- Where to start?
- was blocked in the cooling chamber. The drainage hole in the
- was clogged. A crack was formed in the container, where the condensate flowed
- Incorrect installation of the
- device. Drain pipe failure
- . Depressurization
. If in the morning, when you entered the kitchen, you found out that the water was flowing from the refrigerator, or saw that it accumulated inside it, it means - your equipment is out of order and it needs to be repaired urgently. Why does the refrigerator flow, and where does the water that collects in it come from, we learn from the article described below.
to the contents ↑Where to start?
To understand why a refrigerator is flowing, you first need to determine exactly where the water flows from. For this, we carefully examine the equipment from all sides:
- pay attention to the floor;
- look inside the fridge and freezer;
- carefully inspect the front panel.
Because without this unit everyone has to tightly, especially in the heat, you need to immediately eliminate the breakdown. Let's see what the problem is, because there can be many reasons, but if the frost function is still working, then it will not be difficult to cope with the breakdown.
to the contents ↑The
drainage hole was choked in the refrigerator compartment. In each refrigerator there is a special compartment with a hole, from which excess moisture leaves the tank. The refrigerator flows most often because of the formed clog. It blocks access to the hole, accordingly - the moisture has nowhere to go and it begins to flow directly to the floor.
To cope with this problem is easy - you need to remove dirt and rubbish from the right place. You can use a thin stick or a tube for this.
to the contents ↑The drainage hole in the freezer
is clogged. In this case, water accumulates not only on the floor, but inside the refrigerator, and around the freezer an impressive crust of ice forms. The problem is solved in the same way as in the previous case, but you only need to remember that the freezer drain is in the enclosure itself. Therefore, without the skills of such work, it is better not to go there yourself and call the master.
to content ↑A crack has formed in the container, where the condensate flows to the
. If there is no water inside the unit and everything is fine with it, then most likely the problem of what the refrigerator is flowing is that the liquid collection tank cracked. According to all the rules, the condensate must drain from the refrigerator into the drainage hole, then enter the drainage pipe and flow into a special tray located near the motor-compressor. It is in this place that water evaporates.
If this tube is damaged or the tank bursts, the water will flow straight to the floor. To solve the problem, you just need to purchase a new tray.
to the contents ↑Incorrect installation of the
device. Is the fridge from below flowing? The reason, most likely, is that it was installed incorrectly, and because of this the door is not closed properly. Remember, but did not you move it recently. To check how much it is level on the floor, you can use the building level, which will help you eliminate the skew.
Important! If you do not have the opportunity to install the unit smoothly, then give preference to the option when it is slightly tilted back. So the door will always close tightly under pressure of its own weight.
to Contents ↑Drain Sump Failure
If the drainage tube suddenly becomes damaged, the refrigerator will be completely dry inside, and the frost and frost, which is unusual for it, will not appear inside the freezer. Just water will flow directly to the floor instead of evaporating naturally in a special tank.
The reason for this is most likely the wrong transportation or rearrangement of the refrigerator. You can solve the problem yourself, without resorting to the help of a master. To do this, move it away from the wall and find the desired tube, and then insert it back into the opening of the tank.
Important! Even such a trifle, as a leaky door, can disable the motor-compressor, because it experiences a huge load when producing additional amounts of cold. If it works day and night, then it will just burn one day.
to the contents ↑Depressurization
Why does the refrigerator run inside and on the walls it gets ice? Most often this is due to insufficient fit of the door to the body, because of which the device begins to produce excess cold, and because of the slightly open door, it immediately melts.
How to solve the problem?- Proceed as follows:
- It is necessary, first of all, to adjust the door hinges.
- If this does not help, then the next step is to replace the seal.
- With the same breakdown, water can accumulate right under the boxes, where, as a rule, fruits and vegetables are stored.
And remember, it's not so important, from under the refrigerator water flows or accumulates inside it, there is definitely a problem and it can not be ignored. Of course, your universe will not be able to arrange a flood of universal scale, but the liquid that flows from it clearly indicates its breakdown. Any technique needs to be prevented and should not be forgotten.
