Litter in the pipes - elimination at home

Well, who among us does not know what sewer pipes,blockages in them and the repair team from the housing office. As a rule, they should come and fix all the problems immediately, as soon as they learned about them. But what if they do not come for a long time and the pipes are clogged? This article is aimed at solving this particular problem: clogging in pipes - elimination at home.

to content ↑

The main causes of clogging of sewer pipes

There are not so many causes of clogging of the sewage system and pipes. They are:

• Non-observance of general installation rules, incorrect pipe inclinations, as well as the use of poor-quality cement mortar during installation of the toilet bowl.
• Foreign object entering the pipe.
• Creates a very thick layer of build-up on all internal walls of the pipe due to prolonged use.
• Use of improper care or its complete absence.

To make the system work, it is necessary to clean the sewer pipes at home. And the sooner you do this, the better, otherwise - an unpleasant smell can be formed, from which it will be incredibly difficult to get rid of.

to the contents ↑

Emergency assistance during the occurrence of blockages in the pipes

Since one of the main reasons for the reduction in the capacity of the pipe is the fat coating, the very first thing to do is to drain the sink with a rag and try carefully, but gently pour it into the drainseparation of boiling water.

In the event that the water began to leave with time, it is necessary to continue the procedure. After you can clean the blockage in the sewer pipes, we recommend thoroughly flushing the entire system with hot water.

to content ↑

2 effective ways to eliminate blockage

One of the best methods by which you can solve the problem of how to eliminate blockage in pipes involves the use of table vinegar and soda. This method is most effective, but it requires careful compliance with all instructions for use. The bottom line is as follows:

1. Dry the sink.
2. With a teaspoon, gently fill the drain hole with ½ cup of baking soda.
3. Prepare a remedy for corking in advance. This can be an ordinary kitchen rag or a special plug for baths and shells.
4. Pour half a glass of vinegar into the drain.
5. Immediately tightly clog the drain.

Important! If you use a cork, we recommend that you squash it with an object that will fall under your hands, so that when it forms a gas from a chemical reaction, it does not jump out.

Another popular method of eliminating blockage in sewer pipes is the use of ordinary lemon. It is necessary: ​​

• squeeze a small amount of fresh lemons into the drain hole;
• leave the pipe without ordinary running water for about 1 hour.

Important! You can replace fresh lemons with one half cup of concentrated lemon juice.

Lemon is an effective tool that is almost always at hand

In order to avoid costly replacement of sewer pipes, it is necessary to carry out similar preventive cleaning of pipes at least once a quarter.

to content ↑

Chemistry during the fight against blockages

Chemicals are quite effective and allow literally 2-3 minutes to eliminate blockage in pipes at home without calling the master if the plug is not global.

Important! The most popular during the fight against blockages are such means as "Mole", "Pothan", "SANFOR", "Domestos", "Mr Muscle".

The main rules to remember when using them:

1. All the methods listed in this section are quite dangerous and require mandatory availability of protective equipment, such as: rubber gloves, face mask and glasses.
2. It is necessary to ensure the flow of fresh air into the room.
3. Modern chemical means, which are designed for cleaning sewage pipes, are of two types: on acidic, and also on alkaline basis.

Important! It is forbidden to simultaneously use products that have different chemical compositions.

Rules for the use of chemicals:

1. Pour or pour a small amount of the product into the drain hole, which is intended for cleaning sewage pipes.
2. Add approximately 500 ml of water.
3. Wait for 10-15 minutes.
4. Wash the sewer system with a large flow of running water - at least 10 minutes.

Important! Eliminating pipe clogging at home with chemistry does not always produce the desired result. If the cork is dense or there are several of them, the water starts to leave, but with very insufficient speed. In this case, radical methods will be required: the use of special devices that are designed for cleaning sewage pipes.

to the contents ↑

Mechanical methods for removal of blockages

First of all, we will consider how to clean the entire sewer pipe in a private house.

Important! In modern buildings, plastic pipes and polyethylene pipes are installed more and more often.

Because their walls are sufficiently smooth, in a large number of cases for their cleaning it is enough to pour hot water into the drain hole and take advantage of the help of the plunger.

In the event that, after the first pumping, the water is still very difficult to flow, repeat the procedure until the cork is completely eliminated in your pipe. In difficult situations, when this method does not give proper results, it is recommended to resort to much more complex but reliable methods of eliminating blockages inside the sewer pipes.

Hydrodynamic sewer cleaning

During operation together with domestic sewerage, compact hydrodynamic machines and high pressure pumps are used. A large number of car owners purchase mini-sinks in order to properly care for the vehicle. These units can also help during the cleaning of pipes with a diameter of 50-300 mm. Any of the hydrodynamic aggregates is able to break even the most complex blockage.

Professionals have spiral cleaning machines, which are equipped with nozzles of various diameters. This device is installed next to the toilet or with a sink, a spiral is wound into the drain hole, the machine is turned on, and it starts to rotate the same nozzle. This allows you to easily destroy even the most dense plugs.

Proper use of the cable for cleaning all sewer pipes

A practical host knows that there must always be an ordinary plumbing cable in the house. It represents a steel rod, the diameter of which is 3-5 mm, and it must be made of twisted wire.

General rules for using this device are:

1. Remove the siphon of the sink.
2. If the rope does not have a handle, bend the upper part so that a ring is formed, for which it would be convenient to hold it by hand.
3. Loose the end of the cable inside the pipe and start rotating with a ring, gradually moving the cable deeper and deeper.
4. Periodically, the cable must be removed and then cleaned of dirt and debris.
5. After removing all blockages, install a siphon and flush the system with hot water.

In this article we have acquainted you with the ways of pipe cleaning, as well as with the reasons why they are generally clogged. That is why we hope that this article will help you to think less about how to break through the clogging in the sewer pipes.