01 - the code that appears when the door breaks and the laundry tub has failed. To eliminate such a problem, it is recommended to replace the door lock and test the control system connections.
• E02 - this error code of the washing machine Hansa notifies about the slow set of water in the tank. It is necessary to check the water supply pressure and make sure that there are no foreign objects in the pipes and hoses.
• E03 - a set of symbols that indicates that the water is long drained from the tank. The drain filter and pump should be inspected. If there is a clog, clean the parts thoroughly. If there is a serious breakdown, it is best to replace the part with a new one.
• E04 - such a set of characters appears as a result of overflow of the hatch with water. The cause may be a malfunction of the water sensor or high pressure in the water supply. To solve this problem, it is necessary to normalize the pressure in the pipes or replace the pressure switch with a new one.
• E06 - notifies about dysfunction of signal "empty hatch".The cause of such a malfunction can be a clog in the drain pipes or a defect in the control system. It is necessary to check the hoses for clogging, and also to verify the operation of the control module.
• E32 - the error code is displayed in the case of a dysfunction of the thermostat washing machine "Hansa".It is necessary to test the connections of all contacts in the temperature sensor and the control module.
• E42 - occurs as a result of locking the door of the loading tank. The cause of this problem can be damage to the wires from the control system to the door, as well as the failure of the lock of the loading hatch. To eliminate this problem, you need to test the connection connections or replace the lock of the cover of your device.
• E31 - this combination appears as a result of a short circuit in the thermostat. These symbols occur when there are defects in the wires in the temperature sensor. It is necessary to check all connections for damage, if any, replace the thermostat with a new one.

to Contents ↑

Hans Hans PA Errors:

• E04 - this error code of the washing machine Hansa indicates that the hatch has overflowed during washing. The cause of this problem is a malfunction of the water sensor or increased pressure in the water pipes. It is necessary to replace the pressure switch with a new one or normalize the water pressure during washing.
• E05 - notifies about the breakage of the thermostat. This combination of symbols arises due to damage to the temperature sensor wires or control system dysfunction. It is necessary to check all the connections of the thermostat and control module.
• E14 - appears on the display as a result of a defect in the electronic controller. Often the cause of this error is a power failure. It is necessary to check the connection of the unit to the network. If the alphanumeric combination does not disappear from the display, the electronic controller must be replaced.
• E03 - occurs due to the fact that the water sensor has not generated an alert for an empty tank when draining the water. The problem occurs due to defects in the drain hose and pump. In addition, the cause may be a clog in the drain pipe or filter machine-gun. It is necessary to remove the blockage from the pipes, if any, replace the spare parts if serious defects are found.
• E12 - the error appears due to the detection of water leakage into the machine tray. It is necessary to check the efficiency of the "Aquastop" system and its contact connections.
• E08 - occurs due to the fact that there was no signal on spinning. It is necessary to check the tachogenerator and the electric motor. If there is damage, replace the spare parts.
• E15 - notifies about controller dysfunction. As a result of such a malfunction, the washing machine "Hansa" does not perform the specified programs. Replace the electronic controller with a new one.

to contents ↑

Frequent faults of washing machines Hansa

All error codes of washing machines "Hansa" appear as a result of various malfunctions. In most cases, the owners of Hansa equipment contact service centers for the following reasons:

• Drain pump function;
• Discharge filter drain;
• Defect in bearings and seals;
• Thermostat fault.

If you are not sure of your technical skills, it's best to contact the master. He will advise you and very quickly return your device to life.

to the contents ↑

Tips for caring for the washing machine Hansa

In order not to contact the master for help and to increase the service life of the automatic typewriter, it is necessary to perform certain manipulations:

1. Timely clean the drain filter from dirt.
2. The body of the machine must be cleaned with a soft sponge and detergent.
3. Once every six months, it is necessary to flush the drain pipe.
4. The powder compartment must be kept clean. To do this, once a month, it should be washed with running water.

From this article you learned the decoding of error codes for washing machines "Hansa", thanks to which you can recognize the cause of the failure and find out the need for repair. We wish you as little as possible to deal with the problems of much-needed household appliances, and especially not to spend a lot of time and money to repair it.