Sink and washing machine under one table top

Washing machines are closely integrated into the lives of modern people, but unfortunately, not everyone has the opportunity to comfortably place it in the already tight space of the bathroom. One of the best solutions to this problem is the sink and washing machine under one counter top. This arrangement of this technique not only saves space, but also looks quite aesthetically. Consider the various options for such an arrangement of the apartment and the advantages, disadvantages of such a solution.

to content ↑

Ways and their features

In a market where there are a lot of different solutions for your bathroom, it's not so easy to choose something that is ideally suited. Therefore, before you go for a purchase, you need to accurately imagine which option will suit you more than others. All options can be conditionally divided into 3 groups. Let's consider in more detail each of them.

Solid-cast worktops

This case assumes that the table top and the sink are a single one-piece structure. As a rule, they are made of glass or stone. More economical material is artificial stone.

Important points:

• The advantage of such a sink and washing machine under one table top is the absence of a place of accumulation of pathogenic bacteria.
• A disadvantage can be considered a considerable cash costs when choosing and installing such a solution.

Variant with mortise shell

This design lures the simplicity of installation in comparison with the previous version, and is more economical in financial terms. This option contains, as a rule, not only a washing machine but also shelves for small things.

Important! The disadvantage can be called seams near the sink, which will collect moisture, which means - there is a risk of bacteria.

Overhead sink

This variant is very original:

• The advantage is the absence of a joint.
• The disadvantage is the high cost of this solution.

to the contents ↑

How to mount?

Highlight and classification of countertops by the method of fastening. There are 3 main options - hinged, cantilever and floor.

Attached systems

When choosing this option, it is worth considering the strength of the walls, to which it will be attached using special brackets.

Important! The advantage of this option is the small size of the entire system.

Console

This option is the most common. It is a frame that is attached to both the wall and the floor. This allows you to remove the load from the walls, while it takes not much more space than the hanging countertops.

Floor

Such constructions represent a curb that does not attach to anything. This option is suitable for those who do not want to destroy the integrity of walls and floor.

to the table of contents ↑

Material variants for the

countertop construction In addition to the structure itself, the sink with the top of the washing machine also differs from the manufacturing material. There are even more options.

Stone

Stone table tops look always expensive and beautiful in any performance. Its surface is sturdy, not susceptible to detergent.

Important! This version has a high wear resistance and is not afraid of sudden changes in temperature and high humidity.

Glass

This version is not very popular, as it requires careful care and careful handling.

Important! Glass looks not always good, because through the transparent surface you can see the whole construction under it.

Tree

Wood brings comfort and comfort to your bathroom. In the manufacture of these countertops use solid wood species - oak, needles or yew. But the high cost, low abrasion resistance and quivering care for this kind of material make such a variant of the material not popular.

Laminated chipboard and MDF

DSP and MDF are increasingly found in the manufacture of furniture for the home, in particular for bathrooms. This can be argued by the fact that this furniture looks nice and cozy. Execution of the form can be completely different and confined to the imagination of the owner. The cost does not exceed the cost of models from another material.

The modern water-repellent coating makes it resistant to moisture.

Important! There is also a disadvantage, with the slightest damage to the surface of such material, it is likely to swell and begin to separate, which looks unaesthetic. So - in a short time such furniture will have to be replaced by a new one.

Acrylic

This material looks optimal in the ratio of price and quality. An important factor is that it has a lot of color solutions. The sink with the top over the washing machine made of acrylic looks original, has a very high moisture resistance. As well as MDF, it can be manufactured in any suitable form.

Important! When choosing a product from this material, it is very important to pay attention to the manufacturer. Give preference to proven firms with good reviews, because the quality of the product largely depends on the quality of the product itself.

to the contents ↑

What should I look for?

When choosing a design such as a sink and washing machine under one tabletop, do not neglect a number of rules:

1. Choosing the smallest option, and as a rule - it's hanging tops, do not forget to check the strength of the walls and the design itself. Otherwise, you risk finding it broken due to insufficient strength.
2. When choosing a ready-made version in the store, put a couple of centimeters on the measurements taken from the washing machine. This will help not only protect the machine from moisture during use, but also smooth out the inaccuracy of measurements, if any.
3. Make sure that your washing machine is suitable for installation under this design. Otherwise - you risk to fight against the corners of the machine, which protrude from under the installed structure.

to content ↑

Advantages and disadvantages of

Like any other solution for placing furniture, the tabletop above the washing machine in the bathroom has its advantages and disadvantages. Consider the most significant of them.

Advantages of

There are a number of advantages that this design gives:

1. An additional working surface that saves space on shelves and in a closet, which is especially important for small bathrooms.
2. Masking of pipes and other communications. The design allows you to hide everything under the countertop and do not waste time cleaning up everything under the screed or floor.
3. Aesthetic appeal. Such constructions look very stylish and modern.
4. Ease of installation. All the works of this variant can be easily carried out without the help of specialists.

Disadvantages:

1. The most difficult installation of such a design is the installation of a sink. The non-standard shape of the siphon requires time to search for it.
2. The drainer is the next drawback that stands out in this solution. The drain is more prone to blockages, so it requires more attention on your part.

to the table of contents ↑

Care tips

The care of the table top depends on the type of material from which it is made:

1. The stone top is cleaned with a cloth soaked in a special impregnation.
2. Glass or acrylic surfaces should not be cleaned with abrasives, hard wool. They scratch the surface. The best way to clean is a glass cleaner and paper napkins.
3. Wooden surfaces should be oiled occasionally.
4. Worktops made of particleboard or MDF should always be wiped dry with a soft cloth.

to the contents ↑

Installation of

Let's talk a little about installing this type of furniture. It also has its small nuances:

1. If there is a sewer pipe behind the washing machine, the sink with the countertop must be wide enough.
2. When installing, it is important to ensure that all wires are well insulated, no moisture gets on them.
3. Make sure that the edge protruding above the washing machine is wide enough to prevent water from entering the machine.

In this article we have considered the most popular option for the arrangement of compact apartments - a countertop above the washing machine in the bathroom. We have disassembled all the advantages and disadvantages of this solution. We hope you could make sure that this is the best option, and we were able to correctly choose the type of material and system as a whole.