How to fold a sheet on an elastic band?

A sheet with an elastic band at the bottom is a relatively recent innovation of domestic producers, although abroad this type of bed linen has been used for a long time. It is very convenient, because it does not slip and does not twist during sleep, but some housewives have trouble with storing it. How to fold a sheet on an elastic band so that it does not take up much space and looks neat? Each housewife wants to fold the underwear beautifully, so that it does not crumple and occupies a minimum of space in the closet. It's not so difficult to do, if not to hurry, to show accuracy and ingenuity. We will talk about different ways of compact folding of such bedding in this article.

to the contents ↑

Advantages of a sheet on an elastic band

I would like to note that slight difficulties with folding and ironing of this type of sheet are largely covered by its advantages:

• This sheet easily replaces the cover on the mattress if you do not have it.
• This option is especially convenient for children, as it keeps the form, no matter how intensively the kids move on the bed.
• Wash similar underwear very easily, as well as dry.
• Soft fabric is quite durable, which makes the sheet on the elastic band a profitable purchase.

to the contents ↑

How to lay down a sheet on an elastic band?

To save space in the closet, these sheets need to be folded instead of just crumpling. This will also help keep your underwear in order. To do this, you will be very useful knowledge of how to lay down a sheet on an elastic band. In fact, this is a simple process and as soon as you master it, you will very quickly put in order the bed linen that was going to be put aside in the closet.

Procedure:

1. Hand fingers in two corners and stretch the sheets along the entire length.
2. Attach one corner to the other. As a result, you must have two corners on one hand.
3. With a free hand, raise the next angle from the bottom and put it on the already "occupied" arm.
4. Do the same manipulations with the fourth angle.
5. Shake the formed rectangle.
6. Lay out the sheets on a flat surface( bed or table).Smooth out all the wrinkles.
7. If you did everything correctly, then the rubber band will run from two adjacent sides.

Important! Perhaps, in order for the edges with the elastic band to lie flat, they will have to be ironed out.

1. Now fold the sheets across and along. You will have a neat, completely non-removable package.

That's all the stages of the seemingly impossible process.

Important! Folding the sheet on the rubber band in this way, it will look the same as a folded regular sheet. Repeating the procedure several times, you will later very quickly and without visible defects to fold similar products.

to the contents ↑

Do I need to iron the sheet on the rubber band?

There are a lot of advantages of this product, but the question of how to iron a sheet on an elastic band often puts the housewives at a dead end before it is acquired, and some of them stop buying altogether. Let's try to understand all the subtleties of ironing such bed linen.

Many manufacturers present their products as sheets that do not need to be ironed. This is explained by the fact that even with the best quality ironing of an ideal surface, it is simply impossible to achieve. Therefore, it makes sense to save your time and do without this process. If you do not ironing linen is unacceptable, you only need to choose the most suitable option, how to iron the sheet on the elastic band.

Important! Terry sheets on the elastic do not need ironing, because the effect of the iron makes them not so soft. All other fabrics should be ironed at the appropriate temperature. This information can be found on the label that is sewn to the inside surface of the sheet.

From the ironing process today have done a whole science. Below are the arguments, after studying which you will necessarily want to know how to properly iron the sheet on the elastic, and understand where and what you previously made mistakes.

If you mis-iron the sheet, it:

• will lose its beautiful appearance;
• may become unusable ahead of time;
• will lose the smell of freshness that usually appears after washing;
• can become unpleasant to the touch, and you will not want to sleep on such underwear;
• will find creases and fabric defects that can not be eliminated;
• will become dim.

Think about it, would not you be sorry to part with an almost new set of bed linens just because it was not properly patted? So, what do you need to know to prevent this?

to the contents ↑

How to iron a sheet on an elastic band? Overview of possible options for

Ways how to make a kind of sheet on an elastic band presentable with iron, there are several. The hostess, having tried each of them, chooses the optimum variant for herself and next time does not think about the question of how to iron a sheet on an elastic band. Let's consider each of the methods in more detail.

Method number 1

The simplest option is to iron only the middle of the sheet and not torment yourself, smoothing the edges, which, as it is obvious, are almost impossible to smooth out on the board.

Important! Even if you spend a couple of hours, smoothing the folds under the elastic, still the result will be minimal. It will look like a sheet and did not iron at all.

Method # 2

This method is quite original. It is necessary to put the sheet on the mattress, and iron directly on it. This method allows to achieve the most optimal position of the sheet for smoothing all visible folds. But you should consider the type of tissue. The result will depend on it to a greater extent.

Method number 3

In case you still want to get an almost perfectly smoothed sheet, it needs to be ironed in a circle:

• So, first of all, iron the middle.
• Then you have to start stroking on one side and move along the perimeter, further pushing the edge of the fabric. In fact, it's quick and easy. Even if there are small hiccups somewhere, then when the sheet stretches onto the mattress, you will not see them.
• Much depends on how strong the fabric is against the mattress. In case the sheet adjoins closely, even your not perfect ironing will be invisible.

As you have seen, patting stretch sheets, which often causes a lot of problems, is not so difficult. Using simple recommendations from the article, the work of the ironing board for you will cease to be so painful.

to the table of contents ↑

Useful tips for ironing bed linen

You may say that you always adhere to all possible rules: you avoid the creases and spray with water, but after all iron sheets are still shapeless, and in appearance they are very far from those,what were after the purchase. To prevent this from happening, there are several additional secrets that are not known to every hostess:

• The place for ironing should be well lit.
• Excellent, if you have an ironing board, if not - it's also not a problem. It is enough to lay a table with a heavy dense cloth and make sure that it does not slip. If necessary, ironing board correct for height of your height, so it was convenient.

Important! If you need to bend during ironing, you will quickly get tired, and the whole process will seem very difficult for you.

• If the surface for ironing is too small, and the sheet is large, you need to fold the fabric four times. At the same time, one should try not to iron out the bends and prevent the formation of pronounced folds. So your sheet will look more aesthetic.
• An iron with a sprayer is very good, but sometimes it is much better to use a spray gun when ironing the laundry, putting the gauze over the fabric.
• Try not to dry the sheets and duvet covers after washing. It is better to iron them slightly damp. In this case, you will not need spraying at all.
• You need to keep track of where you put the iron when you turn over or straighten the fabric. In no event should it be placed horizontally on another part of the laundry. So the fabric can burn to the sole of the iron, and in this case you risk ruining the product.
• If during the ironing suddenly a nuisance occurred - you slightly burned linen or cotton cloth and the material is left with a yellow stain, you can get rid of it with the help of borax( 1 teaspoon per glass of water).
• Also, make sure that water does not get on the iron, as a short circuit may occur.
• Often when you do laundry, the thing is heavily deformed, and the rectangle can easily turn into a curved trapezoid. To correct this defect during ironing, you need to sip the matter for the ends, try to constantly align the fabric.
• Before ironing again with laundry, it is necessary to iron it with your hand and thus check for tissue fractures. After ironing, it will be difficult or impossible to remove them.
• You do not need to iron the same parts of the fabric ten times. If you see that the fabric is already smooth and smooth, then - it is enough, and it's time to finish ironing.
• Immediately after ironing, there is no need to stuff bed linen in the closet, it's better to let it cool down.

Important! To hide clothes on the shelf of the cabinet is recommended after ironing after 1,5-2 hours.

These short and simple but very practical and useful tips will help you cope with ironing in a short time. In doing so, you will do all the work perfectly and will be satisfied with the result.

to the table of contents ↑

Useful tips for storing bed linen

Keep the sheets on the elastic, like all the rest of the bedding, should also be correct. Failure to follow simple rules will result in the loss of a beautiful appearance, the appearance of an unpleasant odor and the rapid aging of the tissue. To avoid such a deplorable result:

• It is better to keep all the items from the bed-clothes set together, put them together in a pile and bandage them with tape or rope. So your bedding will be stored in order, and you can more effectively use the storage space. In addition, it looks beautiful.
• For convenience, you can also store inside the pillowcase sets of sheets. So you can put two or three sheets on an elastic band in one pillowcase. A set of laundry is also placed in the pillowcase. Thus, your cabinets will become more accurate, and all the necessary items will lie together, which will greatly facilitate the search for the right thing.
• Winter sets of soft and dense materials( terry cloth or flannel) are better to be stacked separately. With the onset of warm days, they can be hidden in the far corner.
• Not only drawers of chests of drawers are suitable for storage of laundry. It can be folded in cardboard boxes and placed on any cabinet shelf.

Important! It is unacceptable to store even new bed linen in plastic bags.

• If you have the opportunity to buy two or three suitable sets at the same time, then mattress sheets, simple sheets, and pillowcases( the same size) will be interchangeable. Another time it will be difficult for you to find the same pattern, so try to buy them all at a time.
• It is very convenient to use color coding for bedding in your closet. For example, yellow sets of linen for single mattresses, blue for children's mattresses, and beige ones for double mattresses.

Important! Bed linen should be changed at least once every 10-14 days, and immediately washed.

Do not be afraid to buy a sheet on an elastic band because of special care for it. As you can see, it is almost as easy to fold and pat as the usual sheet. Therefore, given the dignity and convenience of this element of bed linen, the sheet on the elastic band will be uniquely useful acquisition. Take note of the good advice from this article and all the problems with storage and ironing conditions by themselves will cease to exist for you.